TIANJIN HSXY CO.,LTD.

TianJin, United Arab Emirates

microcrystalline wax
item unit specificationmelting point c 72-82oil content % wt max.10color - max.l3specific gravity at 70c g/cm 0.8-0.87viscosity at 100c cps 10-20packing kgsmall carton 22

Microcrystalline Wax

Properties Unit Specification
Melting point 69-74
Oil content % wt Max.20
Color - Max.L5
Proportion 70, kg/l 0.82-0.88
Flash point Min.240
Viscosity cSt 18-23
Packaging Kg(small mouth old barrel) 175

Microcrystalline Wax

Properties Unit Specification
Melting Point 65.5-76.6
Oil content % wt Max.10
Penetration 25 , 100g, 5sec Max.100
Color - Max.L1
Proportion 15/4 0.82-0.84
Flash point Min.200
Viscosity cSt 7-15
Packaging Kg (bag) 25

microcrystalline wax

item unit specification
melting point c 78-83
oil content % wt max.10
color - max.l4
specific gravity at 70c g/cm 0.6-0.9
flash point c min.250
viscosity at 100c cps 15-20
packing kgsmall carton 25

.

microcrystalline wax

item unit specification
melting point c 89-91
oil content % wt max.3
color - max.l2
penetration at 25c 0.1mm 35-40
flash point c min.200
viscosity at 120c cps 13-20
packing kgsmall carton 25

.

hsft-105g take the place of shell sx105 and sasolwax h1

features:high melting point, low penetration, low viscosity

applications:printing ink and coating, applied in hot melt adhesives short setting time, bitumen modification, pvc and rubber processing

hsft-105ghas a higher melting point and the lower penetration. Hsft-105gis suitable to be used in road marking paints. Presently, the thermoplastic trafficmarking paint is the most widely usedon theroadsas the autonomous vehicle guidance. It is generally composed of thermoplastic resin, pigments, and fillers.the addition ofhsft-105gcan improve the dispersibility of pigment and filler in thermoplastic resin, and improve paint fluidity, prevent sedimentation, adjust viscosity, improved wear and stain resistance.

Powder Paraffin Wax

Properties Test Method Specification
Drop point ASTMD3954-94 49-52
Viscosity, mm2/s@100 ASTM D445 2.9-3.2
Penetration, 0.1mm/100g
5s at 25 ASTM D1321 44
Oil content ASTM D721 8-10
Size, 16mesh GB/T 6005 90%

PACKING :25 KG Valve bag / 980KG Jumbo bag

fischer tropsch wax HSFT-105B

Features:High melting point, Low Viscosity

Applications:In PVC processing as the lubricants, Master batches, Rubber industries, Polishes

In PVC processing. Fischer-Tropsch synthetic wax is mainly used as an external lubricant.It hasthe relative molecular mass of 500-1000. Since, compared to PE wax, Fischer-Tropsch wax has a low molecular weight, low melt viscosity, high melting point, and narrow melting range, the same lubrication effect can be achieved with less dosageand reduce the negative impact of lubricant on the physical and mechanical properties of the PVC products. On adjustment of internal and external lubrication, it has the irreplaceable advantage than PE wax.

properties test method specification
drop point astmd3954-94(2004) 107
viscosity, mm2/s@120 astm d445-2009 11.3
viscosity, cps@140 brookfield 6.7
penetration, 0.1mm/100g, 5s @25 astm d1321-2010 3.8
oil content astm d721-2006 3.2%
size , 40mesh gb/t 6005-2008 92%

packing :25 kg valve bag / 980kg jumbo bag

.

oxidized high density homo polyethylene wax

property test standard typical value
mettler drop point astm d3954 128c
density astm d1505 0.99 g/cc
hardness astm d-5

oxidized high density homo polyethylene wax

property test standard typical value
mettler drop point astm d3954 130c
density astm d1505 0.99 g/cc
hardness astm d-5

oxidized high density homo polyethylene wax

property test standard typical value
mettler drop point astm d3954 128c
density astm d1505 0.99 g/cc
hardness astm d-5

Oxidized High Density Homo polyethylene Wax

property Test Standard Typical Value
Mettler Drop Point ASTM D3954 128C
Density ASTM D1505 0.99 g/cc
Hardness ASTM D-5

Microcrystalline Wax

Properties Unit Specification
Melting Point 76.6-85
Oil content % wt Max.5
Penetration 25 , 100g, 5sec Max.100
Color - Max.L1
Proportion 15/4 0.84-0.87
Flash point Min.200
Viscosity cSt 15-23
Packaging Kg (bag) 25

Microcrystalline Wax

Properties Unit Specification
Congealing point 70-80
oil content % wt Max.10
Color - Max.L1.5
proportion of @ 15 Kg/L 0.6-0.9
Flash point (COC) Min.200
Viscosity @ 100 cSt 15-20
packaging Kg (bags) 30

wax for wood

properties test method specification
drop point astmd3954-94(2004) 76-86
viscosity, mm2/s @100 astm d445-2009 5-7
penetration, 0.1mm/100g, 5s @25 astm d1321-2010 15-25
oil content astm d721-2006 2-5%
size, 16mesh gb/t 6005-2008 70%

packing :25 kg valve bag / 980kg jumbo bag

powder paraffin wax

properties test method specification
melting point astmd3954-94 73.1
viscosity, mm2/s@100 astm d445 7.0
size, 16mesh gb/t 6005 95%

packing :25 kg valve bag / 980kg jumbo bag

hsft-70 take the place of shell sx70 and honeywell rl-165

features:narrow molecular weight distribution, fine crystal structure, linear molecular structure, low viscosity, white color, low penetration

applications:hot melt adhesives, paints and coatings, pvc and rubber processing, toners & inks, fertilizer release controller

properties unit specification
melting point 70-74
viscosity mm2/s@@100 6.9
drop point 80
penetration 0.1mm/100g
5s at25 12.4
oil content % wt 0.5-1.5

packing :25 kg valve bag / 980kg jumbo bag

.

oxidized low density homo polyethylene wax

property test standard typical value
mettler drop point astm d3954 102c
density astm d1505 0.93 g/cc
hardness astm d-5 5 dmm
acid no. Mgkoh/g 12
viscosity @ 150c brookfield 5000
particle size astm d6913-2004 20 mesh