Wires #782215

Conductors: Stranded bare copper, ASTM B-173 and UL 62Separator: Paper tape between conductor and insulationInsulation: EPR compound, 90C compound class 3, table 8, UL 62Assembly: Insulated conductors cabled together with integral filled or rubber fillersSeparator: Talc for 8-2 AWGJacket: Black CPE 90C compound class 1.4, UL 62, table 15Color code: ICEA S-58-679, Method 1, table 1; 2c, 3c - black, white, green; 4c, 5c - black, white, red, green, orange

Conductors: Flexible strand tin copper, ASTM B 172 and ICEA S-75-381Separator: Tape separator between the conductor and insulationInsulation: Ethylene-propylene rubber (EPR), ICEA S-75-381 sec 3.15, table 3-12Grounding cond: Tin copper, ICEA S-75-381, table 3-12Ground check: Yellow Polypropylene-Insulation tin copper conductor, ICEA S-75-381 table 3-21Assembly: Sizes 40 and smaller: Three power, ground check and two polyester (green mylar) taped grounding conductors cabled together;Nylon open braid applied overall. Sizes 250 MCM and larger: Three power, ground check and two polyester (green mylar) tapedgrounding conductors cabled together to form round core; Single faced rubber filled binder tape applied overallJacket: Black extra heavy duty, integral-filled CPE thermoset compound, ICEA S-75-381 sec 3.21, table 3-3Color Code: ICEA S-75-381 sec 3.18; black, white, red

Portable Power Cable 90C UL C(UL) MSHAConductors: Flexible strand tin copper, ASTM B-172 Class I and ICEA S-75-381NEMA WC58Insulation: Ethylene-propylene rubber (EPR); ICEA S-75-381 sec 3.15, table 3-10Grounding cond: ICEA S-75-381; insulation color: greenAssembly: Four power and four EPR insulated grounding conductors cabled with rubber filler in center to form round coreSeparator: Single faced rubber filled binder tape applied overallJacket: Black heavy duty CPE thermoset compound, ICEA S-75-381 sec 3.21, table 3-4Color Code: ICEA S-75-381 sec 3.21 table 3-4; black, white, red, orange

Conductors: Extra flexible strand bare copperSeparator: Tape separator between conductor and insulationInsulation: Ethylene-propylene rubber (EPR)Reinforcement: Nylon open braid applied over insulationJacket: Black heavy duty CPE thermoset compound

Conductors: Flexible strand tin copper, ASTM B-172 and ICEA S-75-381NEMA WC58Separator: Tape separator between the conductor and insulationInsulation: Ethylene-propylene rubber (EPR), ICEA S-75-381 sec 3.15, table 3-9Assembly: Conductors and rubber fillers cabled to form round coreReinforcement: Single faced rubber filled binder tape over insulationJacket: Black heavy duty CPE thermoset compound, ICEA S-75-381 sec 3.4, table 3-4Color Code: ICEA S-75-381 sec 3.18; black, white, green

Conductors: Flexible strand tinned copper conductor, ASTM B-172 and ICEA S-75-381, table 3-22Conductor Shield: Extruded semi-conducting layer over conductor. ICEA S-75-381 sec. 3.14Insulation: Ethylene-propylene rubber (EPR) ICEA S-75-381, table 3-22Insulation Shield: Semi-conducting bedding tape and composite tinned copperpolyamide braid 60% minimum coverageColor Code: Polyamide braid color code - black, white, red, ICEA S-75-381Grounding Cond: Tinned copper - ICEA S-75-381 Tab. 3-25Ground Check: Yellow polypropylene-insulated tinned copper conductor, ICEA S-75-381 Tab. 3-22Cable Assembly: Three power conductors, ground check and two non-insulated grounding conductors cabled together to form a round cable coreSeparator: Single faced rubber-filled binder tape applied over coreJacket: Black, extra heavy duty, high torsion-resistant, integral-filled, reinforced Neoprene thermoset jacket, ICEA S-75-381 Tab. 3-3, 3-22, Sec. 3.21

Conductors: Flexible strand tin copper, ASTM B-172 and ICEA S-75-381NEMA WC58Separator: Tape separator between conductor and insulationInsulation: Ethylene-propylene rubber (EPR), ICEA S-75-381 sec 3.15, table 3-10Assembly: Conductors and rubber fillers cabled to form round coreReinforcement: Single faced rubber filled binder tape over insulationJacket: Black heavy duty CPE thermoset compound, ICEA S-75-381 sec 3.4, table 3-4Color Code: ICEA S-75-381 sec 3.18; black, white, green, red

Conductors: Stranded bare copper, ASTM B-173 and UL 62Seprator: Paper tape between conductor and insulationInsulation: EPR compound, 90C compound class 3, table 8, UL 62Assembly: Insulated conductors cabled together with integral filled or rubber fillersSeparator: Polyester tape for 8-2 AWGJacket: Black CPE 90C compound class 1.4, UL 62, table 15Color code: ICEA S-58-679, Method 1, table 1; 2c, 3c - black, white, green; 4c, 5c - black, white, red, green, orange

Conductors: Flexible strand bare copper, ASTM B 172 class KSeparator: Paper tape over conductorJacket: Black heavy duty EPR CPE two layers bonded thermoset jacket, oil resistant and flame retardant

Conductors: Flexible strand tinned copper conductor, ASTM B-172 and ICEA S-75-381, table 3-22Conductor Shield: Extruded semi-conducting layer over conductor. ICEA S-75-381 sec. 3.14Insulation: Ethylene-propylene rubber (EPR) ICEA S-75-381, table 3-22Insulation Shield: Non-conducting bedding tape and composite tinned copperpolyamide braid 60% minimum coverageColor Code: Polyamide braid color code - black, white, red, ICEA S-75-381Grounding Cond: Tinned copper - ICEA S-75-381 Tab. 3-25Ground Check: Yellow polypropylene-insulated tinned copper conductor, ICEA S-75-381 Tab. 3-22Cable Assembly: Three power conductors, ground check and two non-insulated grounding conductors cabled together to form a round cable coreSeparator: Single faced rubber-filled binder tape applied over coreJacket: Black, extra heavy duty, high torsion-resistant, integral-filled, reinforced Neoprene thermoset jacket, ICEA S-75-381 Tab. 3-3, 3-22, Sec. 3.21

Conductors: Flexible strand tin copper, ASTM B-172 and ICEA S-75-381NEMA WC58Separator: Tape separator between conductor and insulationInsulation: Ethylene-propylene rubber (EPR), ICEA S-75-381 sec 3.15, table 3-16Assembly: Conductors and rubber fillers cabled to form round coreReinforcement: Single faced rubber filled binder tape over insulationJacket: Black heavy duty CPE thermoset compound, ICEA S-75-381 sec 3.4, table 3-4Color Code: ICEA S-75-381 sec 3.18; black, white, red, green, orange

Conductors: Flexible strand tinned copper conductor, ASTM B-172 and ICEA S-75-381, table 3-22Separator: Polyester tape between conductor and insulation. ICEA S-75-381Insulation: Ethylene-propylene rubber (EPR) ICEA S-75-381, table 3-22Insulation Shield: Non-conducting bedding tape and composite tinned copperpolyamide braid 60% minimum coverageColor Code: Polyamide braid color code - black, white, red, ICEA S-75-381Grounding Cond: Tinned copper - ICEA S-75-381 Tab. 3-25Ground Check: Yellow polypropylene-insulated tinned copper conductor, ICEA S-75-381 Tab. 3-22Cable Assembly: Three power conductors, ground check and two non-insulated grounding conductors cabled together to form a round cable coreSeparator: Nylon open braid applied overallJacket: Black, extra heavy duty, high torsion-resistant, integral-filled, reinforced Neoprene thermoset jacket, ICEA S-75-381Tab. 3-3, 3-22, Sec. 3.21

Portable Power CableNominal voltage: RHHRHW-2 600V and 2000V, RW-90 CSA, 1kV, DLO 2kVConductors: Flexible strand tin coated copper conductor, B-172, ASTM B-33Separator: Tape separator between conductor and insulationInsulation: Ethylene-propylene rubber (EPR), UL, CSA, ICEA, AAR RP-588, 90CJacket: Black heavy duty, thermoset CPE, ICEA S-95-658 NEMA WC70, AAR RP-586Bending radius: For fixed minimum 4xD, for flexible minimum 6xD, D diameter of cable

Conductors: Flexible strand tinned copper, ASTM B 172 and ASTM B33, C22.2 No. 96-09 sec 5.3.1 table 3Conductor Shield: Extruded semi-conducting layer over conductor. C22.2 No. 96-09Insulation: Ethylene-propylene rubber (EPR) C22.2 No. 96-09 sec 5.3.4 table 2 & 4Insulation Shield: Non-conducting bedding tape and composite tinned copperpolyamide braid 60% minimum coverageColor Code: Polyamide braid color code - black, red, blue C22.2 No. 96-09 table 1Grounding Cond: Tinned copper - C22.2 No. 96-09 sec 5.3.2Ground Check: Yellow polypropylene-insulated tinned copper conductor, C22.2 No. 96-09 sec 5.3.3 table 4ACable Assembly: Three power conductors, ground check and two non-insulated grounding conductors cabled together to form a round cable coreSeparator: Single faced rubber-filled binder tape applied over coreJacket: Black, extra heavy duty, high torsion-resistant, integral-filled, reinforced Neoprene thermoset jacket, C22.2 No. 96-09 sec 5.3.9 table 2 & 5

Conductors: Flexible strand tin copper, ASTM B-172 and ICEA S-75-381NEMA WC58Separator: Tape separator between the conductor and insulationInsulation: Ethylene-propylene rubber (EPR), ICEA S-75-381 sec 3.15, table 3-8Assembly: Conductors and rubber fillers cabled to form round coreReinforcement: Single faced rubber filled binder tape over insulationJacket: Black heavy duty CPE thermoset compound, ICEA S-75-381 sec 3.4, table 3-4Color Code: ICEA S-75-381 sec 3.18; black, white

Conductors: Flexible strand tin copper, ASTM B-172Separator: Tape separator between conductor and insulationInsulation: Ethylene-propylene rubber (EPR), C22.2 No. 96-03, sec 5.1.4Assembly: Conductors and rubber fillers cabled to form round coreReinforcement: Nylon open braid applied overallJacket: Black heavy duty CPE thermoset compound, C22.2 No. 96-03, sec 5.1.11.2 sec. 4.3.9.2 table 1Color Code: black, blue, red, green C22.2 No. 96-03 table 1

Conductors: Flexible strand tin copper, ASTM B 172 and C22.2 No. 96-03 table 9Separator: Tape separator between conductor and insulation C22.2 No. 96-03 sec 4.3.4 table 4Insulation: Ethylene-propylene rubber (EPR), C22.2 No. 96-03 table 11Grounding cond: Tin copper, C22.2 No. 96-03 sec 5.1.4.3 and 5.1.4.4Ground check: Yellow polypropylene-insulated tin copper conductor, C22.2 No. 96-03 sec 5.1.4Assembly: Sizes 40 and smaller: Three power, ground check and two polyester (green mylar) taped grounding conductors cabled together;Sizes 250 MCM and larger: Three power, ground check and two polyester (green mylar) taped grounding conductors cabledtogether to form round core; Single faced rubber filled binder tape applied overallReinforcement: Nylon open braid applied overallJacket: Black extra heavy duty, integral-filled CPE thermoset compound, C22.2 No. 96-03 sec 5.1.11.2 and 4.3.9.2 table 5Color Code: black, blue, red; C22.2 No. 96-03 table 1

Conductors: Flexible strand tinned copper, ASTM B 172 and ASTM B33, C22.2 No. 96-09 sec 5.3.1 table 3Conductor Shield: Extruded semi-conducting layer over conductor. C22.2 No. 96-09Insulation: Ethylene-propylene rubber (EPR) C22.2 No. 96-09 sec 5.3.4 table 2 & 4Insulation Shield: Semi-conducting bedding tape and composite tinned copperpolyamide braid 60% minimum coverageColor Code: Polyamide braid color code - black, red, blue C22.2 No. 96-09 table 1Grounding Cond: Tinned copper - C22.2 No. 96-09 sec 5.3.2Ground Check: Yellow polypropylene-insulated tinned copper conductor, C22.2 No. 96-09 sec 5.3.3 table 4ACable Assembly: Three power conductors, ground check and two non-insulated grounding conductors cabled together to form a round cable coreSeparator: Single faced rubber-filled binder tape applied over coreJacket: Black, extra heavy duty, high torsion-resistant, integral-filled, reinforced Neoprene thermoset jacket, C22.2 No. 96-09 sec 5.3.9 table 2 & 5

Nominal voltage: RHHRHW-2 600V and 2000V, RW-90 CSA, 1kV, DLO 2kVConductors: Flexible strand tin coated copper conductor, B-172, ASTM B-33Separator: Tape separator between conductor and insulationInsulation: Ethylene-propylene rubber (EPR), UL, CSA, ICEA, AAR RP-588, 90CJacket: Black heavy duty, thermoset CPE, ICEA S-95-658 NEMA WC70, AAR RP-586Bending radius: For fixed minimum 4xD, for flexible minimum 6xD, D diameter of cable

Conductors: Flexible strand tin copper, Class I UL44 and ASTM B 33Insulation: Ethylene-propylene rubber (EPR)Grounding conductors: Tin copper, insulation color: greenGround check: Yellow polypropylene-insulated tin copper conductorAssembly: Three power, ground check and two EPR insulated grounding conductors cabled together to form round coreSeparator: Single faced rubber filled binder tape applied overallJacket: Black heavy duty, integral-filled CPE thermoset compoundColor Code: table 3-4; Black, white, red

Conductors: Flexible strand tin coated copper, ASTM B-172 and ICEA S-75-381Separator: Synthetic semi-conducting tape separator between the conductor and insulationInsulation: Ethylene-propylene rubber (EPR), UL 1072Jacket: Red heavy duty CPE thermoset compound, ICEA S-75-381 sec 3.22

Portable Power CableConductors: Extra flexible strand bare copperSeparator: Tape separator between conductor and insulationInsulation: Ethylene-propylene rubber (EPR)Reinforcement: Single faced rubber filled binder tape over insulationJacket: Black heavy duty CPE thermoset compound

Conductors: Flexible strand tinned copper, ASTM B 172 and ASTM B33, C22.2 No. 96-09 sec 6.1.2 table 9Separator: Polyester tape between conductor and insulationInsulation: Ethylene-propylene rubber (EPR) C22.2 No. 96-09 sec 5.3.4 table 2 & 4Insulation Shield: Non-conducting bedding tape and composite tinned copperpolyamide braid 60% minimum coverageColor Code: Polyamide braid color code - black, red, blue C22.2 No. 96-09 table 1Grounding Cond: Tinned copper - C22.2 No. 96-09 sec 5.3.2Ground Check: Yellow polypropylene-insulated tinned copper conductor, C22.2 No. 96-09 sec 5.3.3 table 4ACable Assembly: Three power conductors, ground check and two non-insulated grounding conductors cabled together to form a round cable coreSeparator: Nylon open braid applied overallJacket: Black, extra heavy duty, high torsion-resistant, integral-filled, reinforced Neoprene thermoset jacket, C22.2 No. 96-09 sec 5.3.9 table 2 & 5