Our Products #4993400

The Kingspan KoolDuct System of pre-insulated ductwork eliminates virtually all of the problems associated with galvanized sheet steel ductwork, fiber glass duct board and pre-insulated rigid polyiso (PIR) ducts. Benefits include: UL ListedLow weightFaster installation speedsHigh R-values with thin insulationSpace savingInstalled cost savingsLow air-leakageReduced energy usage & running costsEasily modified onsite to accommodate HVAC system configuration changesWhole life cost savingLower embodied energyReduced operational carbon dioxide (CO2) emissionsReduced workshopgenerated wasteNonfibrous rigid insulation coreZero-ODP & low GWPLEED points contribution

The Kooltherm K-range is an extensive range of premium performance rigid phenolic insulants for wall and floor insulation. Kooltherm offers the following benefits:With a thermal conductivity of 0.0190.023 Wm.K these are the most thermally efficient insulation products commonly used.The thinnest commonly used insulation products for any specific Uvalue.Rigid thermoset phenolic insulation core is Class 0, as defined by the Building Regulations in England, Wales & Ireland, and Low Risk, as defined by the Building Standards in Scotland.Rigid thermoset phenolic insulation core achieves the best possible rating of < 5% smoke obscuration when tested to BS 5111: Part 1: 1974.Manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP).Their closed cell structure resists both moisture and water vapour ingress a problem which can be associated with open cell materials such as mineral fibre and which can result in reduced thermal performance.Unaffected by air infiltration a problem that can be experienced with mineral fibre and which can reduce thermal performance.Safe and easy to install fibre-free core.If installed correctly, can provide reliable long term thermal performance over the lifetime of the building.

PalDuct "complete system technology" approach to pre-insulated ductwork is the solution to today's air distribution problems.Complete line of components and accessoriesProfessional hand tools and automatic machinerySpecialised training courses for duct manufacturers"Duct Design Software" to size the duct system and estimate the material neededTechnical Support

Kingspan PalDuct PIR panels comprise a fibre-free high performance rigid thermoset polyisocyanurate (PIR) insulation core, faced on both sides with an embossed aluminium foil. The aluminium foil is lacquered with corrosion resistant polymer varnish.

An extensive range of zero ODP high performance rigid urethane insulants for roofs and walls, offering the following benefits:With a thermal conductivity of 0.022-0.027 WmK these are amongst the more thermally efficient insulation products commonly usedEach product achieves the required fire performance for its intended applicationManufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)Their closed cell structure resists both moisture and water vapour ingress a problem which can be associated with open cell materials such as mineral fibre and which can result in reduced thermal performance.Unaffected by air infiltration a problem that can be experienced with mineral fibre and which can reduce thermal performance.Safe and easy to install fibre-free insulation core.If installed correctly, can provide reliable long term thermal performance over the lifetime of the building.

The Kingspan Styrozone range is an extensive range of high performance rigid extruded polystyrene insulants for roof, wall and floor applications. Rigid extruded polystyrene insulation offers the following benefits:Rigid extruded polystyrene insulation (XPS) has the necessary compressive strength to make it the product of choice for specialist applications such as heavy duty flooring, car park decks and inverted roofing.Each product achieves the required fire performance for its intended application.Manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP).Their closed cell structure resists both moisture and water vapour ingress a problem which can be associated with open cell materials such as mineral fibre and which can result in reduced thermal performance.Unaffected by air infiltration a problem that can be experienced with mineral fibre and which can reduce thermal performance.Safe and easy to install nonfibrous.If installed correctly, can provide reliable long term thermal performance over the lifetime of the building.The Styrozone N-Range has a Global Warming Potential (GWP) of less than 5 and zero Ozone Depletion Potential (ODP)

A complete set of professional hand tools and manual fabrication equipment has been specifically developed to enable the efficient and economical fabrication of ductwork. Ease of portability provides the option for site-based fabrication.

Kingspan OPTIM-R is an optimum performance next generation insulation solution from Kingspan Insulation. It comprises a rigid vacuum insulation panel with a microporous core which is evacuated, encased and sealed in a thin, gas-tight envelope, giving outstanding thermal conductivity, with the thinnest possible solution to insulation problems. With a declared (aged) thermal conductivity () of 0.007 WmK, Kingspan OPTIM-R provides an insulating performance that is up to five times better than other commonly available insulation materials. The high level of thermal efficiency with minimal thickness, achieved by Kingspan OPTIM-R, can provide solutions for applications where a lack of construction depth or space is an issue. For instance, in retrofit applications, Kingspan OPTIM-R can provide solutions for areas that previously would have remained un-insulated because there was insufficient space available. In new constructions Kingspan OPTIM-R can significantly enhance U-values in areas that would otherwise be accepted as denigrating the overall thermal performance. Contact us to discuss individual requirements.

We offer one of the widest ranges of rigid pre-insulated ductwork in the market. As such, our job is to support you with our knowledge and expertise of manufacturing, fabrication and installation of pre-insulated ductwork. One of these areas is automated fabrication.The CNC Machine (Computer Numerical Control) produced with the latest technologies for cutting straight and special parts (i.e. elbows, Y shapes, offsets, reducers) from insulation panels, used in the fabrication of pre-insulated HVAC ductwork.