Post Buy Requirement
Vigor Me Fzc
Sharjah, United Arab Emirates
Verified Add Review

Oil And Lubricants #3523119

Base Oil

  • Type Liquid Type
  • Application Automotive And Industrial
  • Brand Name VMF
  • Application Cosmetic And Industrial Grade

Almost every lubricant used in plants today started off as just a base oil. The American Petroleum Institute (API) has categorized base oils into five categories (API 1509, Appendix E). The first three groups are refined from petroleum crude oil. Group IV base oils are full synthetic (polyalphaolefin) oils. Group V is for all other base oils not included in Groups I through IV. Before all the additives are added to the mixture, lubricating oils begin as one or more of these five API groups.

GROUP I

Group I base oils are classified as less than 90 percent saturates, greater than 0.03 percent sulfur and with a viscosity-index range of 80 to 120. The temperature range for these oils is from 32 to 150 degrees F. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.

Additional Information:

Payment Terms : L/C, T/T

Specification Group 1

 

SN 65 SN 70 SN 150 SN 500 BS 150
SL.NO Parameter Method Unit Result Result Result Result Result
1 Flash point ASTM D92 °C Min 170 Min 174 Min 200 250 Min 250
2 Pour point ASTM D97 °C Max - 6 Max - 6 Max - 3 -3 Max - 3
3 Density at 15 °C ASTM D1298 Kg/l 0.85 0.85 0.878 0.8947 0.901
4 Viscosity @40°C ASTM D445 cSt Min 8 Min 8.5 Min 29.4 110 Min 450
5 Viscosity @100°C ASTM D445 cSt Min 2.28 Min 2.3 Min 5 11.73 29.5
6 Viscosity Index ASTM D2270 - Min 90 Min 90 Min 92 94 Min 90
7 Color ASTM D1500 - Max 0.5 Max 1.0 Max 2 L 2.5 Max 4
8 Odor Organoleptic - - - - No Foul smell -
9 Appearance Visual - Clear & Bright Clear & Bright Clear & Bright Clear & Bright Clear & Bright

Specification Group 2

Parameter Method Unit Result Result Result
Flash point ASTM D92 oC Min 200 Min 242 Min 245
Pour point ASTM D97 oC -3 Max -12 Max - 12
Density at 15 oC ASTM D1298 Kg/l 0.878 0.87 0.87
Viscosity @40oC ASTM D445 cSt Min 29.4 Min 110 Min 110.5
Viscosity @100oC ASTM D445 cSt Min 5 Min 11 Min 11.6
Viscosity Index ASTM D2270 - Min 92 Min 95 Min 95
Color ASTM D1500 - Max 2.0 L 0.5 L 0.5
Odor Organoleptic - - - -
Appearance Visual - Clear & Bright Clear & Bright Clear & Bright

Specification Group 3

Parameter Method N 100 N 150 N 250
Flash point ASTM D92 224 238 248
Pour point ASTM D97 -15 -12 -12
Density at 15oC ASTM D1298 0.8344 0.8425 0.8454
Viscosity @40oC ASTM D445 19.39 34.96 44.81
Viscosity @100oC ASTM D445 4.23 6.315 7.409
Viscosity Index ASTM D2270 125 132 130
ASTM Color ASTM D1500 L0.5 L0.5 L0.5
Odor Ol Factor Marketable Marketable Marketable
View Complete Details

Rubber Processing Oil

32,760 /390 Metric Ton Get Latest Price
  • Min. Order (MOQ) 100 Metric Ton
  • Type Liquid Type
  • Brand Name VMF
  • Other Names FURFURAL EXTRACT
  • Application RUBBER INDUSTRY, LUBE INDUSTRY AND PAINT INDUSTRY
  • Packaging Type DRUMS AS WELL AS FLEXI BAG
  • Place of Origin MIDDLE EAST

Our Rubber Processing Oil products are of great quality and are Developed taking in to consideration the usage and product requirement.Rubber Processing Oils are used during the mixture of rubber compounds. Rubber can be synthetic or natural and are used in the manufacturing of rubber products ranging from small rubber bands to huge vehicle tires.
Depending on the physical arrangement of the carbons atoms, Rubber processing oil are broadly classified in to three major groups namely;Paraffinic: these are used extensively in EPDM, Butyl rubbers.Naphthenic: Ideal for moulded articles, slippers, LPG tubes, floor tiles, etc. Aromatics: Mostly used to manufacture Tires, calendared and moulded sheets, Tread rubber etc

USES / APPLICATIONS
  • Used during the process of manufactruring rubber products such as automobile tiers, rubber shock absorbers, footwear, industrial hoses, wire and cable coverings, flooring materials and carrier fluid or solvent in manufacture of adhesives, sealants, polishes and carbon black
  • To improve physical properties of vulcanization to reduce the cost of finished rubber compounds
  • Tyre, Rubber and Dhoop Industry.
  • Used as a Lubricant in Rubber Processing.
  • Used in manufacturing of White Oil. Used as a component in Ink Production.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Flexi Bags, New Drums, Reconditioned Drums

Delivery Time : 14 DAYS FROM TEH DATE PF ADVANCE

Specification

 

TEST METHOD UNIT RMG SPEC ISO 8217 - 10 RESULT
Ash Content ASTM D482 - 07 % m Max 0.100 0.007
Pour Point ASTM D87 - 11 °C Max 30 -3
Carbon Residue ASTM D180 -06 %m Max 18.0 2.73
Flash Point ASTM D93-12 °C Min 60 142
Density @ 15°C ASTM D4052 - 11 kg/l Max 0.991 0.9895
Sulphur Content ASTM D4294 - 10 %m   3.54
Viscosity,Kinematic @ 50°C ASTM D445-12 mm2/s Max 380 254.9
Water Content ASTM D95-05 % vol Max 0.50 0.10
Total Sediment Potential IP 390 A %m Max 0.100 0.05
Aluminum + Silicon IP 470 mg/kg Max 60 <5
Sodium IP 470 mg/kg Max 100 2
Vanadium IP 470 mg/kg Max 350 3
Phosphorus IP 470 mg/kg Max 15 75
Zinc IP 470 mg/kg Max 15 9
Calcium IP 470 mg/kg Max 30 4
TEST METHOD UNIT RMG SPEC ISO 8217 - 10 RESULT
Ash Content ASTM D482 - 07 % m Max 0.100 0.005
Pour Point ASTM D87 - 11 °C Max 30 -21
Carbon Residue ASTM D180 -06 %m Max 18.0 3.39
Flash Point ASTM D93-12 °C Min 60 222
Density @ 15°C ASTM D4052 - 11 kg/l Max 0.991 1.028
Sulphur Content ASTM D4294 - 10 %m   4.42
Viscosity,Kinematic @ 50°C ASTM D445-12 mm2/s Max 380 1651
Water Content ASTM D95-05 % vol Max 0.50 0.15
Total Sediment Potential IP 390 A %m Max 0.100 0.02
Aluminum + Silicon IP 470 mg/kg Max 60 <5
Sodium IP 470 mg/kg Max 100 40
Vanadium IP 470 mg/kg Max 350 3
Phosphorus IP 470 mg/kg Max 15 <1
Zinc IP 470 mg/kg Max 15 <1
Calcium IP 470 mg/kg Max 30 <1
View Complete Details

EP 2 GREASE

PRODUCT DESCRIPTION

EP 2 GREASE is first generation Lithium soap base grease containing extreme pressure [EP] additives for enhanced load bearing capacity. These greases are formulated with high quality paraffinic base oils and are fortified with balanced oxidation and rust inhibitors, as also EP additives. EP 2 GREASE possesses excellent shear stability under heavy duty service. EP 2 GREASE has excellent water tolerance and is adaptable to normal grease dispensing systems including centralised lubrication systems.

TYPICAL APPLICATIONS

EP 2 GREASE is designed as multifunctional extreme pressure greases for prevention of wear, during usage at temperatures upto 130C. EP 2 GREASE can be used in plain and anti-friction bearings operating under high load conditions in various heavy duty industrial applications, steel mills, paper mills, heavy structural construction/fabrication industries, mining and automotive industries. EP 2 GREASE is also recommended for use in flexible type gear couplings.

AVAILABILITY

EP 2 GREASE is available in all types of packing.

REMARKS : THE GREASE IS DULY FORTIFIED WITH
  • - Anti-Oxidant Additive.
  • - Anti-Rust / Corrosion Additive.
  • - Performance Additives to enhance the life & performance of the grease.
  • - Eco-friendly Lead Free Extreme Pressure Additives

TEST METHOD CONTROL LIMITS TYPICAL RESULTS
    Min Max  
NLGI Grade   2
Thickener Type   Lithium
Color   As per requirement
Texture Adhesive   Smooth
Penetration @ 25°C        
Worked, 60 strokes ASTM D-217 265 295 280
Worked, 10,000 strokes ASTM D-217 265 290 285
Dropping Point, °C ASTM D-2265 180 - 200°C
Timken EP Test, OK Load, Kg ASTM D-2509 18 - 20
Weld Load, kg IP 239 200 - 220
Water Washout Test, % wt. Loss @ 80°C ASTM D-1264 - 10 5
Oxidation Stability, 100 hr. psi loss @ 100°C ASTM D-942 - 8 5
Rust Prevention ASTM D-1743 - - Pass
Copper Strip corrosion ASTM D 4048 - 1B 1A
Wheel Bearing Leakage, gm ASTM D-4290 - 10 1.5
Base Oil Properties        
Viscosity: @ 40°C, Cst ASTM D-445 100 120 120
Viscosity: @ 100°C, Cst ASTM D-445 12 - >13
View Complete Details

Base Oil Sn 500

  • Min. Order (MOQ) 50 Ton
  • LIGHT YELLOW 2 COLOR
Group I base oils are classified as less than 90 percent saturates, greater than 0.03 percent sulfur and with a viscosity-index range of 80 to 120. The temperature range for these oils is from 32 to 150 degrees F. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : drums, flexi and bulk vessels

Delivery Time : 14 Days From the Date of Advance

View Complete Details

VIGOR GRAPHITE GREASE

VIGOR Graphite Greaseis a quality, smooth, lithium soap based grease and fortified with the best known natural solid lubricant, graphite. Manufactured to NLGI 2 consistency, the grease provides the best combination of performance and economy for most applications. VIGOR Graphite Grease are resistant to water and have good mechanical stability.
The use of this grease will minimize wear through the use of the solid lubricant (graphite) and provide extended lubricant coverage due to even distribution of the product along the wearing parts. This also reduces the noise of the metal-joints by minimizing metal to metal contacts. It pumps ovr a wide temperature range and resists water washing.

TYPICAL APPLICATIONS

VIGOR Graphite Greaseis recommended for use in gears, cams and slides operating at temperatures ambient to 140C. This grease is recommended for use in hydraulic rams, plungers, slides, elevator cables, leaf springs, life guides, pantograph pans etc. These grease are also recommended for flexible couplings in various industrial applications where incidental water contact is high. The grease conforms to IS:508 (1987).

REMARKS :THE GREASE IS DULY FORTIFIED WITH
  • - Anti-Oxidant Additive.
  • - Anti-Rust / Corrosion Additive.
  • - Performance Additives to enhance the life & performance of the grease.

SPECIFICATION – GRAPHITE GREASE NLGI-2
S.NO. TEST METHOD CONTROL LIMIT TYPICAL RESULTS
MIN MAX
1 NLGI Grade   2
2 Thickener Type   Lithium
3 Color   Amber/ Black
4 Texture Adhesive   Smooth
5 Penetration @ 25°C        
6 Worked, 60 strokes ASTM D-217 265 295 280
7 Worked, 10,000 strokes ASTM D-217 265 295 284
8 Dropping Point, °C ASTM D-2265 180° - >196°
9 Timken EP Test, OK Load, Kg ASTM D-2509 10 - 12
10 Weld Load, kg   140 - 150
11 Load Wear Index (Kg)   28 - 30
12 Four Ball Wear Test, scar diameter, mm ASTM D-2266 - 0.6 0.55
13 Water Washout Test, % wt. Loss @ 80°C ASTM D-1264 - 12 5.5
14 Oxidation Stability, 100 hr. psi loss @ 100°C ASTM D-942 - 10 5
15 Rust Prevention ASTM D-1743 - - Pass
16 Copper Strip corrosion ASTM D 4048 - 1B 0
17 Wheel Bearing Leakage, gm ASTM D-4290 - - 1.6
18 Base Oil Properties - - - -
19 Viscosity: @ 40°C, cSt ASTM D-445 100 120 115
20 Viscosity: @ 100°C, cSt ASTM D-445 10 - >11
View Complete Details

SN 500 RE Refined Base Oil

  • Min. Order (MOQ) 100 Metric Ton
  • LIGHT YELLOWISH MAX 2.5

The re-refined oil has gone through the same refining process as crude oil does to become virgin oil, it is as good of quality as virgin oil (and sometimes better). In addition, re-refined oil is more environmentally friendly than virgin oil. Re-refining waste oil uses 3x less energy than it takes to refine crude oil into virgin oil. Some oils, such as motor oils, can be refined many times over for maximum savings.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Flexi packing or drum packing

Delivery Time : 14 Days From the Date of Advance

View Complete Details

SN 150 RE Refined Base Oil

  • Min. Order (MOQ) 100 Metric Ton
  • LIGHT YELLOWISH 1.5-2

The re-refined oil has gone through the same refining process as crude oil does to become virgin oil, it is as good of quality as virgin oil (and sometimes better). In addition, re-refined oil is more environmentally friendly than virgin oil. Re-refining waste oil uses 3x less energy than it takes to refine crude oil into virgin oil. Some oils, such as motor oils, can be refined many times over for maximum savings.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : FLEXI AND DRUMS PACKING

Delivery Time : 14 Days From the Date of Advance

View Complete Details

MP 3 Grease

PRODUCT DESCRIPTION

MP 3 Greaseis made from high quality mineral oil thickened with lithium soap and fortified with functional additives to impart oxidation and corrosion resistance.MP 3conforms to IS : 7623 (1993) and IPSS-1-09-006 (97) specifications.

TYPICAL APPLICATIONS

MP 3 Greaseis recommended for multipurpose applications including high performance wheel bearings, chassis points, water pump bearings. They are pumpable and can be dispensed by any greasing system.MP 3 Greaseis recommended for all normal grease application areas.

REMARKS :THE GREASE IS DULY FORTIFIED WITH
  • - Anti-Oxidant Additive.
  • - Anti-Rust / Corrosion Additive.
  • - Performance Additives to enhance the life & performance of the grease

TECHNICAL SPECIFICATIONS OF MOLY GREASE
S.NO. TEST METHOD CONTROL LIMIT TYPICAL RESULTS
MIN MAX
1 NLGI Grade   2
2 Thickener Type   Lithium
3 Color   Amber/ Black
4 Texture Adhesive   Smooth & Shiny
5 Penetration @ 25°C        
6 Worked, 60 strokes ASTM D-217 220 250 240
7 Worked, 10,000 strokes ASTM D-217 220 250 242
8 Dropping Point, °C ASTM D-2265 180° - >196°
9 Timken EP Test, OK Load, Kg ASTM D-2509 10 - 15
10 Weld Load, kg   160 - 180
11 Load Wear Index (Kg)   25 - 30
12 Four Ball Wear Test, scar diameter, mm ASTM D-2266 - 0.6 0.5
13 Water Washout Test, % wt. Loss @ 80°C ASTM D-1264 - 10 5
14 Oxidation Stability, 100 hr. psi loss @ 100°C ASTM D-942 - 8 5
15 Rust Prevention ASTM D-1743 - - Pass
16 Copper Strip corrosion ASTM D 4048 - 1B 0
17 Wheel Bearing Leakage, gm ASTM D-4290 - 6 1.5
18 Base Oil Properties - - - -
19 Viscosity: @ 40°C, cSt ASTM D-445 90 100 100
20 Viscosity: @ 100°C, cSt ASTM D-445 10 - >11
View Complete Details

Base Oil BS 150

  • Min. Order (MOQ) 100 Ton
  • yellow less than 3 color
Group I base oils are classified as less than 90 percent saturates, greater than 0.03 percent sulfur and with a viscosity-index range of 80 to 120. The temperature range for these oils is from 32 to 150 degrees F. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : RECONDITIONED DRUMS, NEW DRUMS, FLEXI BAG AND BULK VESELS

Delivery Time : 14 Days From Teh Date of Advance

View Complete Details

MP 2 GREASE

PRODUCT DESCRIPTION

MP 2 Greaseis made from high quality mineral oil thickened with lithium soap and fortified with functional additives to impart oxidation and corrosion resistance.MP 2conforms to IS : 7623 (1993) and IPSS-1-09-006 (97) specifications.

TYPICAL APPLICATIONS

MP 2 Greaseis recommended for multipurpose applications including high performance wheel bearings, chassis points, and water pump bearings. They are pump able and can be dispensed by any greasing system.MP 2 Greaseis recommended for all normal grease application areas.

S.NO. TEST METHOD CONTROL LIMIT TYPICAL RESULTS
MIN MAX
1 NLGI Grade   2
2 Thickener Type   Lithium
3 Color   Amber/ Black
4 Texture Adhesive   Smooth
5 Penetration @ 25°C        
6 Worked, 60 strokes ASTM D-217 265 295 280
7 Worked, 10,000 strokes ASTM D-217 265 295 290
8 Dropping Point, °C ASTM D-2265 180° - >196°
9 Timken EP Test, OK Load, Kg ASTM D-2509 10 - 12
10 Weld Load, kg   140 - 150
11 Load Wear Index (Kg)   28 - 30
12 Four Ball Wear Test, scar diameter, mm ASTM D-2266 - 0.6 0.55
13 Water Washout Test, % wt. Loss @ 80°C ASTM D-1264 - 12 5.5
14 Oxidation Stability, 100 hr. psi loss @ 100°C ASTM D-942 - 10 5
15 Rust Prevention ASTM D-1743 - - Pass
16 Copper Strip corrosion ASTM D 4048 - 1B 0
17 Wheel Bearing Leakage, gm ASTM D-4290 - - 1.6
18 Base Oil Properties - - - -
19 Viscosity: @ 40°C, cSt ASTM D-445 90 105 100
20 Viscosity: @ 100°C, cSt ASTM D-445 10 - >11
View Complete Details

Base Oil Sn 150

  • Min. Order (MOQ) 100 Ton
  • yellow 1.5 color
Group I base oils are classified as less than 90 percent saturates, greater than 0.03 percent sulfur and with a viscosity-index range of 80 to 120. The temperature range for these oils is from 32 to 150 degrees F. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.

Additional Information:

Payment Terms : T/T

Packaging Details : DRUMS, FLEXI AND BULK

Delivery Time : 14 Days From Teh Date of Advance

View Complete Details

MOLY GREASES HEAVY DUTY EP GREASES WITH MOLYSULPHIDE

MOLY GREASESare solid lubricant containing multipurpose Lithium hydroxy stearate soap greases based on paraffinic mineral oils.MOLY GREASESalso contain antioxidants, anti corrosion and extreme pressure additives together with molybdenum disulfide for enhanced extreme pressure and anti-seize performance.MOLY GREASESexhibit good water resistance and excellent adherence to metal surfaces.

TYPICAL APPLICATIONS

MOLY GREASESare suitable for plain bearings and gears in wide variety of applications. These can also be used in slow speed rolling and angular contact bearings having adequate clearance to take care of solid particles.

MOLY GREASESare particularly recommended for use under boundary lubrication conditions, especially where sliding motion or vibrations can cause the grease to squeeze out from the surfaces in contact.MOLY GREASESprovide protection against fretting corrosion, typically associated with splined shafts, pivot pins, constant velocity joints, other ball joints and on parts subjected to oscillating and sliding motion.MOLY GREASESare generally recommended for all difficult service conditions such as dust, exposure to vapours and rains, recurrence of shock loads.

MOLY GREASEScan also be dispensed through centralised lubrication systems.

TECHNICAL SPECIFICATIONS OF MOLY GREASE
SL.NO CHARACTERISTICS MOLY GREASE TEST METHOD
1 Colour Grey Black  
2 Structure Smooth  
3 Soap type Lithium ASTM D-128
4 Base oil viscosity at 100oC, cSt 17-19 ASTM D-445
5 Base oil viscosity at 40oC cst 290 ASTM D-445
6 MoS2 % min. 3 ASTM D-128
7 Worked Penetration, 60/60 strokes at 25oC, mm-1 265-295 ASTM D-217
8 Drop Point, oC, min. 185 ASTM D-566
9 Copper Strip corrosion Pass ASTM D-4048
10 Timken OK load (lbs),min 50 ASTM D-2509
11 Four ball weld load, kgs. 250 ASTM D-2596
View Complete Details

Extreme Pressure Lithium Grease

21,000 /250 Barrel Get Latest Price
  • Min. Order (MOQ) 100 Metric Ton
  • Raw Material Base Oil And Lithium And Calcium
PRODUCT DESCRIPTION

EP 2 GREASE is first generation Lithium soap base grease containing extreme pressure [EP] additives for enhanced load bearing capacity. These greases are formulated with high quality paraffinic base oils and are fortified with balanced oxidation and rust inhibitors, as also EP additives. EP 2 GREASE possesses excellent shear stability under heavy duty service. EP 2 GREASE has excellent water tolerance and is adaptable to normal grease dispensing systems including centralised lubrication systems.

TYPICAL APPLICATIONS

EP 2 GREASE is designed as multifunctional extreme pressure greases for prevention of wear, during usage at temperatures upto 130C. EP 2 GREASE can be used in plain and anti-friction bearings operating under high load conditions in various heavy duty industrial applications, steel mills, paper mills, heavy structural construction/fabrication industries, mining and automotive industries. EP 2 GREASE is also recommended for use in flexible type gear couplings.

REMARKS : THE GREASE IS DULY FORTIFIED WITH
  • - Anti-Oxidant Additive.
  • - Anti-Rust / Corrosion Additive.
  • - Performance Additives to enhance the life & performance of the grease.
  • - Eco-friendly Lead Free Extreme Pressure Additives

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Tubes, Buckets, Drums and Plastic Bags

Delivery Time : 14 Days from The Date Of Advance

Specification

SPECIFICATION –LITHIUM EP NLGI-2
TEST METHOD CONTROL LIMITS TYPICAL RESULTS
    Min Max  
NLGI Grade   2
Thickener Type   Lithium
Color   As per requirement
Texture Adhesive   Smooth
Penetration @ 25°C        
Worked, 60 strokes ASTM D-217 265 295 280
Worked, 10,000 strokes ASTM D-217 265 290 285
Dropping Point, °C ASTM D-2265 180 - 200°C
Timken EP Test, OK Load, Kg ASTM D-2509 18 - 20
Weld Load, kg IP 239 200 - 220
Water Washout Test, % wt. Loss @ 80°C ASTM D-1264 - 10 5
Oxidation Stability, 100 hr. psi loss @ 100°C ASTM D-942 - 8 5
Rust Prevention ASTM D-1743 - - Pass
Copper Strip corrosion ASTM D 4048 - 1B 1A
Wheel Bearing Leakage, gm ASTM D-4290 - 10 1.5
Base Oil Properties        
Viscosity: @ 40°C, Cst ASTM D-445 100 120 120
Viscosity: @ 100°C, Cst ASTM D-445 12 - >13
View Complete Details

Base Oil N 500

75,600 /900 Metric Ton Get Latest Price
  • Min. Order (MOQ) 50 Ton
  • white less than .05
Group II base oils are defined as being more than 90 percent saturates, less than 0.03 percent sulfur and with a viscosity index of 80 to 120. They are often manufactured by hydrocracking, which is a more complex process than what is used for Group I base oils. Since all the hydrocarbon molecules of these oils are saturated, Group II base oils have better antioxidation properties. They also have a clearer color and cost more in comparison to Group I base oils. Still, Group II base oils are becoming very common on the market today and are priced very close to Group I oils.
View Complete Details

Base Oil Gr2 N 150

67,200 /800 Metric Ton Get Latest Price
  • Min. Order (MOQ) 50 Ton
  • water white or colorless less 0.05
Group II base oils are defined as being more than 90 percent saturates, less than 0.03 percent sulfur and with a viscosity index of 80 to 120. They are often manufactured by hydrocracking, which is a more complex process than what is used for Group I base oils. Since all the hydrocarbon molecules of these oils are saturated, Group II base oils have better antioxidation properties. They also have a clearer color and cost more in comparison to Group I base oils. Still, Group II base oils are becoming very common on the market today and are priced very close to Group I oils.
View Complete Details

EP 3 GREASE EXTREME PRESSURE LITHIUM GREASE

EP 3 GREASE is first generation Lithium soap base grease containing extreme pressure [EP] additives for enhanced load bearing capacity. These greases are formulated with high quality paraffinic base oils and are fortified with balanced oxidation and rust inhibitors, as also EP additives. EP 3 GREASE possesses excellent shear stability under heavy duty service. EP 3 GREASE has excellent water tolerance and is adaptable to normal grease dispensing systems including centralised lubrication systems.

TYPICAL APPLICATIONS

EP 3 GREASE is designed as multifunctional extreme pressure greases for prevention of wear, during usage at temperatures upto 130C. EP 3 GREASE can be used in plain and anti-friction bearings operating under high load conditions in various heavy duty industrial applications, steel mills, paper mills, heavy structural construction/fabrication industries, mining and automotive industries. EP 3 GREASE is also recommended for use in flexible type gear couplings.

REMARKS : THE GREASE IS DULY FORTIFIED WITH
  • - Anti-Oxidant Additive.
  • - Anti-Rust / Corrosion Additive.
  • - Performance Additives to enhance the life & performance of the grease.
  • - Eco-friendly Lead Free Extreme Pressure Additives

SPECIFICATION –LITHIUM EP NLGI-3
TEST METHOD CONTROL LIMITS TYPICAL RESULTS
    Min Max  
NLGI Grade   3
Thickener Type   Lithium Hydroxystearate
Color   Red
Texture Adhesive   Smooth & Homogeneous
Penetration @ 25°C        
Worked, 60 strokes ASTM D-217 220 250 240
Dropping Point, °C ASTM D-2265 190°C - >200°
Timken EP Test, OK Load, Kg ASTM D-2509 20 - 22
Weld Load, kg IP 239 200 - 220
Water Washout Test, % wt. Loss @ 80°C ASTM D-1264 - 10 4.5
Oxidation Stability, 100 hr. psi loss @ 100°C ASTM D-942 - 7 5
Rust Prevention ASTM D-1743 - - Pass
Copper Strip corrosion ASTM D 4048 - 1B 1A
Wheel Bearing Leakage, gm ASTM D-4290 - 5 1
Base Oil Properties        
Viscosity: @ 40°C, Cst ASTM D-445 100 120 119
Viscosity: @ 100°C, Cst ASTM D-445 12 - >13
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us