Our Products
1. REDUCED HEIGHT DOWNLIGHT LUMINARIES embed in false ceilings, allowing high luminescence as well as a carefully studied glare control
This is for 2xE27 CFL lamp upto 26W. The reflector is injected polycarbonate (PC) with aluminium metalised treatment, and is scratch resistant
Body : Electro-zinc plated
Available color : white, Gold, Chrome
Degree of protection : IP 20
2. METAL HALIDE DOWNLIGHT LUMINARIES embed in false ceilings, allowings, high luminescence as well as great visual confort. This is for sodium vapour and metahalide lamp from 70 to 150W.
The reflector is injected polycarbonate (PC) with aluminium metalised treatment, and is scratch resistant.
Body : Electro-zinc plated
Available color : White, Gold, Chrome
Degree of Protection : IP 20
Holders available for : MX 70/150W, 1 x E 27 and 2 x E 27
Material Spacification White polycarbonate (PC) housing and diffuser impact resistant polycarbonate (PC) textured Accessories | |
Applications |
Nylon screw terminal for single cable 0.5-1.5mm2
Insulatioin Class F
Vaccum-pressure white thermo setting epoxy lacquer impregnated with good radiation.
Ta : 40C
INPUT : 220- - 240V
OUTPUT : 12V, 50V
Features Light weight with smart design. | |
Ballast : Vaccum pressure impregnated type. | |
Applications Suitable for lighting applications in humid, dusty, corrosive areas like, conveyor belts, galleries of industrial plants and factories, kitchen, shower rooms, laundries, catering establishments, car parks, outdoor areas etc |
Specification
Diffuser | : | Clear Prismatic |
Housing | : | Steel white epoxy powder coated |
Ballast | : | Vaccum pressure impregnated type |
lamp/Starter holder | : | Push fit type, body made of heat resistant polycarbonate (PC) |
Starter | : | Glow type starter |
Internal wiring | : | PVC insulated, heat resistant, solid conductor |
Mounting System | : | Surface mounting |
Maintenance | : | Easy maintenance by removal of prismatic diffuser |
Degree of protection | ; | IP 20 |
UV stabilised clear prismatic diffuser ensures maximum light transmission. The well designed prisms results in controlled uniform diffusion of light. Also this attractively styled prismatic diffuser has brilliant lighting effect with high efficiency.
Applications
These fittings are used in situations where there is requirenment for glare free, soft and diffused lightings.
These fittings are general purpose luminaries, suitable for use in offices, banks, schools, hospitals, shopping complexes, sales & leisure areas, lobbies etc.
Fluorescent tubes are low pressure mercury discharge lamps, in which light is produced predominently through fluorescent powder activated by the discharge of ultra violet energy.
The lamp, generally with a tubular-shaped glass bulb and a sealed electrode for each terminal, contains low preassure mercury vapour and a small amount of inert gas for ignition and arc regulation.
The glass bulb inner surface is covered by a luminescent (fluorescent powder of phosphorous) whose composition determines the amount of emitted light and the lamp color temperature.
The lamp requires an auxillary equipment formed by a Ballast and starter as well as trimmer to improve the power factor.
Charecteristics :
Average rated life : 10, 000 hrs.
Color temperature : 3, 000 - 6, 400
Color rendering index (RI) : 50-98
Key Specification :
Watt : 10W/15W/18W/36W/58W
Lamp Type : T8
Applications :
For general lighting. Recommended for offices, factories, hospitals, shopping malls, residences etc.
Application All commercial and industrial environments. | |
Specification Die-cast aluminium base and grill with opel glass | |
SB 4007 A bulkhead light suitable for a variety of uses. Manufactured from polycarbonate (PC) material. | |
Application All commercial and industrial environments |
Material Specifications Chassic is used with newly designed inclined basis, white epoxy powder coated, which can match various types and structures of celling frames | |
Acceessories Ballast : Vaccum pressure impregnated type. | |
Other Features: Cable Entry: Through 19mm knock-out Applications: These luminaries is used for all economical energy saving lighting installation for medium visual requirements such as offices, sales and display areas, also for banking and counter halls, hotels, restaurants and living rooms Optical System: This range is for basic applications where a cost effective installation is of paramount concern and the angle of cut off is of less interest. The range offers higher luminous efficiency from spectacular aluminium reflectors and therefore offers increased lighting level. louvers offer the best overall performance with respect to efficiency and illumination control. |
Material Specifications Chassis is used with newly designed inclined basis, white epoxy powder coated, which can match various types and structures of ceiling frames. | |
Accessories Ballast : Vaccum pressure impregnated type. | |
Other features Cable Entry: Through 19 mm knock-out | |
Applications These luminaries is are used in situations where the requirement of light is glare-free soft and diffused. These fittings will meet most of the lighting requirements in offices, banks, schools, hospitals, shopping complexes, sales counters, lobbies etc. |
Features Architectural stylish appearance Ballast :Vaccum pressure impregnated type Lamp Holder :Porcelain Ignator :Super imposed pulse ignator, fully encapsulated vibration resistant. Iinternalwiring :PVC Insulated, heat resistant wire Terminal Connector :3way 6 Amp Degree of Protection :IP65 | |
Applications SMH 70/150/250/400 |