Post Your Requirement Menu

Welcome User

Other Products / Services

Leading Manufacturer, Supplier & Retailer of PCB EXPOSURE UNIT, desoldering pump, Hot Air Rework Station, Power Supply and EDUCATIONAL FIBRE SPEED OF LIGHT KIT.

PCB EXPOSURE UNIT

Independently switched upper & lower light tubes for exposure of single/double sided PCB's Built-in vacuum pump allowing the user to freeze the PCB's in place for perfect alignment to artwork An adjustable timer & counter for setting exposure time. - 110V/200Woperation A convenient "re-expose" button for repeat settings when doing multiple PCB's. 6 each 15 watt UV lamps (3 upper/3 lower) - Exposure area: 16" x 9.5" Manufacturer:   Kinsten Electronics Taiwan   The Kinsten UV Exposure Box has a maximum exposure area 230 x 380mm and can be used for single sided, or double sided PCB's. It includes digital timer & vacuum table. Three (3) FL-15 tubes top and bottom, ensure high intensity ultra-violet radiation for rapid exposure time. For applications that require more intense UV, Kinsten now offer the KVB30DQ with four (4) lamps per side for 220V regions and KVB30DT with five (5) lamps per side for 110V regions. Due to the size of the ballasts, 240V regions do not yet have a high intensity model. The dominant UV wavelength is 350~400nm and the KVB-30D, while designed for use with Kinsten presensitised PCB, is often suitable for other applications that require transfering an image to a UV sensitive surface. They have been used in other applications including label making and rubber stamp production, although please check suitability first.   Independently switched upper & lower light tubes for exposure of single/double sided PCB's Built-in vacuum pump allowing the user to freeze the PCB's in place for perfect alignment to artwork An adjustable timer & counter for setting exposure time. - 110V/200Woperation A convenient "re-expose" button for repeat settings when doing multiple PCB's. 6 each 15 watt UV lamps (3 upper/3 lower) - Exposure area: 16" x 9.5" Technical Details   Part Number KVB-30D Item Weight 38 pounds Product Dimensions 20.1 x 16.1 x 5.9 inches Item model number KVB-30D Size full size Color black

View Complete Details

desoldering pump

8PK-366D : Desoldering Pump Manufacturer part number:  8PK-366D Manufacturer:   Proskit   Features   Specifications     Material Suction capability OAL (mm) Individual packing Aluminum 30cm-Hg 163 Blister card

View Complete Details

Hot Air Rework Station

SS-989B SMD Hot Air Rework Station 2 In 1 SMD Hot Air Rework Station AC220~240V 700W Manufacturer part number:  SS-989B Manufacturer:   Proskit   Description 2X Lifetime than traditional heater Heat Fast , 36sec 300 oC By Alumina Ceramic heating element Smart Microprocessor Accurate temperature controlled Auto Cooling System Prolongs the service life Features • 2 In 1 rework station to save cost • Closed circuit sensor design • High power, quick warm up times • Individual function start saves energy • LED digital display • Quiet operation & ESD safe design • Auto cool-off process to prolong the life of heating element • Interchangeable and applicable to most of branded hot air nozzles and tips • Silicone Handpiece Cord Wire heat-resistant up to 200oC • AWG 20 (0.5mm2) UL Certified Wires • Soldering iron heater made by Alumina Ceramic

View Complete Details

Power Supply

PE-213802 Power Supply Manufacturer part number:  PE-213802 Manufacturer:   Popular Electronics   DC REGULATED POWER SUPPLY INPUT: AC 230V, OUTPUT: 13.8VDC,   2A.

View Complete Details

EDUCATIONAL FIBRE SPEED OF LIGHT KIT

To conduct the speed of light experiment, first apply 110 VAC power to the oscilloscope and Speed of Light Apparatus, then connect oscilloscope probes to apparatus test points. After calibration, the oscilloscope monitors the reference and delayed pulses, the time delay is measured and the speed of light calculated. Manufacturer:   CIRCUIT SPECIALIST, INC Do-it-yourself assembly kit for measuring the speed of light with fiber optics With Industrial Fiber Optics'  Speed of Light Apparatus , measuring the speed of light is now easy and quite accurate. Such was not the case for many centuries. The famed Galileo, after he attempted to measure the speed of light with an unlikely arrangement of lanterns and flags on tall towers, decided that light must travel at infinite speed. Later, Armande Fizeau used an elaborate mechanism with mirrors, lens and a huge rotating cogwheel to determine if the speed of light was, in fact, not infinite. He got close. After many years we now know light does not travel at infinite speed, but rather 299, 792.4562 meters per second in a vacuum. With the proper combination of electronics, electro-optics and fiber optics this once-difficult measurement is simple and can be conducted in any lab or classroom. All that's needed is a 60 x 100cm table, 110 VAC electrical power, oscilloscope and the  Speed of Light Apparatus .  NOTE:   This kit needs assembly before conduction experiments. Easy-to-follow assembly instructions are included with the kit. Some experience with using an oscilloscope and soldering is suggested for completion. To conduct the speed of light experiment, first apply 110 VAC power to the oscilloscope and  Speed of Light Apparatus , then connect oscilloscope probes to apparatus test points. After calibration, the oscilloscope monitors the reference and delayed pulses, the time delay is measured and the speed of light calculated. An integral part of the  Speed of Light Apparatus  is an easily understood full-color, often lighthearted manual. It begins by tracing the early steps of technical pioneers in their quest to understand light. The manual also includes detailed step-by-step set-up and measurement instructions and examples with equations for calculating the speed of light. Features: All solid-state transmitter/receiver design Low-voltage electronics operation Fiber optic delay requires no opitcal alignment Safe, visible LED light source Quick set-up and measurement Impact-resistant, protective enclosure Rubber feet on chassis bottom for adhesion on smooth surfaces Contained light beam is ideal for small areas 28-page full-color manual with step-by-step assembly, operation instructions and sample oscilloscope displays The apparatus consists of an electronics circuit board in protective plastic enclosure; two fiber optic cables; test connections for all outputs and a 110 VAC-to-DC power adapter.

View Complete Details

CONNECTORS AND ADAPTORS

CVP1707D: F JACK, CHASSIS MONUT Manufacturer:   Countryman Enterprise Co Ltd

View Complete Details

arduino boards

Technical specs Microcontroller ATmega2560 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limit) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 20 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz LED_BUILTIN 13 Length 101.52 mm Width 53.3 mm Weight 37 g

View Complete Details

pcb cutter

DM 525 25” Shear Two bench top shears suitable for cutting printed circuit board laminates, thin metal sheet and aluminium (1.5/2.0mm) or plastic labels / front panel materials. On lowering the operating handle, a spring loaded clamp is activated which holds the material securely during cutting, thus enabling cuts to be made with a mini-mum of effort. These shears are composed of an epoxy powder coated cast aluminium frame fitted with hardened and ground steel blades. Manufacturer:   MEGA Electronics Two bench top shears suitable for cutting printed circuit board laminates, thin metal sheet and aluminium (1.5/2.0mm) or plastic labels / front panel materials. On lowering the operating handle, a spring loaded clamp is activated which holds the material securely during cutting, thus enabling cuts to be made with a mini-mum of effort. These shears are composed of an epoxy powder coated cast aluminium frame fitted with hardened and ground steel blades.

View Complete Details

SINGLE CORE EQUIPMENT WIRE

PE-0300: BLACK Manufacturer:   Popular Electronics 1/0.60mmTinned +PVC 0.D 1.25mm

View Complete Details

ELENCO KITS TELEPHONE KIT

Telephone Kit The PT-323K / AK-700 is a push button electronic telephone. It is equipped with the following features: Pulse/tone dialing; automatic redial; a ringer turn off switch; 4 neon bulbs for visual indication of telephone ringing; clear see-through case to show the total inner workings of the phone. Sectionalized construction and testing makes assembly easy. Wall mounting cradle included. easy. Wall mounting cradle included. This kit requires soldering. For ages 12 and up. WARNING CHOKING HAZARD- Small parts Not for Children under 3 yrs

View Complete Details

Microphone Cable

32/0.10mm bare copper +PVC I.D 1.4mm x 2C (Red and Black) +Cotton fill + 86/0.10mm spiral +Black PVC O.D 6.1mm (100 M PER REEL)

View Complete Details

DIGITAL VIDEO CABLE

PE-1063: DIGITAL VIDEO CABLE Manufacturer:   Popular Electronics 1/0.63mm bare copper+foam PE I.D 2.9mm+Double sided Aluminium foil +112/0, 12mm Tinned Braid+light Blue PVC Jacket O.D 4.65-4.70mm (100M per Reel)

View Complete Details

PVC INSULATION AUTO CABLES

PE-0115: GREEN Manufacturer:   Popular Electronics   (44/0.30mm) 0.D. 3.5MM.

View Complete Details

COLD FREEZING SPRAY

A-44-200: COLD FREEZING SPRAY 200ml Manufacturer:   DUE-CI   Low Global Warming Potential and non-flammable aerosol, specially developed to locate short circuits and failures in electronic components and to test the trace continuity in PC-boards, or to cool the entire circuit. Provide heat sink protection for heat sensitive components during desoldering and soldering. Quickly cools down temperature to -50°C. Dielectric and non flammable. Safe for use on most materials. Evaporates totally, without leaving any residue.  LOW GLOBAL WARMING POTENTIAL (GWP) 100% NON FLAMMABLE OZONE SAFE CFC, HCFC AND HFC FREE SAFE FOR MOST MATERIALS 100% ACTIVE PRODUCT

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Popular Electronics ( Administrative Office)
  • Store 1, M floor, Italia Kitchen showroom, Al Khabeesi Building, Near Abu Baker al Siddique Metro Station, Salahudeen Road, Deira, P.O.Box-10774, Dubai, United Arab Emirates