Sabmatic Trading LLC

dubai, United Arab Emirates

Automatic Rescue Device for Elevators
Applicable for all kind of elevators with Permanent Magnet Synchronous Motor (PMSM) and Induction Motor.

• Model: ARD 15 & ARD 25 & ARD 39 & ARD 45
• Motor Capacity: 15HP/11KW & 25HP/18.5KW
• Input DC Voltage: 60VDC
• Input AC Voltage: 220V AC
• Output Inverter Voltage: 400V Three Phase 50Hz Pure Sine wave
• Output Current: 6Amps / 10Amps

Emergency Lift Operating System

A static Converter designed to generate 3 phase output to support the Lifts / Elevators during utility failure. In addition to this, important load like staircase, parking, compound & common lights, security systems, water pump, fire pump etc. can be supported through this innovative product.Emergency Lift Operating System offers comprehensive solutions to the most critical application & incorporates an array of outstanding user friendly features keeping in mind the day to day needs and long term technical and commercial viabilities.The charger is a controlled rectifier that provides constant voltage & constant current to charge the battery bank whenever the utility supply is available.

key feature

• Fully automation operation
• Low capital cost per KVA
• No extra accessories cost
• Battery power utilized only when the load is applied
• Noiseless
• Environment friendly
• Very low operating cost
• Low maintenance cost
• Can be installed in a small foot print area
• Operational cost fix during the battery life span
• No fuel storage license required
• Built-in protection like overload, short circuit, over voltage, regulated voltage & frequency
• Built-in emergency landing facility
• Data logging for back up duration & operation
• Electromechanical switch internal for single lift and external for the multiple lifts
• Static switch optional
• Maximum size of Lift 20 persons/20HP

VVVF Variable Voltage Variable Frequency
AC Motor Drive (TDS-V8 SERIES)

• Sensorless Vector control with auto tuning system
• Standard LED operator
• Communication function: RS-485 installed (MODBUS) protocol.
• Frequency control ranges from 0.1 Hz to 400Hz with resolution of 0.01 Hz.
• Two set of anological output interface. Each provides 11 individual analogical signals setting.
• PID Control, Simple PLC function, Energy saving, Multiple Frequency Pulse Output.
• Auto torque boost, slip compensation.

key feature

• Main power voltage:380440VAC
• Assistance voltage:220V A
• Start way:dry contact point
• Work frequency:5060Hz 5%
• Maximum peak voltage:600V or 1200V1600V
• Start time (speed time):140 sec.
• Start torque:100%500%

Elevator Soft-Start

• Sensorless Vector control with auto tuning system
• Standard LED operator
• Communication function: RS-485 installed (MODBUS) protocol.
• Frequency control ranges from 0.1 Hz to 400Hz with resolution of 0.01 Hz.
• Two set of anological output interface. Each provides 11 individual analogical signals setting.
• PID Control, Simple PLC function, Energy saving, Multiple Frequency Pulse Output.
• Auto torque boost, slip compensation.

SVC 1 Phase500VA-30000VA
SVC Single-phase high accuracy full automatic AC voltage stabilizers

• Input Voltage: 160-250V
• Frequency: 50-60Hz
• Delay: Short delay 3-7 sec long Delay 3-7min
• Output current: 2A 4A 6.5A 8A 12A 20A 40A 60A 80A 120A
• Temperature rise:

SBW/SBW-F 3-Phase30KVA-1500KVA
SBW Series full automatic compensated voltage stabilizers

• Input Voltage: 38030%
• Wave form Distortion: No additional waveform distortion
• Overload Capacity: 200% for 1 minute
• Output Voltage: 3802%
• Efficiency: 98%
• Response speed: 1 sec
• Protective function: Protections against over voltage, over current, phase shortage and phase-sequence

JJW
JJW Series Precision purifying single-phase AC stabilizer

• Input Voltage: 160-260V
• Responce time: 50ms
• Output Voltage: 220V0.5%
• Efficiency: 92%
• Peak absorption: Input 3000V/3s peak output 30V

JSW
JSW Series Precision purifying 3-phase AC stabilizer

• Input voltage: 280-480V
• Frequency: 50HZ5%
• Output Voltage: 380V1%
• Response time: 50ms
• Efficiency: 92%
• Peak absorption: Input 3000V/3s peak output 30V

AGM Sealed Lead Acid Batteries

• Negative Terminal Position
• Type of Terminal, N: Nut
• Wired Lead Type with Connector
• Inner Terminal Position
• Handle Type
• Light Version
• Long Life Type
• Super High Rate Type

Stavolt Energy SG2-200-300 AH

Stavolt Energy Battery is a Switzerland Company established in 1987 and is concentrating in theindustrial battery business. Stavolt SG Series is 2V Gel technology battery. This range offers 100%capacity and is capable of deep discharge. Horizontal and vertical installation is applicable in SG Series.

• 99% efficiency
• GEL technology is applied
• 15+ years floating service life

• BS6290 part 4
• Efficiency at Full Load: 95.0
• Telcordia SR 4228
• Eurobat guide
• IEC60896-21/22
• UL

Universal Elevator Controller

• Compatible to all elevator brands in the market
• Auto door & swing door functioning with Hydraulic 2 speed, single speed & VVVF drive.
• Allows all types of floor indication facility
• Allows both floor positioning technique (counting type separate type)
• Allows operation in full collective selective and down collective mode
• Can be installed conventionally or based on serial communication
• 16 x 2 character alpha numeric LCD display that shows floor no. call no. status, Error messages continuously
• Programmable various timers, parameters using in built key pad (on-side)
• Password protected system
• Since a day of installation, controller keeps history of usage of lift floor wise
• We can shutdown lift by predefined time which is password protected
• 4 level of safety standard.

Its a device guarantees the return of the cabinet to the nearest floor & reopening the door in rope lift system, in the event of main power failure. Also in case of power problem with the lift itself, it can be installed with any type of control panel it functions with sealed lead acid batteries and does not require any maintenance.
The ELD device comes into operation a few seconds after main power failure occurs. If the lift is a floor, ELD simply open the cabinet door. If the lift is blocked between two floors ELD turns in the direction that requires the least expenditures of current and brings the car to the floor level. At this point door reopening is commanded. When this operation has been completed, ELD cuts out automatically.

key feature

• A complete backup solution for rope lift system
• LCD or LED controlled supervision (REV-6)
• Smart real time sensor for direction control
• Multi-LED board indicator for easy maintenance low battery protection system
• Isolated outputs for board security
• Reverse polarity protection
• Overload management system for heavy loads
• Completely micro processed (response time