Scaffoldings #200963

The highly flexible scaffold system PERI UP Flex leaves almost no request unfulfilled especially for industrial applications. This allows almost any adjustments to be made to suit local site conditions and also fulfills the highest requirements regarding occupational safety for the working areas to be realized. PERI UP Flex has a grid system of 25 cm and 50 cm. The wide range of ledgers and decks with different lengths starting from 25 cm allow decking to change direction during installation and therefore ensure maximum adaptability to suit project-specific geometries. PERI UP Flex meets the requirements of the European standards EN 12810 and EN 12811 As flexible as tubecoupler scaffoldingSafe working conditions Working platforms are completely covered without any gaps and simple conversions are made to accommodate any obstructions Non-slip The perforated surface of the decking provides a high level of safety Easy to install Quickly and safely mounted with the gravity lock and self-locking decks High load-bearing capacity Due to the special node rigidity and enormous loadability of the connectionAssembled with ledger in advanceIntegrated lock against liftingGravity Lock secures ledger immediately when inserted into RosettRectangular Rosett prevents rolling awayLoad classes associated deck length Width 75cm: 1 up to 4Width 100cm: 1 up to 6Width 125cm: 1 up to 4Steel deck 25x250 cm 5Steel deck 25x300 cm 4Handling Standard 2, 0 m: 10, 0 kgLedger 3, 0 m: 8, 7 kgSteel deck 25x250 cm: 15, 0 kgSteel deck 25x300 cm: 17, 8 kgAdjustment to the building Ledger-to-ledger and standard-to ledger connections allow the same flexibility as with tube and coupler scaffoldingAny kind of solution possible due to flexible grid dimensionsTransport Two ledgers can be carried in each handConnection Possibilities Metric grid dimensions every 25 cmhe flexibility of the PERI UP Flex scaffold allows a range of widths which are adapted to the respective requirements of the user. With few additional components such as console brackets or strengthened ledgers, complicated facade geometries can also be easily scaffolded. The modular working scaffold PERI UP Flex is suitable for all kinds of applications up to load class 6. It meets the requirements of the European standards EN 12810 and EN 12811 Brief descriptionWorking scaffold made of parts from Rosett modular scaffolding system for various widths with a non-slip steel decking directly mounted to ledgers! Safe and fast assemblyAssembled with guardrail in advance and Guardrail Coupler UPW or ledger in advance WeightmWidth 100cm: 17, 5 19, 0 kgm Assembly PerformanceAssembly: width 100cm: 7 - 10 m per man hourDismantling: width 100cm: 11 - 16 m per man hour

The PERI UP Flex Bracing Scaffold is ideal for daily site activities like reinforcing, shuttering and concreting. Work performance increases thanks to the high safety on the working areas. The Bracing Scaffold is available with a basic width of 150 cm or 250 cm and in versions of up to three fields lengthways. Large scaffold units can be moved by crane due to the tight connections. StableBallast and anchors are not required Simple to plan Fast determination of material requirements by means of prefabricated units Safe erectionThe advance guardrail guarantees safe erection Can be realised in large unitsThe Bracing Scaffold can be moved by crane with standard shaftsWorking scaffold up to load class 3 in line with EN 12811-1 (200 kgm)Maximum standing height: 10.80 mMaximum total length: 9 mScaffold widths: 75 cm and 100 cm

With PERI UP Rosett, complicated geometries can also be scaffolded cost-effectively, e.g. old buildings with bay windows and cantilevers. The Rosett nodes on the standards facilitate easy and safe assembly whilst the steel decks have a particularly high load-bearing capacity. The perfectly matched system and component dimensions allow any combination of frame scaffolding with modular scaffolding.The integrated protection against lifting provides access ways of equal height and without any obstacles. The requirements regarding working safety also remain fulfilled: the guardrail heights are according to the regulations and toe boards can be fitted from end to end. PERI UP Rosett meets the requirements of the European standards EN 12810 and EN 12811 and fulfills the requirements for protection scaffolds according to DIN 4420-1 (safety scaffolds and roof safety scaffolds for fall heights 2.0 m, protection fans)Working scaffolding made of parts from Rosett modular scaffold system with 72 an 104 cm widths, standard 24 m heights Safe and fast assembly Assembled with guardrail in advance and Guardrail Coupler UPW or ledger in advanceIntegrated lock against liftingGravity Lock secures ledger immediately when assembledRectangular shaped Rosett prevents rolling awayLoad classes associated deck length Width 72 cm: 1 up to 4Width 104 cm: 1 up to 6Steel deck 32x250 cm 6Steel deck 32x300 cm 5Handling Standard 2, 0 m: 10, 0 kgLedger 3, 0 m: 8, 7 kgSteel deck 32x250cm: 17, 0 kgSteel deck 32x300cm: 19, 9 kgAssembly using guardrail in advance: standard + guardrail: 13.1 kgConnection Possibilities Metric grid dimensions every 25 cmNodes every 50 cm12 connections for ledgers and diagonals

The PERI UP Rosett R scaffold system is the modular reinforcement scaffold for efficient work. A reinforcement scaffolding is a special type of facade scaffolding. It is characterized by the fact that no anchors are required. The units are stable without the use of ballast and can thus be moved without the need of any assembly work. Erection instructions are available for the reinforcement scaffolding and contain all safety-relevant guidelines as well as lifting instructions. The different heights required in the course of formwork planning are taken into consideration during the configuration of the scaffold units. Stable Without anchors without ballast in front of formwork and walls Planned in advance Fast calculation of material requirements thanks to the modular design principle Quick and efficient Complete units can be moved by crane due to the extremely tight connections.Used as working scaffold in Scaffold Groups 1-3 according to DIN 4420-1 or Load Classes 1-3 according to EN 12811-1 (0.75 2.00 kNm)Fullfills wind load requirements according to DIN EN 1004 and DIN EN 12811System widths 72 cm and 104 cmBase width 150 cm or 250 cmMaximum standing height 6.60 m (with base width 150 cm) or 10.80 m (base width 250 cm)Crane-moveable units through extremely tight connections

With T-frames, facade scaffolding can be assembled quickly and safely by means of the guardrail in advance and self-securing steel decks. The PERI UP T 72 T 104 frame scaffold fulfills all scaffolding tasks which can be technically and cost-effectively realized with frame scaffolding. In addition, the system provides the user with an extraordinarily high level of safety which makes the harness protection required in many countries unnecessary. The guardrail in advance for the next level is assembled together with the T-frame from the lower, already secured scaffolding level. The scaffolder is therefore in a safe position when entering the next level. This is the basis for fast and safe working procedures. The high load-bearing capacity of the PERI UP T 72 T 104 frame scaffold allows large bay sizes for all scaffold groups and the work to be carried out. The standard anchor arrangement for PERI UP follows an 8 m offset pattern. Only PERI UP has received official approval to extend this pattern to the edges of the scaffolding. The high frame stability and load capacity of the T-Frame UVT allows many different variations: inside console brackets on every level, additional outside console brackets, protection roofs, nets and tarpaulins.standard application: up to 24m heightproof available for heights up to approx. 90mFast and safe assembly With guard rail in advance together with T-Frame, no additional components are requiredIntegrated lock against liftingIntegrated Fixings for inner guard railLoad classesassociated deck length Width 72cm: LK1-LK4Width 104cm: LK1-LK6Steel Deck 32x250cm: