TECHNOLOGY VENTURES

Sharjah, United Arab Emirates

• HEATING EQUIPMENT
• HOT AND COLD DRINKING EQUIPMENT
• BAKING AND PASTRY EQUIPMENT
• REFRIGERATOR/ COLD ROOM

Galley water must first pass through a Grease Separator unit before entering any membrane wastewater treatment plant as FOGs can have an adverse effect on membrane performance and life expectancy.

Features:

• Resistant to high temperatures
• Hygienic material stainless steel AISI 316L
• Rigid construction to withstand vessel movement and vibration
• Resistant to organic solvents

• Main Switchboards
• Emergency Switchboards
• Automated Power Management Systems
• Alarm Monitoring and Control Systems
• Integrated Bridge Systems
• Generator Protection and Control Systems
• Propulsion Control Systems
• Automation Systems
• Weapon Supply Switchboards
• Control Consoles and Desks
• Power and Motor Control Centers
• Starter Panels
• Battery Chargers
• Rectifier Units
• Navigation Light Control Panels
• Engine Order Telegraphs

Our frequency converter has the following features:

• Power reach: 5, 5kW till 2500kW
• Voltage range: 400V till 690V AC or 560V till 975V DC
• Frequency drive: 0.01 till 200.0 Hz
• Interface: Profibus-DP / MODBUS-RTU / Ethernet, etc.
• Input: 6-pulse, 12-pulse, Active Front End, etc.

Tank comes with marine certificate: DNV, Lloyd, GL, ABS, BV, PRS or other class on demand. This is used for heating and storage of the sanitary hot water on ships. There are multiple means of heating: electric, steam, hot water or oil

Standard delivery consist of:

• - Certified black steel (galvanized) tank
• - 50mm insulation
• - Galvanized and powder painted steel plate as cover
• - Electric box and regulation plate installed on the tank
• - Heaters of ordered power
• - Safety valve 8 bar
• - All connected and tested

• Air-cooled Compressors
• Water-cooled Compressors

Optional accessories
• Diesel engine with E-Start/Stop, Hand-Start
• Electromagnetic-, centrifugal or hand operated clutch
• Oil level switch
• Thermostat for compressed air outlet
• Amperemeter
• Local-Remote switch
• Sequence selector switch used for more than one compressor

• Stiff Boom Range
• Knuckle Boom Range
• Telescopic Boom Range
• El Knuckle Telescopic Boom Range

• The Aquamar Watermakers are based on the principle that the sea water can be evaporated under a high vacuum at temperatures as low as 40C.The Aquamar units are designed to use a waste heat source like the engine jacket water from main engines or auxiliary diesels.The Aquamar Fresh Water is a compact assembly ready for installation on board. The heater and condenser are located inside the housing and separated by a demister witch prevents small salty water reach the condenser.The distillate water vapour after their condensation is removed from the unit by the distillate pump.

We market and install a wide range of high quality firefighting (FiFi) solutions of different capacities.

• Fire Monitors
• External FiFi
• Packages: FiFi-1 and FiFi-2

Biological Sewage Treatment Plant approved to IMO-Res. MEPC 2 (VI) Annex IV and Helsinki Convention.
The "KD-Oceanclean" series for gravity and vacuum toilet systems is designed to the latest state of aerated, "submerged fixed bed" biological treatment principe. It is a high efficient four chamber system.
The first chamber is the sewage collecting chamber. By aeration and mechanical grinding with a cutting pump the sewage is well mixed and prepared for homogenous overflow to the 2nd chamber.

• Type Approved to IMO MEPC 159(55)and MED Module B.
• The combination of a biological process with ultra-filtration without the need for final clarification or additional disinfection (e.g. chlorination and/or UV filtration) meets and exceeds the quality standards of IMO/MARPOL, HELCOM, USCG, US CFR40.133, Australian ADNOC and Australian Federal Environmental agency and the Alaska requirement.

1.Windows

• ISO-3903 TYPE-3 FIXED ALUMINUM WINDOW
• ISO-3903 TYPE-3 OUTBOARD UP-HINGED ALUMINUM WINDOW
• ISO-3903 WELDED TYPE STEEL WINDOW
• ISO-3903 WELDED TYPE STEEL WINDOW C/W DEADLIGHT

2.Hatches

• WATERTIGHT HATCH - DOG-CLIPPED TYPE
• WATERTIGHT HATCH - QUICK CLOSING DOG ARM HANDWHEEL TYPE

3.Doors

• WATERTIGHT DOOR - DOG-CLIPPED TYPE
• WATERTIGHT DOOR - QUICK CLOSING DOG ARM TYPE
• WATERTIGHT DOOR - QUICK CLOSING MECHANISM C/W LEVER
• WEATHERTIGHT DOOR - QUICK CLOSING MECHANISM LEVER TYPE C/W VIEWING PANEL
• WEATHERTIGHT SLIDING DOOR

Bilge Water separator approved to IMO-Res. MEPC 107 (49). The "Ocean Clean EB" series from 0, 25 to 5, 0 m/h capacity is designed on the background of 30 years of experience of oil-water separation of its designer Dieter van Zren.
The "Ocean Clean" system fulfills the test specification of a.m. IMO-Resolution more than required. The maximum oil content in the effluent water is less than 5ppm. The "Ocean Clean" is a 3-stage oil-water-emulsion separating system.
PRODUCT RANGE:

• OceanClean EB 0, 25
• OceanClean EB 0, 5
• OceanClean EB 1, 0
• OceanClean EB 2, 5
• OceanClean EB 5, 0

Small range equipments are reliable and compact, they combine a whole range of features and theyre suitable for ships with limited space and a low demand for water. In spite of having a small size they produce top-quality freshwater with a low electrical consumption

• Bulkhead watertight sliding door
• Fire doors

Chilled Water Air Conditioning

• UltraJet Models
• UJ251
• UJ305
• UJ305HT
• UJ340
• UJ376
• UJ377
• UJ410
• UJ451
• UJ575

• Scope of supply: two independent drive units, each consisting of:
  • pump,
  • electric motor,
  • oil tank,
  • air oil cooler,
  • directional control valve co-operating with remote control system, equipped with hand levers of local control,
  • valve block,
  • auxiliary hydraulic fittings with signalling elements.
• electric equipment of drive and signalling system in the range agreed with client,
• standard set of spare parts,
• technical-operation documentation,
• required certificates and guarantee documents,

Popular Marine Generator models are:

• M673LD3: 5/4.5 kW
• M673L3: 6/5 kW
• M843NW3: 12/10 kW
• M844LW3: 20/16 kW
• M1064 Series: 40-99/33-90 kW
• M1276A Series: 235-280/200-230 kW
• M773LW3: 9 kW @ 60 Hz / 1800 rpm 7kW @ 50 Hz 1500 rpm
• M844W3: 16 kW @ 60 Hz / 1800 rpm 12 kW @ 50 Hz 1500 rpm
• M864W3: 25 kW @ 60 Hz / 1800 rpm 20 kW @ 50 Hz 1500rpm
• M944T: 38 kW @ 60 Hz / 1800 rpm 32 kW @ 50 Hz 1500 rpm
• M944W3: 30 kW @ 60 Hz / 1800 rpm 26 kW @ 50 Hz 1500 rpm
• M1066 Series: 99-185 kW @ 60 Hz / 1800 rpm 80-155 kW @ 50 Hz 1500

The OptiMarin Ballast System (OBS) can easily be installed in existing or new ships and can handle flows up to 3000 m3/h. The MicroKill Medium Pressure UV can handle almost any flow when multiple reactors are built into a manifold system.

The components in the OptiMarinSystem are flexible; the installation is normally in the pump or engine room and in close proximity to the ballast pumps. The OptiMarin system uses existing ballast pumps, is small and modular, and does not restrict flow.

For certain ship types and for retrofit, the system can be delivered in a container including a booster pump for easy installation on deck or other available spaces. A skid solution can also be provided upon request.

Jets 50M is a floor mounted vacuum toilet in a modern design. It can be supplied with a vacuum operated or electronically operated mechanism.

Paraflow Plate Heat Exchangers: The Paraflow is the original plate type heat exchanger designed by APV to provide maximum efficiency and cost effectiveness in handling a wide variety of heat transfer applications. Units come in different configurations, as follows:

Single Wall Gasketed (Paraflow) Plate Heat Exchangers - The traditional plate and frame heat exchanger Double Wall (Duo-Safety) Plate Heat Exchangers - Used to prevent cross contamination of the fluids Semi-Welded (Paraweld) Plate Pair Plate Heat Exchangers - No gaskets on one plate channel, gasket on the other side for the ultimate in flexibility and safety

ParaBrazed Plate Heat Exchangers: ParaBrazed heat exchangers are a compact, cost effective unit designed to deliver high thermal efficiency while maintaining lower pressure drops. Its the perfect choice for many single and two phase heat transfer applications for industrial and refrigeration duties.

Hybrid Heat Exchanger - All Welded Design: All welded Hybrid heat exchangers combines the advantages of a plate and frame heat exchanger with those of a tubular exchanger. The APV Hybrid heat exchanger has a very flexible design for a wide range of temperatures and pressures.

Plate Type Evaporator

Scrape Surface heat Exchangers

Tubular Heat Exchanger

• Helical gear units
• Worm gear units
• Planetary gear units
• Bevel gear units
• Agitator gear units

Although modern hull coatings can provide some protection against corrosion they seldom offer a complete solution. For this reason, most operators choose to protect their vessels with a purpose designed impressed current cathodic protection system.