Selex Electricals L.l.c

United Arab Emirates

Material Spacification

White polycarbonate (PC) housing and diffuser impact resistant polycarbonate (PC) textured

Accessories
Lamp Holder : Push fit type, made of heat resistant polycarbonate (PC)Terminal Connector : 3Way, 6 AmpInternal Wiring : PVC insulated, head resistant, solid conductor wireBattery : High tempered, Ni-Cd rechargable, with 3 hours duration, overcharge and discharge protectionElectronic circuit BoardOptions : Maintained, Non-Maintaineddifferent type of stickers available for exit signs

Applications
Homes, banks, schools, offices, conference halls, corridors and similar other applications where emergency/escape lighting is necessary in the event of power supply failure.

Common Features

High quality aluminium material and static powder coated finishReflector : Fabricated steel sheet, white epoxy powder coated conforms to IEC International safety standardLow noise, free flickering and durable magnetic ballastEasy instllationDegree of protection : IP20

Accessories

Ballast : Vaccum pressure impregnated type.Lamp Holder : Push fit type, made of heat resistant polycarbonate (PC) and extremely heat resistantStarter Holder : Push fit type, made of heat resistant polycarbonate (PC)Starter : Glow type starterInternal wiring : PVC insulated, heat resistant and solid conductorTerminal Connector : 3 way 6 amp

1. Durable Reflector Battens:

For cost effective lightings of working areas with low to medium visual requirements, such as in sheet metal processing areas, industrial sheds, workshops, stores, warehouses etc.These luminaries are manufactured with powder coated reflector which provides diffused and uniform light distribution

2. single Reflector Battens (Chalk Board Light)

Chalk board in schools, notice boards, electrical control rooms, Supermarket shelves and areas requiring good vertical surface illumination.

The assymetrical light distribution minimises light pollution and provides exellent vertical illumination. The use of assymetrical reflector provides highest visual comfort, since only the surface will be lit and shielded from the critical direction view.

Features

Light weight with smart design.Natural silicon gel gasket used in the housing to ensure the water proof function.Moisture and corrosion resistant injection moulded bodyPrismatic diffuser with unique shape design to get standard rayEasy and quick installationEnergy control and long life magnetic Ballasts

Ballast : Vaccum pressure impregnated type.Lamp / Starter Holder : Push fit type, body made of heat resistant polycarbonate (PC)Starter : Glow type starterInternal wiring : PVC insulated, heat resistant and solid conductorMounting System : Surface mountingMaintenance ; Easy maintenance by removal of diffuser and gear trayDegree of protection : IP65

Applications

Suitable for lighting applications in humid, dusty, corrosive areas like, conveyor belts, galleries of industrial plants and factories, kitchen, shower rooms, laundries, catering establishments, car parks, outdoor areas etc

Features

Luxurious, elegant and latest design, new style, fits all kinds of occation High quality aluminium material and static powder coated finish conforms to IEC standard.Low noise, free flickering and durable magnetic BallastEasy installationDegree of protection : IP20

Accessories

Ballast : Vaccum pressure impregnated type.Lamp Holder : Push fit type, made for heat resistant polycarbonate (PC) and extremely heat resistantStarter Holder : Push fit type, made of heat resistant polycarbonate (PC)Starter : Glow type starterInternal Wiring: PVC insulated, heat resistant and solid conductor Terminal Connector : 3 way 6 amp

Applications

General purpose luminaries, suitable for use in supermarkets, shops, schools, factories, workshops, stores etc.The fitting is suitable for areas where upward components of light is required so as to reduce high luminious contrast between the fitting and the ceiling, thereby overcoming the gloomy effect.

Material Specifications

Chassis used with newly desinged inclined basis, white epoxy powder coated, which can match various types and structures of ceiling frames.The reflector is adopted with high quality electroplated material made in England, high purity aluminium, bright anodised, anti irridescence.High quality magnetic Ballast and long life.No noise, low temperature, low power consumption.

Accessories

Ballast : Vaccum pressure impregnated type.Lamp / Starter Holder : Push fit type, made of heat resistant polycarbonate (PC) and extremely heat resistantStarter : Glow type starterInternal wiring : PVC insulated, heat resistant and solid conductorTerminal Connector : 3 way 6 amp

Other features

Cable Entry: Through 19 mm knock-outMounting System: Suitable for surface mounting or through two conduit suspension.Maintenance: 4 springs anchorising system facilities easy removal and maintenance operations.Options: HPF, electronic Ballast, dimmable Ballast emergency power pack, silicon insulated wiring custom made version of the above can also be offered.

Applications

These luminaries is are used for all economical energy saving lighting installation for medium visual requirements such as offices, sales and display areas, also for banking and counter halls, hotels, restaurants and living roomsOptical System: This range is for basic applications where a cost effective installation is of paramount concern and the angle of cut off less interest. The range offers higher luminious efficiency from spectacular aluminium reflectors and therefore offers increased lighting level. These louvers offer the best overall performance with respect to efficieny and illumination control.

SB 4007

A bulkhead light suitable for a variety of uses. Manufactured from polycarbonate (PC) material.The standard version has a clear diffuser with a white base.

Application

All commercial and industrial environments

Spacification

Polycarbonate (PC) body and diffuserIP65 ratedBC adaptors can be fitted for direct installation on to BC holdersE27 Holder, Max. 100W.

Material Specifications

Chassic is used with newly designed inclined basis, white epoxy powder coated, which can match various types and structures of celling frames
The reflector is adopted with high quality electroplated material made in England, high purity aluminium, bright anodised, and-irridescence
High quality magnetic Ballast and long life.No noise, low temperature, low power consumption.

Acceessories

Ballast : Vaccum pressure impregnated type.
Lamp/Stater Holder : Push fit type, made for heat resistant polycarbonate (PC) and extremely heat resistant
Starter : Glow type starter
Internal wiring : PVC insulated, heat resistant and solid conductor
Terminal Connector : 3 way 6 amp

Other Features:

Cable Entry: Through 19mm knock-out
Mounting System: Suitable fo recess mounting on 600x600mm, T type false ceiling
Maintenance:4 springs anchorising system facilitates easy removal and maintenance operations
Options:HPF, electronic Ballast, dimmable ballast, emergency power pack, silicon insulated wiring, custom made version of the above can aslo be offered.

Applications:

These luminaries is used for all economical energy saving lighting installation for medium visual requirements such as offices, sales and display areas, also for banking and counter halls, hotels, restaurants and living rooms

Optical System: This range is for basic applications where a cost effective installation is of paramount concern and the angle of cut off is of less interest. The range offers higher luminous efficiency from spectacular aluminium reflectors and therefore offers increased lighting level. louvers offer the best overall performance with respect to efficiency and illumination control.

Material Specifications

Chassis is used with newly designed inclined basis, white epoxy powder coated, which can match various types and structures of ceiling frames.The diffuser: PMMA PrismaticFrame: High purity aluminium, bright anodised, anti-irridescenceHigh quality magnetic Ballast and long life.No noise, low temperature low power consumption.

Accessories

Ballast : Vaccum pressure impregnated type.Lamp / Starter Holder : Push fit type, made of heat resistant polycarbonate (PC) and extremely heat resistantStarter : Glow type starterInternal wiring : PVC insulated, heat resistant and solid conductorTerminal Connector : 3 way 6 Amp

Other features

Cable Entry: Through 19 mm knock-outMounting System: Suitable for recess mounting on 600x600mm, T-type false ceiling.Maintenance: 4 springs anchorising system facilitates easy removal and maintenance operations.Options: HPF, electronic Ballast, dimmable Ballast emergency power pack, silicon insulated wiring custom made version of the above can also be offered.

Applications

These luminaries is are used in situations where the requirement of light is glare-free soft and diffused. These fittings will meet most of the lighting requirements in offices, banks, schools, hospitals, shopping complexes, sales counters, lobbies etc.Optical System: UV stabilised diffuser fitted to aluminium frame ensures maximum light transmission. The calculated design of prisms results in controlled uniform diffusion of light. Also this attractively styled prismatic diffuser has a brilliant lighting effect with high efficiency.

Features

Architectural stylish appearanceReflector, hydro formed aluminium anodisedHigh performance, heat resistant tempered glassSilicon gasket is used in between reflector and glass Anti-corrosion

Ballast :Vaccum pressure impregnated type

Lamp Holder :Porcelain

Ignator :Super imposed pulse ignator, fully encapsulated vibration resistant.

Iinternalwiring :PVC Insulated, heat resistant wire

Terminal Connector :3way 6 Amp

Degree of Protection :IP65

Applications
Suitable for lighting application in factories, airport, stadium outdoor areas etc.

SMH 70/150/250/400
Operating voltage : 240V 50HzMax Watt : 70W/150W/250W/400WLamp : 70W/150W/250W/400W