SHILPI WORLDWIDE DMCC

Dubai, United Arab Emirates

SCTL is one of the leading enamelled copper wire producer in INDIA. Our company is using the state of art machinery for enamelled copper wire production. We can produce enamelled copper wire according to national and international standards such as IEC, & NEMA. The aim of our company is to produce high quality enamelled copper wire. Quality control team strictly applies quality control test at every step of production. SCTL is always the disposal of its client to provide technical assistance and share its vas experience with them.

Standard Conditions

For attenuation, VSWR 1.0 , ambient temperature 20 C

For Average Power, VSWR 1.0 , ambient temperature 40 C

Inner conductor temperature 100 C, no solar loading

AUTOMOTIVE CABLES

Automotive cables are manufactured to reference standards BS: 6862, JIS 3406 and IS: 2465 with bright annealed high conductive electrolytic copper conductor conforming to the requirements of IS:8130/BS6360 and insulated with specially designed dielectric grade PVC compound which is impervious to water, oil, petrol, acid and greases.

We specialize in a variety Automotive Cables, ranging from light duty throttle cables for outdoor power equipments to heavy duty brake & transmission cables for trucks and buses.

Battery cables are used in Original Equipment by India's leading vehicle manufacturers. Manufactured from electrolytic grade, bright annealed, bunched, bare copper conductors, these cables are insulated on state-of-the-art extruders with a special grade PVC compound that is formulated and manufactured in-house. This PVC is impervious to water, petrol, diesel, acids, engine & lubricating oils and grease. It is ideally suited for extreme weather conditions. These cables undergo stringent quality checks during manufacturing process and at the final stage. They are available in red and black colours in 25-metre and 100-metre coils / drums. These cables are also used in other applications where batteries are used, e.g. telecommunication, power, computers, etc. where the D.C. voltage does not exceed 100 volts. These cables are long-lasting and ensure proper distribution of power in the vehicle.

Solar Cables are designed to meet the growing needs of the solar industry. Our solar cables is just the beginning of our plans to develop and launch green technology in wires & cables. Solar Cables are flexible and are resistant to abrasion & moisture. Regardless of your panel-to-grid needs, we have the cables to meet your requirements.

Applications

These cables are designed for connecting photovoltaic power supply systems. These cables can be used indoor & outdoor for flexible and fixed installations with high mechanical strength in extreme weather conditions.

Standards

2 Pfg 1169/08.2007.

• Maximum Temperature at Conductor: 120C (20000h)
• Short Circuit Temperature: 200C (at conductor max. 5sec)
• Thermal Endurance Test: According to EN 60216-2 (temperature index +120C)
• High Temperature Pressure: Test according to EN 60811-3-1
• Damp Heat Test: According to EN 60068- 2-78 1000 hrs. at 90C with 85% humidity

Mechanical Characteristics

• Minimum Bending Radius: 5 x OD (fixed), 15 x OD (occasional flexing)
• Dynamic Penetration: According to requirement of Cables for PV systems 2 Pfg 1169/08.2007 Annex F
• Notch Propagation: According to 2 Pfg 1169/08.2007 Annex G
• Tensile Strength: 6.5 N/mm2 for insulation and 8 N/mm2 for sheathing according to EN60811
• Elongation of Insulation and sheathing: 125% according to EN60811
• Anticipated Period of Use: 25 years
• Shrinkage: 2% at 120C according to EN 60811-1-3

EU Directives

• The cables are RoHS (Restriction of certain Hazardous Substances) compaliant as per EU Directives 2002/95/EC

Chemical Characteristics

• Mineral Oil Resistance: according to EN 60811-2-1
• Ozone Resistance: according to EN 50396 part 8.1.3 Method B
• Weathering-UV Resistance: according to HD 605/A1 or DIN 53367

cables confirm to TUV specificationst.

TYPE 2

DC Solar Cables are Single core Copper cables each for +ve and ve. They are insulated with HR 105C PVC compound and and sheathed with UV stabilized HR 105C PVC compound.

TYPE 3

DC Solar Cables are Single core Copper cables each for +ve and ve. They are insulated with XLPE compound and and sheathed with UV stabilized PVC ST2 compound.

B. Array Junction Box to Main Junction Box and Main Junction Box to Inverter

These Solar DC cables which are not exposed to sunlight and are always routed through PVC Pipes which are laid underground. Choice of cables can be done from any one of the options given. Generally Option 3 is chosen for this route.

Electrolytic Multi Stranded tinned copper conductor flexible as per IEC 60228 Class 5.

InsulationCrosslinked Halogen Free & Flame Retardant

SheathCrosslinked Halogen Free & Flame RetardantSheath in Black/Blue/Red Colour

Thermal Characteristics

• Ambient Temperature: -40C +90C
• Ammonia resistant : 30 days in saturated ammonia atmosphere (internal testing)
• Very good resistance to oil and chemicals
• High wear and robust, abrasion resistant
• Acid & Alkaline Resistance: According to EN 60811-2-1 (Oxal acid and sodium hydroxide)

Fire Performance

• Flame retardant according to IEC 60332-1-2
• Low smoke emission < 20% as per ASTM D-2843
• Halogen free according to EN 50267-2-1/- 2, IEC 60754-2
• Acid gas emission not more than 0.5% as per IEC 60754-1 pH minimum 4.3 as per IEC 60754-2 conductivity maximum 10 as per IEC 60754-2
• Toxicity according to EN 50305, ITC- index< 3

Specifications

As per TV Rheinland specification: 2 Pfg 1169/08.2007.

Solar Cables used in Solar Farm installations are mainly categorized as given below:

A. PV module to PV module and PV modules to Array Junction Box

These cables though not exposed to direct sunlight are throughout the day time exposed to diffused/ indirect sunlight and atmospheric temperatures in open air.

TYPE 1

DC Solar Cables are Single core Copper cables each for +ve and ve. They are insulated and sheathed with Cross Linkable LSOH which has UV as well as Ozone protection properties. These

C. Inverter to Transformer Primary

The Three Phase AC output from the Inverters is connected to the Transformer Primary through Underground Armoured Cables. These cables are Copper or Aluminium XLPE insulated, GI armoured, UV stabilised PVC ST2.

D. Transformer Secondary to RMU/Switchyard

The Three Phase AC output from the Tranformer Secondary is connected to the RMU/Switchyard through Armoured Cables. These cables are Copper or Aluminium XLPE insulated, GI armoured, UV stabilised PVC ST2.

E. RMU to Switchyard

Three Phase AC connection from the RMU is connected to the Switchyard through Armoured Cables. These cables are Copper or Aluminium XLPE insulated, GI armoured, UV stabilised PVC ST2.

SHILPI twisted paired cables are best suited for telephone and switchboard cabling applications. the conductor is made of solid annealed, high conductivity bare copper. The conductor is insulated with special grade high-density polyethylene with different colours. The insulated cores are twisted with uniform lay to form pairs and are bunched together in such a manner so as to minimise cross talk. In 50 and 100 pair cables the units of 10 and 20 pairs respectively are identified with colour binders and stranded to form the laid up cable. The laid up cable is further jacketed with a grey colour fire retardant (FR) PVC specially formulated and manufactured in-house, with high oxygen and temperature index. The cables can be used for switchboard and internal telephone wiring in high-rise buildings, offices, factories, hotels, residential complexes, etc. They generally conform to ITD specifications G/ WIR-06/02. May 94. Stringent quality control at every stage, from raw material through manufacturing, upto the finished product, guarantees high quality.

Salient Feature : LowAttenuation LowCrosstalk FireRetardant Jacket

Telephone cables is a pair of copper wires runs from a box at the road to a box (often called an entrance bridge) at your house. From there, the pair of wires is connected to each phone jack in your house.

Along the road runs a thick cable packed with 100 or more copper pairs. Depending on where you are located, this thick cable will run directly to the phone company's switch in your area or it will run to a box about the size of a refrigerator that acts as a digital concentrator. All sizes of telephone cables are available from 2 pairs to 60 pairs.

JASOD611 AVSS

SHILPI twisted paired cables are best suited for telephone and switchboard cabling applications. the conductor is made of solid annealed, high conductivity bare copper. The conductor is insulated with special grade high-density polyethylene with different colours. The insulated cores are twisted with uniform lay to form pairs and are bunched together in such a manner so as to minimise cross talk. In 50 and 100 pair cables the units of 10 and 20 pairs respectively are identified with colour binders and stranded to form the laid up cable. The laid up cable is further jacketed with a grey colour fire retardant (FR) PVC specially formulated and manufactured in-house, with high oxygen and temperature index. The cables can be used for switchboard and internal telephone wiring in high-rise buildings, offices, factories, hotels, residential complexes, etc. They generally conform to ITD specifications G/ WIR-06/02. May 94. Stringent quality control at every stage, from raw material through manufacturing, upto the finished product, guarantees high quality.

Salient Features : LowAttenuation LowCrosstalk FireRetardant Jacket

RG SERIES MIL C 17 TYPE HIGH FREQUENCY CO-AXIAL CABLES

RG Wire & Cable Limited provides a comprehensive and complete range of RG Series coaxial cables, in accordance with MiL C 17 specifications. The details of some of the key products are included below; however other products are available, also in non standard designs and colors upon request.

Multicore overall screened data cables have individually insulated cores laid up in an aluminum/polyester tape. A tinned copper drain wire is laid under and in contact with the screen.

Solar cable is the interconnection cable used in photovoltaic power generation. A solar cable interconnects solar panels and other electrical components in the photovoltaic system. Solar cables are designed to be UV resistant and weather resistant. It can be used within a large temperature range and are generally laid outside.

The cable is tested to last 25 years. All sizes of solar cables from 0.5 SQMM to 300 SQMM are available.

Special Properties of Solar Cables

• Lifetime reliability: lasts up to 30 years even under tough external conditions.
• Outdoor durability: resists extreme temperatures (-40C to 120C maximum at the core) and ozone resistant.
• UV resistance: full protection against ultraviolet rays.
• Halogen-free: Low Smoke Emission & Low Toxicity/Corrosivity during fire.
• Properties against fire: flame retardant, fire retardant.
• Flexibility and stripability: for fast and easy installation.
• Fully recyclable: in accordance with new environmental regulations.
• Easy installation with color identification (blue, red).
• Suitable to common connector types.
• UL, TV, UTE and IMQ-certified.

Constituents

Shilpi Solar Cables are manufactured with the following materials

1. Annealed Tinned Copper Conductor
2. Cross Linked Polyolefin Compound
3. Zero Halogen Polyolefin Compound

Required Features of Solar cable

Description:

• CDMA800/GSM900 mobile system
• Repeater antenna , station antenna
• Point to point & Multipoint system

Description:

Available in a wide range of materials, these cable ties all feature internal serrations allowing for a positive hold onto cable and pipe bundles. The design of the head guarantees a high tensile strength whilst allowing a very low insertion force, this, combined with the bent tail design of many of the ties ensures a simple and quick installation. Whilst easily installed by hand, - manual and pneumatic (for high volume applications) tensioning tools are available to ensure consistency of installation.

Description

Fiber optic patch cords form the all important link between complex electronic system components and the fiber plant. patch cords are available in all standard connector styles, all standard fiber types and all standard cable configurations to meet all your interconnection needs. They are available in any length and are factory terminated, assembled, tested and inspected prior to shipment. These assemblies meet IEC, JIS and Belcore performance requirements as applicable. All Wirewerks patch cords are RoHS compliant facilitating use in European applications. Custom patch cord assemblies are also available upon request.

WIRING HARNESS

Wiring Harness for each vertical of automotive Industry, as small as 2 wheeler to as big as Commercial vehicle harness, Shilpi Cable gives solutions to wiring connectivity of a vehicle from modular to complete assembly from head to tail

• Harness for 2/3 Wheelers
• Harness for Commercial Vehicles
• Harness for Utility Vehicles
• Harness for Tractors

Note:Values typical, guaranteed within 5 % Any dimension could be changed without prior information under the organization's continual

We are an established manufacturer, supplier, and exporter of wide array of power connector, and power code. We are one of the prominent and dependable power connector manufacturers that serve the ever-growing requirements of Indian Power Sector Industry for more then a decade. Our manufactured range of power connector is broadly used to join cables, wires or various machines parts and manufactured with different high grade material of construction such as plastic, fiber, iron etc. Our product line is renowned for the distinguished features like corrosion resistant finish, excellent performance, operational fluency and polished surface. To manufacture our products, we adhere to all the prevailing rules and regulations of industry.