Our Products
Av Cable
2 Products availableSoldering Equipment
1 Products availableElectric Circuit Components & Parts
1 Products availablePower Connectors
1 Products availableIndustrial Wires
1 Products availableWires
1 Products availablePrinting Machines & Equipment
1 Products availableElectric Cutting Tools
1 Products availablePuzzles & Educational Games
1 Products availableSoldering Machines & Accessories
1 Products availableOur product range contains a wide range of Power Supply, ELENCO KITS TELEPHONE KIT and COLD FREEZING SPRAY
The Kinsten UV Exposure Box has a maximum exposure area 230 x 380mm and can be used for single sided, or double sided PCB's.
It includes digital timer & vacuum table.
Three (3) FL-15 tubes top and bottom, ensure high intensity ultra-violet radiation for rapid exposure time. For applications that require more intense UV, Kinsten now offer the KVB30DQ with four (4) lamps per side for 220V regions and KVB30DT with five (5) lamps per side for 110V regions. Due to the size of the ballasts, 240V regions do not yet have a high intensity model.
The dominant UV wavelength is 350400nm and the KVB-30D, while designed for use with Kinsten presensitised PCB, is often suitable for other applications that require transfering an image to a UV sensitive surface. They have been used in other applications including label making and rubber stamp production, although please check suitability first.
KVB-30D |
38 pounds |
20.1 x 16.1 x 5.9 inches |
KVB-30D |
full size |
black |
DC REGULATED POWER SUPPLY | |
INPUT: AC 230V, OUTPUT: 13.8VDC, 2A. |
Do-it-yourself assembly kit for measuring the speed of light with fiber optics
With Industrial Fiber Optics'Speed of Light Apparatus, measuring the speed of light is now easy and quite accurate. Such was not the case for many centuries. The famed Galileo, after he attempted to measure the speed of light with an unlikely arrangement of lanterns and flags on tall towers, decided that light must travel at infinite speed. Later, Armande Fizeau used an elaborate mechanism with mirrors, lens and a huge rotating cogwheel to determine if the speed of light was, in fact, not infinite. He got close. After many years we now know light does not travel at infinite speed, but rather 299, 792.4562 meters per second in a vacuum.
With the proper combination of electronics, electro-optics and fiber optics this once-difficult measurement is simple and can be conducted in any lab or classroom. All that's needed is a 60 x 100cm table, 110 VAC electrical power, oscilloscope and theSpeed of Light Apparatus.
NOTE:This kit needs assembly before conduction experiments. Easy-to-follow assembly instructions are included with the kit. Some experience with using an oscilloscope and soldering is suggested for completion.
To conduct the speed of light experiment, first apply 110 VAC power to the oscilloscope andSpeed of Light Apparatus, then connect oscilloscope probes to apparatus test points. After calibration, the oscilloscope monitors the reference and delayed pulses, the time delay is measured and the speed of light calculated.
An integral part of theSpeed of Light Apparatusis an easily understood full-color, often lighthearted manual. It begins by tracing the early steps of technical pioneers in their quest to understand light. The manual also includes detailed step-by-step set-up and measurement instructions and examples with equations for calculating the speed of light.
The apparatus consists of an electronics circuit board in protective plastic enclosure; two fiber optic cables; test connections for all outputs and a 110 VAC-to-DC power adapter.
Microcontroller | ATmega2560 |
Operating Voltage | 5V |
Input Voltage (recommended) | 7-12V |
Input Voltage (limit) | 6-20V |
Digital I/O Pins | 54 (of which 15 provide PWM output) |
Analog Input Pins | 16 |
DC Current per I/O Pin | 20 mA |
DC Current for 3.3V Pin | 50 mA |
Flash Memory | 256 KB of which 8 KB used by bootloader |
SRAM | 8 KB |
EEPROM | 4 KB |
Clock Speed | 16 MHz |
LED_BUILTIN | 13 |
Length | 101.52 mm |
Width | 53.3 mm |
Weight | 37 g |
Features
Specifications
Material | Suction capability | OAL (mm) | Individual packing |
Aluminum | 30cm-Hg | 163 | Blister card |
2X Lifetime than traditional heater
Heat Fast , 36sec 300 oC By Alumina Ceramic heating element
Smart Microprocessor Accurate temperature controlled
Auto Cooling System Prolongs the service life
2 In 1 rework station to save cost
Closed circuit sensor design
High power, quick warm up times
Individual function start saves energy
LED digital display
Quiet operation & ESD safe design
Auto cool-off process to prolong the life of heating element
Interchangeable and applicable to most of branded hot air nozzles and tips
Silicone Handpiece Cord Wire heat-resistant up to 200oC
AWG 20 (0.5mm2) UL Certified Wires
Soldering iron heater made by Alumina Ceramic
1/0.60mmTinned
+PVC 0.D 1.25mm
Telephone Kit
For ages 12 and up.
WARNING CHOKING HAZARD- Small parts Not for Children under 3 yrs
32/0.10mm bare copper
+PVC I.D 1.4mm x 2C (Red and Black)
+Cotton fill + 86/0.10mm spiral
+Black PVC O.D 6.1mm
(100 M PER REEL)
1/0.63mm bare copper+foam PE I.D
2.9mm+Double sided Aluminium foil
+112/0, 12mm Tinned Braid+light Blue
PVC Jacket O.D 4.65-4.70mm
(100M per Reel)
Low Global Warming Potential and non-flammableaerosol, specially developed to locate short circuits and failures in electronic components and to test the trace continuity in PC-boards, or to cool the entire circuit.Provide heat sink protection for heat sensitive components during desoldering and soldering.Quickly cools down temperature to -50C.Dielectric and non flammable.Safe for use on most materials.Evaporates totally, without leaving any residue.