Standard Group

Dubai, United Arab Emirates

We offer a wide selection of genuine Quincy compressor parts and fluid products to keep your compressor up and running.

A Quincy air compressor is designed, engineered and built to provide many years of reliable service. The warranty programs, as well as round-the-clock technical support by Quincy distributors, will ensure customer satisfaction

Introducing ' Alma Pompe" italy Submersible Pumps.

Leading manufacturer in the field of Electric submersible pumps for sewage and drainage water with complete range between 0 and 1000 m3/hr flow.

Can be used for unscreened water, effluent, acid or alkaline water, animal slurry, sea or brackish water, corrosive liquids.

Suitable for clear waters, weak or slightly aggressive.

DIMENSIONS

• A = 416 mm
• B = 169 mm
• C = 92 mm
• D = 62 mm
• E = 1 Gas

OPERATION

• Continuous - complete immersion pump.

CONSTRUCTION

• Motor body: Cast aluminum and anodized.
• Cover: Cast aluminum and anodized.
• Pump body: Cast aluminum and anodized.
• Speaker: Nylon fiber reinforced resistant to heat and corrosion.
• Impeller: Open to shim reinforced nylon fiber glass resistant to heat and corrosion.
• Motor: Insulated dry room.
• Insulation: Class F.
• Degree of protection: IP 68.
• Bearings: Rolling lubricated for life.
• Mechanical seal: Aluminium / carbon.
• Radial lip seal: rubber.
• Cable: Neoprene H07RN-F 10 metres.
• Gland: Brass with protective sheath.
• Single-phase version: Built-in condenser, manual start, auto start floating.
• Discharge diameter: gas.

SPECIAL VERSIONS

• FUP-BT: a low-voltage 42 V AC (CEI 107-43). Borehole particularly suitable for operation in plants where it is necessary to have security against shock.
• Single-phase version: waterproof box including capacitors and switch.
• Cable: Neoprene H07RN-F 5 metres

A Reciprocating/Piston air compressor is a positive displacement compressor that uses a crankshaft-driven piston and cylinder to compress the air. A single-stage reciprocating piston compressor works by drawing the air into the cylinder where it is compressed in a single piston stroke of approximately 120 PSI and then sent to a storage tank. A two-stage compressor includes an additional step where the air is compressed by a second, smaller piston to a pressure of up to 175 PSI.Quincy piston air compressors are well-suited for various applications such as oil refineries, gas processing plants, refrigeration and industrial plants, etc. with options that include pressure lubricated, splash lubricated, single stage and application-specific models.

• 3-30 hp
• Gas and electric
• Over 90 years of proven quality

Quincy oil-free compressors can provide the high-quality, contaminant-free air that is essential in critical environments. Theyre also designed to comply with the ISO 8573.1 Class Zero standard while delivering superior performance and world-class efficiency.

• 2-30 hp
• High Efficiency IE3 motors
• Low sound level

A Rotary screw air compressor is a positive displacement compression system that includes a pair of matching helical screws. An oil-flooded rotary screw compressor includes a lubricant that fills the gap between the rotors, which creates an air-tight hydraulic seal and transfers mechanical energy between the two rotors. The air moves through the threads as the screws rotate, and the meshing screws force the air through the compressor.

• 5-350 hp
• Quiet & Reliable
• 24-hour operation
• Precision-crafted rotors
• Premium Reliability
• Superior Efficiency

Features

• Developed for lifting and hoisting technologies, the new IRC Series offer a large range of options and solutions. Composed of three steps of gears the IRC Series is available in five different sizes.

Product Advantages

• High efficiency
• Compact space saving design
• Quiet operation
• Long time lasting products, low maintenance
• Large range of ratio and high service factors

Features

• Available in one or two stage of gears, the IR Series provide optimal solutions for a large range of application. The unicase housing of the gearbox and the gears technology is offering a perfect balance between power and space optimization.

Product Advantages

• Compact modular mounting
• Large range of mounting solutions
• Adapted to a large range of sectors and applications
• High ratios to reach low rotation speed
• Support high radial load.

Features

• The parallel helical shaft gear units YP series remain the optimal solution for complex and space limited applications. The fully reversible design of the gearbox offers a large range of mounting positions. The gears combinations allow high loads and the options for low output speed makes it the ideal solution for a very large range of applications.

Product Advantages

• Easy installation
• Large range of mounting combination
• High loads tolerance
• Multi stage options for low output speed
• Quiet operation
• Easy clean up

Features

• Designed to last, the helical bevel gear units IRK series are perfectly adapted for applications in need of high efficiency gearboxes. The gear design also offers a quiet operation of this unit. These advantages offer to you the guarantee of a noise free and low maintenance gearbox.

Product Advantages

• High efficiency
• Compact space saving design
• Quiet operation
• Long time lasting products, low maintenance
• Large range of ratio and high service factors

Features

• The shaft mounted gear series ( IRO ) are the best solutions for quarries and mining sectors. The backstop feature of the gearboxes allow you to load heavy charges on your inclined conveyors or applications. The IRO series also assist you with low maintenance and high reliability.

Product Advantages

• Easy mounting
• Backstop feature
• Heavy load resistance
• Designed for easy cleaning and dust resistance

Features

• Designed for heavy industrial duties, the A / AE series present the advantages of being perfectly adapted to hard environment and tasks. The gears are designed to help the prevention of noise and vibrations during long and hard operations.

Product Advantages

• Robust and resistant housing
• High gear ratio
• High torque and service factor
• Long operating life

Centrifugal Pumps

FTI centrifugal pumps are constructed from rugged, corrosion resistant materials including heavy gauge stainless steel and plastics specifically engineered for maximum corrosion resistance. Pumps are available in either vertical or horizontal configurations, either mechanically sealed or magnetically coupled for sealless operation. Mag drive pumps feature high-powered, rare earth magnetic couplings which allow the transmission of maximum horsepower.

Drum / Barrel Pumps

Finish Thompson powered, portable drum pumps are designed to provide safe and easy transfer of a wide range of fluids including difficult to handle liquids such as acids, bases and solvents. Containers are quickly filled or emptied without spills or splashes. Many different models and pump tube lengths are available to satisfy diverse customer requirements.

Neptune Mixer Company offers a complete line of Bung-Entering Drum Mixers. Two styles for water-like solutions use a folding propeller. Two styles (Series H & HGS) for viscous fluids use permanent blades and are offered in higher horsepowers. All Neptune Bung-Entering Drum Mixers fit through the standard 2-in. Bung on 55-gallon drums.

Quincy Compressor's reputation for quality dates back to 1920. Since then, they have continued to refine and improve their product offerings. In 1937, they have released the QR-25 reciprocating/piston compressor, which remains an industry standard known for its reliable performance in demanding applications. They are one of the leading manufacturers of Rotary and Reciprocating Air Compressors globally.

Wilden -The Power Behind Your Process

Since 1955 Wilden has been the market leader in air-operated double-diaphragm (AODD) pumps. AODD pumps are reciprocating, positive displacement pumps. The wetted path (the area in which the pumping media is contained) consists of an inlet and discharge manifold and two liquid chambers. An air valve in the Air Distribution System (ADS) alternately directs compressed air behind the diaphragms in the air chambers. Fluid is drawn into one liquid chamber from the inlet manifold as fluid is expelled from the other liquid chamber through the discharge manifold. AODD pumps have many strengths. They do not require electricity, are self-priming, can pump fluids with solids in suspension (rocks and debris), can run dry or be dead headed without damaging the pump. Below are some features and information on the type and sizes of pumps available:

• Intrinsically safe operation
• Ability to run dry
• Ability to dead head
• Flows upto 300 GPM
• Available ports size from 1/4" to 4"