Remel International (fze)

Sharjah, United Arab Emirates

we provide high quality modified, cutback and other types of bitumen. That is in huge demands in the national and international markets. Bitumen, offered by us, is available in all grades such as 40/50, 60/70 and 85/100.

bitumen:

bitumen is produced from selected crude oils through a process of fractional distillation. The crude oil is heated to temperatures of between 300 and 350 degrees celsius and fed into a distillation column allowing the lightest fractions of the crude to separate, through vaporization, from the heavier fractions, which remain liquid.

the higher boiling point fractions are then drawn - off via a heat exchanger and enter a vacuum distillation column. This process produces a "short residue" that is used to manufacture several grades of bitumen. the pressure and temperature conditions within the vacuum process will determine the hardness of the short residue, and as such the grade of bitumen produced. The short residue may be further modified by 'air blowing' in which air is passed through the residue at temperatures of 250 - 300 degrees celsius.

the above are the typical penetration or paving grades of bitumen. Additional processing provides other grades of bitumen products such as:

oxidized bitumens :

produced by more vigorous air blowing; they are more 'rubber like' and less temperature susceptible than the paving grades.

hard grade bitumens :harder paving grades.

cutback bitumens :blends of penetration bitumens with solvent such as kerosene.

emulsions :stabilized suspensions of bitumen in water.

polymer modified bitumens :mixtures of selected bitumens with polymers such as thermoplastics or elastomers.

features:

100% pure and qualitative, excellent physical stability, no exudation when comes in contact with highly absorptive materials, resistant against atmospheric conditions, anti corrosive & it is widely use in road construction

we offer different grades of bitumen that is the best quality penetration grade asphalt used for construction applications. Derived from crude petroleum refining, this bitumen 40/50 is dark in color with waterproofing, adhesive, non-volatile and softens gradually when heated properties.

uses :

• a mineral binder that is aggregated in asphalt concrete and hot laid plant for constructing parking areas, highways, curbs, airports and driveways.
  

• it uses in grass growing, bitumen emulsion is a very convenient medium for covering the seed bed with a layer that assists the

  germination of grass seed in the following ways:

  (a) the bitumen layer prevents evaporation of water from the surface and keeps the soil moist.

  (b) the black bitumen layer absorbs heat during the day and gives it up slowly each night, creating temperature conditions that encourage germination.

  (c) the seed bed is less likely to become waterlogged, blown or washed away, or eaten by birds.
  

• bitumen is also used in themanufacture of printing ink and rubber. When added with oil, bitumen improves the wetting of fillers and pigments, this is something that is usually achieved by adding other oils.
  

• bitumen is also used to buildairfield runways. Its unique waterproofing attributes are responsible for it being used in canal lining, dam construction and river bank protection.
  

• bitumen waterproofinggives the user many advantages. Easy and inexpensive to use, bitumen waterproofing products are quick drying and can be easily brushed, sprayed or trowel on the area you want protected whether that be on the roof or in the swimming pool.

packing: in bulk, and in drums.

quality policy:we are committed to provide quality products and services .

analysis :to see the desired product specification / analysis

Rubber Process Oil:

Rubber Process Oil are rich aromatic by products from solvent extracting process to modify physical properties of the vulcanization and to reduce the cost of the finished product.

Features & Uses :

As component in rubber formulations and manufacturing of products such as automobile tiers, rubber shock absorbers, footwear, industrial hoses, wire and cable coverings, flooring materials and carrier fluid or solvent in manufacture of adhesives, sealants, polishes and carbon black

• To improve physical properties of vulcanization to reduce the cost of finished rubber compounds

• Tyre, Rubber and Dhoop Industry.

• Used as a Lubricant in Rubber Processing.

• Used in manufacturing of White Oil.

• Used as a component in Ink Production.

Advantages :

• Low Staining

• Low Volatility

• Low Solubility Propertiesl

• Elastomer compatibility

Packing: In Bulk, And In Drums.

Quality Policy:We Are Committed To Provide Quality Products And Services .

Analysis :To See The Desired Product Specification / Analysis

Fuel Oil:

Fuel oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking, fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 C (104F) and oils burned in cotton or wool-wick burners. In this sense, diesel is a type of fuel oil. Fuel oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, heavier than gasoline and naphtha.

Characteristics Of Fuel Oils:

Characteristics that determine grade classification and suitability for given applications are:

Viscosity

Flash Point

Pour Point

Water And Sediment Content

Carbon Residue

Ash

Distillation Qualities Or Distillation Temperature Ranges

Specific Gravity

Sulfur Content

Heating Value

Carbon-Hydrogen Content

Packing: In Bulk, Flexi Bags And In Drums.

Quality Policy:We Are Committed To Provide Quality Products And Services .

Analysis :To See The Desired Product Specification / Analysis

Residue Wax:

It is a mix of oil and slack wax.

PrimaryUses & Applications :

Residue Wax supplied by us is extracted from premium quality raw material. It comprises of mixture of oil and slack wax. Residue Wax is primarily used as waterproofing agents in the manufacture of various industrial products.

Rubber Industries

Plastic Industries

Match Box Industries

Polish Industries

Many More .

Packing: In Bulk, Flexi Bags And In Drums.

Quality Policy:We Are Committed To Provide Quality Products And Services .

Analysis :To See The Desired Product Specification / Analysis