Post Buy Requirement
N&
dubai, United Arab Emirates
Add Review

Other Products / Services

Air Cooled Chillers

ECH series, with environmentally friendly R410A refrigerant, represent the best solution for centralised hydronic air conditioning for large areas (such as airports, offices, shopping centres, cinemas, etc.), and offer energy savings in all operating conditions. The multi scroll technology used in the GALAXY TECH series, proportionally adapting the cooling capacity produced to the actual demand from the system, allows a decrease in the hydraulic volume required for thermal inertia as well as considerable energy savings. The high number of compressors (up to 12) and independent refrigeration circuits (up to 4) reduce the possibility of downtime, increasing the level of overall reliability of the system, thus ensuring continuity of operation in a wide range of applications. The modular condensing section allows the progressive stopping of fans according to the instant thermal load, helping to increasebuyantibioticsonline.orgthe seasonal energy efficiency of the units. The GALAXY TECH series is equipped with brazed plates heat exchangers in AISI 316 stainless steel with high energy efficiency and low water pressure drops. Management is entrusted to a microprocessor control that manages completely independently all the main functions, includingbuy zithromax single dosethe adjustments, alarms and interface with the outside.

View Complete Details

Nitrogen

Compressed air from a dedicated air compressor at 10barg enters an Air Pre-treatment Package which comprises of a desiccant air dryer with pre and final filters which removes oil, moisture and particulate from the air. The clean, dry air then passes to the inlet of the nitrogen generator.


The air enters the bottom of the on-line adsorption bed. Oxygen, CO2 and other trace gases are adsorbed by the carbon molecular sieve, allowing nitrogen to pass through to the product buffer.


After a pre-set time, when the on-line bed is almost saturated with adsorbed gases, the system automatically switches the bed to regeneration mode, whilst the 2nd previously regenerating bed comes on-line.


The system operates continuously, automatically switching between beds to ensure a constant flow of nitrogen gas. The purity of the nitrogen is monitored to ensure only gas of the requiredpurity reaches the application.

View Complete Details

Refrigerated Air Dryers

Refrigerant drying cools the compressed air, whereby a large amount of the water condenses and can be separated. The compressed air is then heated so that condensation does not form on the outside of the pipe work system.


The compressed air cooling takes place, via a closed coolant system, where a refrigerant cooling agent is employed. CompAir uses environmentally friendly gasses for this. By cooling the compressed incoming air with the cooled outgoing air in the heat exchanger, the energy of the refrigerant dryer is reduced.

View Complete Details

ROBOX SCREW

Technological innovation and leadership are key elements for the companys progress. International co-operation on the continuous development of new products, prototyping and tests in real-operating conditions represent our commitment to ongoing research for the most suitable solutions to meet the market requirements. Robuschi products are a combination of experience, quality and reliability.



ROBOX SCREW


Pressure vacuum operation (up to 2500 mbar)



The low-pressure compressor unit with the following features:


Silent operation
The high compression efficiency guarantees a low-noise generation, that, with the special silencers and the noise enclosure, allows a ROBOX screw low sound pressure levels:75%)in a wide range of rotation of the compressor (from 100% to 25%), by reducing thus the energy consumption in any working condition.
Moreover, energy savings increase with the use of EFF1 motors and with the new IE3 certified engines.


Monitored operation
ROBOX screw is equipped with a constant monitoringSENTINEL 2:
the new control panel realised and designed by Robuschi.


Compactness
ROBOX screwinnovative design and extremely compact dimensions allow, in the best possible way, the increasing demand for reduced spaces available in the compressors room.
Moreover, the front-access maintenance makes it possible to install more units one next to each other, reducing further the compressors rooms space need.


Ease of installation and maintenace
Easy installation: thanks to the effortless handling through the forklift and/or transpallet as well as the ease of electrical connection to the system (rear auxiliary panel).


Effortless maintenance from the front side:
immediate check of oil level;
easy oil change;
easy replacement of air and oil filters (forced oil lubrication systemwith oil cooling system);
easy adjustment of oil pressure;
simple replacement of belt drive.


View Complete Details

Donaldson Downstream Equipment



ADSORPTION DRYER
Category:Donaldson Downstream Equipment.




  • Description

  • Click Here for Product Enquiry

  • SPECIFICATIONS

  • CAPACITY




Compressed air is an important utility and energy medium applied in many areas of industrial production and often needs to be free of contaminants such

as dirt, oil, and water condensate.The Donaldson Ultrapac 2000 is a complete purification package including a pre-filter, after-filter, and automatic condensate drain, and is designed to produce clean, dry air to -40F/-40C and lower pressure dew points.


The Ultrapac 2000 is the ideal drying solution for compressed air flows under 60scfm @ 100psi because of its compact design and self-controlled operation. Dryer functions and preventative maintenance reminders are automatically monitored using internal micro-electronics. Since this is a heatless regenerative dryer, the only required input is a standard 115V power supply.


Superplus: The Superplus version is an energy saving upgrade to the standard Ultrapac 2000. It is ideally suited for applications requiring transient air demands or irregular use. The Superplus dryer uses a combination of adsorption and regeneration sensors


to extend the adsorption time for each desiccant tower while using a fixed regeneration time; this reduces purge air demands when conditions allow.


BENEFITS


Easy installation and setup


Less maintenance


Minimal downtime for repairs


Increased cost savings



APPLICATIONS

Sterile Air Production:The combination of heat, moisture and oil in dark compressed air pipes are an ideal environment for microbial growth. Removing the moisture from the system will render the microbes inactive spores.


Laser Cutting Machines:To produce clean, reliable cuts, precision lasers need the beam surrounded with clean, dry, slightly pressurized air as it passes through the internal shaping optics to keep dirt and condensate from contaminating mirrors and lenses.



Packaging Equipment:As air expands to delivery mechanical energy to pneumatic devices, its temperature drops and condensation of water will occur inside motors and cylinders. A coalescing filter will not remove gaseous water vapor and therefore the Ultrapac 2000 is needed to protect this equipment.



DESICCANT CARTRIDGE THE EASY SOLUTION

Sealed desiccant provides minimum desiccant abrasion, easy servicing, and long service life.




View Complete Details

Adsorption Dryer











ADSORPTION DRYER
Category:Donaldson Downstream Equipment.




  • Description

  • Click Here for Product Enquiry

  • SPECIFICATIONS

  • CAPACITY




Compressed air is an important utility and energy medium applied in many areas of industrial production and often needs to be free of contaminants such

as dirt, oil, and water condensate.The Donaldson Ultrapac 2000 is a complete purification package including a pre-filter, after-filter, and automatic condensate drain, and is designed to produce clean, dry air to -40F/-40C and lower pressure dew points.


The Ultrapac 2000 is the ideal drying solution for compressed air flows under 60scfm @ 100psi because of its compact design and self-controlled operation. Dryer functions and preventative maintenance reminders are automatically monitored using internal micro-electronics. Since this is a heatless regenerative dryer, the only required input is a standard 115V power supply.


Superplus: The Superplus version is an energy saving upgrade to the standard Ultrapac 2000. It is ideally suited for applications requiring transient air demands or irregular use. The Superplus dryer uses a combination of adsorption and regeneration sensors


to extend the adsorption time for each desiccant tower while using a fixed regeneration time; this reduces purge air demands when conditions allow.


BENEFITS


Easy installation and setup


Less maintenance


Minimal downtime for repairs


Increased cost savings




View Complete Details

UNIVERSAL Steam Boiler








  • Previous

  • Next












  • Previous

  • Next






UNIVERSAL Steam Boiler U-MB
Category:Bosch Boilers.




  • Description

  • Click Here for Product Enquiry

  • Overview

  • Benefits

  • Construction

  • Equipment level




The product designation U-MB stands for UNIVERSAL Modular Boiler (three-pass steam boiler in modular construction). This boiler type consists of several modules, which fulfil your individual requirements perfectly.




View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Nils & Abbas Trading Company LLC (Nils & Abbas Trading Company Llc)
  • PO BOX 26564, Dubai, UAE - 26654
  • Share us via