Finned Tube Heat Exchanger Suppliers & Manufacturers

YOU ARE IN : UAE / Tools & Equipment / Heat Transfer Equipment / Finned Tube Heat Exchanger

View 107 Products below

  • Enerquip Fabricates Shell Heat Exchangers

    • Alloy : 20,
    • Series : AL-6XN,
    • Materials : stainless steels
    • Monel : 600

    Enerquip fabricates shell and tube heat exchangers from a wide variety of stainless steel alloys, from common 304L and 316L to duplex stainless steels like 2205, 2507 and Zeron 100. We also use corrosion resistant alloys like Hastelloy, Alloy 20, Monel 600, AL-6XN, Titanium and copper-nickel alloys. Because Enerquip respects our customers’ concerns about cross-contamination of materials, we do not work with carbon More...

  • Plate Heat Exchanger

    • Brand Name : Turbinedar

    We are offering Plate Heat Exchanger. Design Pressure: 0.6 MPa Design Temp: 150 º C Gasket Material: EPDM Heat transfer surface: 299 m² Weight: 1054 Kg.

    Jina Machine Pars

    | More...

  • Corrugated Tube Heat Exchangers

    The development of corrugated tubes represents perhaps the most exciting advance in heat transfer technology. It has long been accepted that if you agitate a hot liquid it cools faster since the shaking produces turbulence, which enhances the heat transfer from the liquid to the air. HRSFUNKE developed heat transfer enhancing corrugated tubes to achieve a similar result by creating turbulence in the media without usi

    Hrsfunke Heat Transfer Fze

    Dubai | More...

  • Heat Exchanger

    We are counted as a major Manufacturer, Exporter and Supplier of superior quality Heat Exchanger . Our entire range of Heat Exchangers is fabricated using high quality raw materials. Our Heat Exchangers are reliable and high on performance. Further, our Heat Exchangers are manufactured as per the set industry standards. Highlights : Durable Market leading prices High efficiency Excellent quality

    Tecsol International L.l.c

    Deira | More...

  • Post your Buy Requirement

  • Heat Exchangers

    Heat exchangers are basically stills, which are designed as per ASME sec VIII DIV-2, as the heat transfer area is important factor. These are sanitary type with 100% drain ability; it may double tube sheet type or shell & tube type. There are two sides primary & secondary side, always primary side is utility and secondary side is product. All the product contact parts are ­SS 316L and utility contact parts are SS

    Ruby Enterprises

    Ruby enterprises | More...

  • Duplex Heat Exchanger

    We are offering Duplex Heat Exchanger. Our specialized storage system covers all type of special needs amongst clients from U.S Military and many of U.NNATO projects. We do supply different type of skid equipments such as pump skids, filtration skids, etc. and fabricated accessories and parts required for various types of plants including sewage water treatment plants, thermal plants, power plants, desalination plant

    Fourlines Uae

    United Arab Emirates | More...

  • Heat Exchangers

    We have numerous dealers and distributors associated with us to make our products available to buyers with ease and make timely delivery. In order to keep the products in safe condition during transit and handling, we meticulously pack them at our own packaging facility. Also, we make sure that the packaging material is sourced from the trusted vendors. Features: Great strength Accurate dimension Smooth finish

    Petrosolutions Fze

    Sharjah | More...

  • Steam Heat Exchanger

    STEAM HEAT EXCHANGER To raise the temperature of well effluents to prevent hydrate formation, reduce viscosity, and break down emulsions for efficient separation of oil and water. Heaters upto 15000 psi ASME ‘U’ Stamp Vessel H2S Services Heat Transfer Capacity from 3 to 5 MM Btu/hr 20′ DNV/CSC Frame PED 2014/68/EU ICE Marking

    Oilwell Middle East

    sharjah | More...

  • Pressure Vessels And Heat Exchangers

    Using high grade carbon steel and stainless steel, we are manufacturing pressure vessels and heat exchangers that are used for various applications and are widely in demand in several industries. These fabricated products are minutely examined and well met international standards. Our core emphasis focuses on designing and manufacturing as per the client’s details and specifications, which made us one of the leadin

    Ogasco

    Abu Dhabi | More...

  • Heat Exchangers

    Techno Futura has the expertise to thermally and mechanically design and fabricate shell and tube heat exchangers as per the customer supplied process data and mechanical and metallurgical requirements for the refining, petrochemical, and gas processing industries. We offer design and fabrication of heat exchangers in accordance with ASME & TEMA Standards. Our streamlined design process for the heat exchangers relies

    Technofutura

    al ain | More...

  • Heat Exchanger

    Years of experience and partnering with reliable manufacturers of heat exchangers and air coolers (COLMAS of Milan, Italy), brings our customers added value, realizing fully well the importance of heat exchange in their core business and processes. Optimized design and engineering ensures highly efficient heat exchange resulting in minimum losses and safe and competitive products. Our broad range of heat exchangers a

    Unidaan Fz

    dubai | More...

  • Plate Heat Exchangers

    Ideal for heating, cooling, heat-recovery, condensing and evaporation processes. • High overall heat transfer coefficient for efficient heat transfer. • Compact design gives maximum surface area to material volume without compromising mechanical robustness. • Low installation cost. • Easy dismantling for rapid cleaning. • High performance with low hold-up volume. • Versatile, modular design. • Plate and

    Pearl Pool Trading Llc

    Dubai | More...

  • Steam Heat Exchanger

    Raising the temperature of the well effluent to prevent hydrate formation, assists in the reduction of viscosity in heavy oil applications, and helps break down emulsions. Automatic temperature control as an integral part of the design and Improves separation of oil/water emulsions Coil Working Pressure Heat Transfer Capacity Design & Certification Service Skid/ Frame : Up to 15000psi : 4mm Btu/Hr : ASME VIII, Div-1,

    Moes

    Sharjah | More...

  • Post your Buy Requirement

  • Air Cooled Heat Exchanger

    ENGINE RATING  BASELINES Engines are rated at standard SAE J 1349 testing code. Net power rating conditions are obtained at 29.61 inches Hg (100.3 kPa) barometer (approximately 300 feet or 91.44m above sea level) and 77°F or 25°C. A deduction of 3% from engine horsepower rating at standard SAE conditions shall be made for diesel engines for each 1000ft or 305m altitude above 300ft or 91.4m A deduction of 1% from e

    Fire Driver

    DUBAI | More...

  • Heat Exchanger

    Heat exchanger tube in an extensive range of austenitic stainless steels, duplex stainless steels, nickel alloys and titanium, suitable for all types of heat exchangers and seawater coolers  We supply heat exchangers tubes from India  Available size up to size 40mm

    Leotech Llc

    dubai | More...

  • Plate Heat Exchangers

    Paraflow Plate Heat Exchangers: The Paraflow is the original plate type heat exchanger designed by APV to provide maximum efficiency and cost effectiveness in handling a wide variety of heat transfer applications. Units come in different configurations, as follows:  Single Wall Gasketed (Paraflow) Plate Heat Exchangers - The traditional plate and frame heat exchanger Double Wall (Duo-Safety) Plate Heat Exchangers -

    Technology Ventures

    Sharjah | More...

  • Heat Exchangers

    Heat Exchangers (Plate type, Shell & Tube type, Fin fan type etc) Whether client requires newreplacement of assembly of any type of heat exchanger or replacement parts such plates and gaskets of plate type heat exchanger (PHE), we can support client for any needs. We can supply gaskets and replacement plates of any make and type of PHEs. Gaskets and plates are available from EuropeIndia as per requirement of clients.

  • Heat Exchanger

    We bring forth the finest range of Heat Exchangers . These Heat Exchangers are highly demanded and are manufactured with the use of the best quality raw material for increased efficiency and durability. Our Heat Exchangers are produced well in accordance to the approved industry norms and are affordable as well. Applications : Power plant Cement plant Oil and refinery Chemical processing plant Specification : As per

  • Plate Heat Exchangers

      Application range : Operating Pressure: up to 25 bar for standard units Operating Temperature: up to 170°C for standard units – higher values on request-   Plates : Materials: 4301, 1.4404, 1.4571, 1.4539, 1.4547 / SMO 254 Nickel, nickel alloys, titanium grade 1, titanium grade 11 Gaskets : Materials: Elastomers (nitrile, EPDM, FKM / VITON and others) PTFE-enveloped elastomers (SIGMA COAT ) Aramid fibers – m

  • Heat Exchangers

    Heaters and Heat and cool pumps are usually useful for all the climates. The heat and chill units are very much cost effective and serves to the green nature without effecting the same. The detailled specification sheet with model numbers and capacity can be found in the link below.

    Proteam Europa Middle East

    Dubai | More...

  • Tube Heat Exchangers

    Deals in Electrical Parts, heat exchangers such as plate heat exchangers, volvo spares, Clutch Facings, brake valves, Repair Kits, Brake Liners, shell heat exchangers, Copper Brass, Cooling Towers, Tube Heat Exchangers, account coils, clutch master cylinders, Engine Valves, Filters, brazed aluminiums, Pressure Plates, clutch servos, friction materials such as brake shoes, brake boosters

    Dolphin Group

    | More...

  • Tube Heat Exchangers

    Deals in Steel Structures, Boilers, Tanks, Pressure Vessels, shell heat exchangers, Tube Heat Exchangers

    Prestige

    | More...