Post Your Requirement Menu

Welcome User

Other Products / Services

We are leaders in the market for providing best range of Manholes, PP-RCT, STANDARDS PIPE FITTING, FITTING & VALVES STANDARDS and Standards

Manholes

A special segment of production at Peštan are revision and drain manholes. Peštan manufactures manholes, with or without a settling tank, as an integral part of the collectors in gravity systems of wastewater, rainwater or mixed water. Standardly made of polypropylene. The product range of Peštan company has included drain manholes. These products are mainly intended for the collection of rainwater in the rainy sewage systems in individual household installations as well as in systems engineering (collecting rainwater from roads).

View Complete Details

PP-RCT

Material: PP-R Polypropylene-Random Crystalline structure temperature resistance – RAL 6024 traffic green. Requirements: PP-RCT – the new generation crystalline structure (β nucleate) is meeting the requirements of ISO 1043-1, DIN 8077/8078 Group 4, EN ISO 15874. Dimensions/type: d16 up to d500. Working pressure with a reduced wall thickness compared to PP-R:

View Complete Details

STANDARDS PIPE FITTING

ASTM D 1785 - Schedule 80/40 PVC Piping Systems  BS EN 1452-2:2000 (BS 3505:1986) ISO 161-1 DIN 8062 Nominal Size: 1/4 (inch) – 24 Nominal Size: 20 (mm) – 315

View Complete Details

FITTING & VALVES STANDARDS

ASTM D 1785 - Schedule 80/40 PVC Piping Systems BS EN 1452-2:2000 (BS 3505:1986) ISO 161-1 DIN 8062 Nominal Size: 1/4 (inch) – 24 Nominal Size: 20 (mm) – 315

View Complete Details

Standards

UPVC pipes and fittings are manufactured as per the following standards. Above Ground : BS EN 1329-1 : 2000 This standard supercedes BS 4514 : 1993 and BS 5255 : 1989. Below Ground : BS EN 1401-1 : 1998 This standard supercedes BS 4660 : 1989 and BS 5481. The pipes are supplied as follows: 1 1/4” (36mm), 1 1/2” (43mm) & 2” (56mm) pipes are supplied with plain ends. 3” (82mm), 4” (110mm), 6” (160mm) & 8” (200mm) pipes are supplied with solvent cement socket or rubber ring 

View Complete Details

PVC - U Pipes

Material: Polyvinyl chloride plasticized stabilized with calcium-zinc – RAL 8023 orange/brown. Dimensions: DN 110 up to DN 500. Working pressure: non pressure gravity system with push fit connection. Applications: PVC-U pipes and fittings for underground drainage in ring stiffness SN4 and solid wall pipes in Sn8. Advantages: High degree of strength, elastic response, long-term stability, chemical and abrasion resistance, life time up to 100 years, quick installation, highly costs effective, ecological stabilizer calcium-zinc – better for health and safety reason compared to other solutions like lead, chemical resistance from pH2 up to pH12.  

View Complete Details

UPVC SWR Drainage Fittings

Material: Polypropylene mineral-reinforced – PP RAL 7035 light grey color. Requirements: Skolan db is manufactured according to Z-42.1-217 DIN EN 1451-1 in association with DIN 19560-10 and meeting the sound-absorption requirements as per DIN 4109. Dimensions/type: DN 50 up to DN 200. Working pressure: non pressure gravity system with push-fit connection. Applications: Soundproof in-house drainage and waste water system that is meeting the applications of installations and dimensioning according to DIN EN 12056 and 1986-100. Advantages: Skolan dB stops noise = wall thickness = quietness = comfort of living, Fraunhofer certified as soundproof 20dB without a special clamp at 4l/s according to DIN 4109 and VDI 4100, classified as class B2 flame resistant, resistant to chemicals in the range of pH2 up to pH12, corrosion-proof, easy to install, Constant quality checks, increases the property value, for use in all areas of building construction, excellent mechanical and acoustic properties, quick installation, ecological raw material

View Complete Details

Thermoplastic CPVC pipe

Thermoplastic CPVC (Chlorinated Polyvinyl Chloride) is light, flexible, durable and provides exceptional corrosion resistance. Due to these and other properties of this high quality thermoplastic, substantial savings can be realised during installation and ongoing service life. CPVC can handle temperatures up to 210°F (90°C). CPVC thermoplastic is highly resistant to acids, alkalis, alcohols and many other corrosive materials. CPVC is ideal for process piping as well as most service pipe applications.  

View Complete Details

PPR Pipes & Fittings

Material: PP-R Polypropylene-Random Copolymerized – RAL 6017 may green. Requirements: PP-R pipe systems fulfill the requirements of DIN EN ISO 1874 and DIN 8077/8078 Group 4 plastic pipe systems for cold and warm water installations. Dimensions/type: d16 up to d500. Working pressure:  Cold water 20°C up to 20 bar  Hot water 70°C up to 10 bar  Heater 70°C up to 3 bar Applications: Drinking water, warm water, heating, biogas plants, sanitary applications. Advantages: All our fittings are fully injection molded and therefore without any weakening factors. Compared to fabricated or segmented items (weakening factors ISO 4427-3:2007). Offering the technically correct solution. “Elbow“ instead of “bend” is another proof for high quality “Made in Germany”. Approved in most countries all over the world including the USA.

View Complete Details

GI MI PIPES FITTINGS

Elbow 90D, Elbow 45D, Union, Cap, Socket, R/Socket, Bush, Tee, R/Tee, Plug  Types - Banded Type Heavy Duty and Collar type light duty Connection - BSPT Thread (1/8" to 6") and NPT Thread (21/2" to 6") Nominal Size: 1/8 (inch) – 6

View Complete Details

MS Butt-Weld Fittings

Elbow 90D, Elbow 45D, Cap, Tee, R/Tee, Concentric Reducer, Eccentric Reducer Connection -Welded Schedule - STD, SCH40, SCH80, XS, SCH160 Grade - A234 WPB Nominal Size: 1/4 (inch) – 60

View Complete Details

MS Threaded Fittings

Elbow 90D, Elbow 45D, Union, Cap, Socket, R/Socket, Bush, Tee, R/Tee, Plug Connection - Threaded or Socket Weld Pressure - 1000PSI , 2000PSI (2M) , 3000PSI (3M) , 6000PSI (6M) Thread - BSPT (1000PSI), NPT (2000PSI, 3000PSI, 6000PSI) Grade - A105/A105N Nominal Size: 1/4 (inch) – 4

View Complete Details

SS Butt-Weld Fittings

Elbow 90D, Elbow 45D, Cap, Tee, R/Tee, Concentric Reducer, Eccentric Reducer, Stub End  Connection -Welded Schedule - SCH10, SCH40 Grade - SS304 / SS316 Nominal Size: 1/4 (inch) – 12

View Complete Details

SS THREADED FITTINGS

Elbow 90D, Elbow 45D, Union, Cap, Socket, R/Socket, Bush, Tee, R/Tee, Plug Connection - Threaded or Socket Weld Pressure - CL150 low pressure fittings & CL3000 high pressure fittings Thread - Threaded or Socket Weld Type - Plain End & Banded Ends Grade - 304/304L & 316/316L

View Complete Details

Brass Fittings

Elbow 90D, Elbow 45D, Union, Cap, Socket, R/Socket, Bush, Tee, R/Tee, Plug Connection - BSPT Thread Nominal Size: 1/8 (inch) – 4     American standards ASME B16.3 Malleable Iron Threaded Fittings ASME B16.39 Malleable Iron Threaded Pipe Unions ASME B16.14 Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads ANSI / ASME B1.20.1 PIPE THREADS, GENERAL PURPOSE (INCH) ISO standards ISO 49 British standards BS143 & 1256 Threaded pipe fittings in malleable cast iron and cast copper alloy BS 21 Pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions) BS EN 10242 Threaded pipe fittings in malleable cast iron  

View Complete Details

Filter Housing

High Quality RO Membranes Competitive Prices Large Stock for Quick Delivery

View Complete Details

STEEL CLUSTER FILTERS

High quality polypropylene construction offers reliability and chemical resistance Available in a variety of colors to create an attractive product Available in a variety of in and out connection sizes to accommodate most line sizes The standard design fits most standard filter cartridges in the industry

View Complete Details

Automatic Water Softener

Diffusers Hub and Lateral Threaded Tank Adapters Vacuum Breakers Wrenches Flanged Adapters

View Complete Details

MEDIA FILTERS CONTROL VALVES

Valves for Single & Twin Filters/Softeners

View Complete Details

RO COMPONENTS - FILTER CARTRIDGES

Filters Housings Filter Housings Membrane Housings Fittings UV Sterilizers Pumps and Transformers Accessorie

View Complete Details

commercial products

RO Desalination Systems Water Softeners Water Coolers

View Complete Details

Swimming Pools Filters

Sand filters Cyclone Pre filter Hydrocyclone Cartridge filters Diatomaceous Earth filters Nano Fiber Filter Mono blocs Valve manifold Multiport valves Compacts filtration housing Filtration accessories Filtration media

View Complete Details

BASIN EQUIPMENTS

Skimmers Main drains Level regulators Wall conduits Inlets Drain grilles Accessories equipment

View Complete Details

installation systems

The installation systems from Geberit& RAK Ceramics offer great design freedom and flexibility. They are used in renovation projects and new buildings. The wide range of products includes installation systems, installation elements, building blocks and concealed cisterns, and guarantees safe planning, calculation and implementation processes for both pre - wall and in wall installations.

View Complete Details

CISTERNS AND MECHANISMS

Geberit& RAK Ceramics flushing systems are particularly noteworthy for their clean flushing out, economical water consumption, attractive design, customised functionalities and pleasantly quiet operation. This is especially true of the GeberitAquaClean shower toilets, which combine hygiene and comfort with elegant design

View Complete Details

FAUCETS AND FLUSHING SYSTEMS

Hygiene, functional reliability and highly economical use are the most important benchmarks for this product line. It includes electronic washbasin taps, pneumatic and electronic flushing systems for urinals and toilets and complete urinal solutions. The water-saving and energy-saving systems are available in different designs.

View Complete Details

WASTE FITTINGS AND TRAPS

Geberit& RAK Ceramics offers maintenance-free, noise-insulated and functional drains and traps. These fittings allow for simple connection and operation of bathtubs and shower trays, kitchen sinks, urinals and bidets, as well as industrial and laboratory installations. The use of high-quality materials ensures safety for the entire service life of the connected sanitary appliance – even in concealed applications.

View Complete Details

bathroom ceramics

Geberit& RAK Ceramics offers ceramic appliances for WCs, bidets, washbasins, urinals and shower trays through traditional, leading national brands. Many of these products have been developed in collaboration with internationally renowned designers and architects.  

View Complete Details

CERAMICS bathroom furniture

Most of the ceramic appliance ranges are complemented by a wide range of matching bathroom furniture made of moisture-resistant material and boasting high-quality surfaces. Innovative shower cabins and partitions along with bathtubs and shower trays made of various materials round off the product range.  

View Complete Details

Adjustable Water sprinklers

Adjustable sprinlers 40º-360º 8 nozzles and plastic cover Working pressure: 2, 1 – 3, 4 bar Range: 4, 6 – 13, 5m. Inlet: 1/2″ F & 3/4″F

View Complete Details

Electric Valves

Plastic electric valves (reinforced Nylon) specially suited for the turf irrigation; sizes from 3/4” to 2”; with flow control and available in 9 V lacht or 24 VAC. Compact design and ergonomic, user-friendly and easy maintenance. Fully opening and secure drip-tight closing.  

View Complete Details

controllers

Launching of a new range of controllers Opar branded and light line for any kind of application, from the simple tap controller to a complete wall controller.  

View Complete Details

Pp Compression Fittings

We offer two ranges of PP compression fittings: Performance Series and Standard Series. Both are made according to standards EN 712 / 713 / 715 / and ISO 3501 / 3503 / 3458 /3459, and are suitable for installation on PE pipes conforming to ISO 11922; DIN 8072 / 8074; and UNE 53131.   These fittings allow for a quick, simple insertion of the tube, considerably reducing installation time: simply loosen the nut (without removing it), and insert the pipe.

View Complete Details

Irrigation Fittings

Our philosophy of maintaining the highest standard in customer service is also reflected in our accessories products. We offer all the necessary accessories to complete your installation: clamp saddles, pipe clips, threaded fittings, hose couplings, SBE fittings, irrigation fittings, etc.

View Complete Details

Irrigation Valves

We offer a complete range of valves for the irrigation world, including hydraulic valves, angle seat valves (in several versions), and air release valves

View Complete Details

Check Valves

We design and manufacture an extensive family of check valves that can be used for a wide range of applications. These valves provide an exact and reliable control of fluids, and have been designed to offer maximum modularity and flexibility. Spring check and ball versions are available in PVC-U and Corzan CPVC. This standard supercedes BS 4514 : 1993 and BS 5255 : 1989. As with other Opar valve products, check valves are available in accordance with several dimensioning standards (Metric, BSP, ASTM, NPT,  

View Complete Details

BUTTERFLY VALVES STANDARD SERIES

We offer an extensive range of PVC butterfly valves ideally suited for flow control using minimal piping space. They are resistant to several chemicals and offer excellent flow characteristics. Available in accordance with several dimensioning standards (ISO/DIN, ANSI/ASTM, British Standard, JIS)

View Complete Details

Ball Valve

We offer a complete range of ball valves in PVC-U, featuring the “Antiblock” system which prevents ball jamming. Valves are 100% hydro tested prior to leaving the factory, and their reliability is further guaranteed by the world’s premier certification institutes. Ball valves are available in accordance with several dimensioning standards (Metric, BSP, ASTM, NPT, British Standard, JIS…) in order to meet the requirements of any market.

View Complete Details

FILTRATION MANUAL AND AUTOMATIC

The Opar filtration range is based on low maintenance and optimum safety in filtration. New TWISTER system which helps to a water saving and filter long life. Optimization of the performance and minimum frequency and intensity of maintenance labours.

View Complete Details

PE100 FITTINGS

Polyethylene (PE) is a thermoplastic that belongs to the group of polyolefines. Partially crystalline, it is an environmentally compatible product. In comparison to other thermoplastics, PE shows essential advantages which make it specially suitable for water and gas distribution applications, but can also be used in irrigation systems, industrial facilities or in building installations. Also described as third generation polyethylene types (or MRS 10), offers higher density and therefore improved mechanical properties to previous developments (PE 80 / PE63). The employed PE-material complies with the requirements of EN 12201 (plastic pipe systems for drinking water supply) and EN 1555 (plastic pipe systems for gas supply).

View Complete Details

Valve Boxes

Opar valve boxes enable the integration of valve assemblies or other elements into underground systems where easy access is required. These products are made of PP and designed to perform in even the most demanding environments. We have circular and rectangular valve boxes with snap-fit, twist-lock, and screw-on covers.  

View Complete Details

Pvc Pressure Fittings

As demonstrated by our product certifications (AENOR, AFNOR, Kiwa, etc.), We offer the highest-level guarantee for all its PVC Fittings for pressurized fluid handling applications. The extensive range of sizes and combinations we offer will accommodate any system design. The dimensions of our fittings comply with UNE-EN 1452-3, UNE-EN 1452-3, DIN 8063, and NF 54016/54029 standards, while many of our products meet other standards as well, including British, ASTM and Thai.  

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • OPAR UAE. Ltd.
  • Sharjah Industrial Area 13 P.O. Box: 30651, Sharjah, United Arab Emirates