Gas Valves in UAE

We are offering We have a wide range of cylinder valves both british standard and CGA .These valves are manufactured in accordance with standard and a suitable for both low pressure and high pressure application.Medical valves are chromeplated. more...

• Permitted gas families : II + III (according to EN 437)
• Permitted storage temperature : -25 °C to 70 °C
• Degree of protection : IP40 in combination with a suitable plug
• Permitted ambient temperature : 0 °C to 60 °C (-15 °C to 70 °C on request)
• Maximum inlet pressure : 65 mbar (CE), 0.5 psi (CSA)
• Permitted orientation when installed : Coil orientation between standing upright and lying horizontally
• Minimum signal pressure : -30 Pa
• Offset correction : ±20 Pa

The main use for our zero-pressure gas valves is in condensing boiler applications for domestic heating systems in the low to medium output range. Our portfolio includes both pneumatically and electronically controlled gas valves for premixing and atmospheric gas burners. The main use for our zero-pressure ga more...

• M.O.C. : CI / CCS / CSS / FCS
• RATING : #150, #300, #800
• Type : Single / Three Piece Design, Jacketed

TRINE offering wide range of Industrial Valves for various applications, has introduced a range of Zero Leakage Ball Valves ideal for air, gas, water, chemicals & steam service from 6mm to 200mm in Cast Iron, Cast Carbon Steel & Stainless Steel (CF8CF8M) Investment Castings constructions. The seat, seal and g more...

• Material : Brass, Bronze, Full, Grade: 316,
• Origin : Japan, Taiwan, Korea, Italy, Germany,

Ball valve fullss bore, (Thread, Screwed) & Flange Type Origin: Japan, Taiwan, Korea, Italy, Germany, Standard & Specification : Material: Brass, Bronze, Fullss, Grade: 316, Available sizes in Stock: ½” to 4” (15mm to 100mm ) Thread Type, And 1” to 16” (25mm to 400mm ) Flange Type. more...

Ball Valves We are offering a wide range of Ball Valves in Abu Dhabi, UAE. Ball Valves are largely used in various industries for a number of applications. A ball valve is a device with a spherical closure unit that provides onoff control of flow, which can be attached on any one end of the pipe fitting. Ball more...

Known for its robust design, superior sealing areas, and stainless steel overlays, these ball valves enables full fluid flow with minimal pressure drop, making them ideal for handling viscous liquids. we are widely recognized as the leader in providing valve solutions for the oil and gas industries’ most se more...

We use Tube Clamps which are Designed as per DIN 3015 standards, designed structure to provide resistance against impact and vibration dampening, Provides strength in the direction of the tube axis ensuring a high degree of sound deadening, Selection of pipe - tube clamps are as per pipe od , w.p. rating , ty more...

VIMEC  offers a wide range of soft & metal seated Ball Valves in 2 pc, 3 pc body construction (Floating & trunnion design). Vimec Ball Valves provide positive shut-off minimizing the pressure drop. Trunnion-mounted, double block-and-bleed valves conform to API 6D standard. Other design features : Anti-Blow o more...

Ball Valves, Check Valves, Gate valves, Globe Valves, Safety Valves, Double Block & Bleed Valves, Butterfly Valves, Control Valves, Flow Meters etc. more...

Buyers are required to place orders; timely deliveries of consignments are our primary concern. Ours is a reckoned name in the domain as we are capable of bringing forth quality products, fabricated using the experts approved raw material. We only make use of certified raw material to maintain high standards. more...

Known for its robust design, superior sealing areas, and stainless steel overlays, these ball valves enables full fluid flow with minimal pressure drop, making them ideal for handling viscous liquids. AYTC is widely recognized as the leader in providing valve solutions for the oil and gas industries' most sev more...

Full bore, reduced bore, 2 way, multiport ball valve bodies and connectors (flanged & butt-weld). Size range 2” – 20”, pressure class 150# - 2500# in all ASTM /DIN/EN grades (10 kg - 3, 000 kg single piece) more...

Included total range of solenoid valves intrinsically safe and explosion proof of different Coil voltage  from 12 DC to 230V DC and mounting types  screwed and flanged.Automatic Gas Shut off using solenoid valve in central gas systems  ensures the safety of man and materials. more...

Parker supplies a comprehensive line of ball valves that control flow direction and provide shut off, with port configurations that support a diverse range of system requirements. Available in stainless steel, PFTE, steel and brass, these ball valves offer a variety of seat and seal materials. more...

Ball Valves, Check Valves, Gate valves, Globe Valves, Safety Valves, Double Block & Bleed Valves, Butterfly Valves, Control Valves, Flow Meters etc. more...

we – “goodwin trading llc”, deals in various types of valves like: 1. ball valves – stainless steel, carbon steel, brass, bronze in threaded & flanged type 2. gate valves – knife gate valve, cast steel gate valve, cast iron gate valve, pressure seal gate valve, plate gate valve, pneumatic gate valve more...

Full bore, reduced bore, 2 way, multiport ball valve bodies and connectors (flanged & butt-weld). Size range 2” – 20”, pressure class 150# - 600# in all ASTM DINEN grades (10 kg - 3500 kg single piece) more...

Design:  API608, BS5351, API6D, ASME B16.34, ANS B.16.10 Sizes:  1/2" to 12" Floating and Trunnion Mounted Pressure Ratings:  Class 150, 300, 600, 800, 900 and 1500 Connections:  Flanged Materials:  Carbon Steel, LTCS, Stainless Steel. Valves to other standards, materials can be supplied from our extensi more...

Sour Gas Valves are designed for oil and gas service where H2S is present. All pressure containing components are made from annealed 316 stainless steel material in compliance with NACE MR0175. These needle valves with metal to metal seats have a high level of safety and reliability under harsh operating cond more...

Ball Valves, Gate Valves, Globe Valves, Check Valves, Butterfly Valves, needle & plug valve etc Forged steel and ST. Steel small bore Gate, Flobe, Chect and Ball Valves up to 2 Flanged Ball, Gate, Globe and check valve and strainers class 150, 300 and 600 more...

Izes: ¼” to 48” castforged body class: 800, 2000, 2250, 3000, 5000 psi (thdd & sw), 150 to 2500 (flanged ends) ends: threaded, socket weld, flanged & butt weld. Port: regular & full construction: floating ball, trunnion mounted, side entry, top entry actuators: electric, pneumatic, hydraulic, gear operat more...