Sharjah, United Arab Emirates
Verified
Write a Review
Our Product / Services
Lubricants
2 Products availableCosmetics, Hair Care & Beauty Products
2 Products availablePET Granules & Plastic Raw Material
2 Products availablePVC, PP & Plastic Products
2 Products availableCoal & Charcoal
1 Products availableConstruction Aggregates
1 Products availableSoaps & Detergents
1 Products availableWe offer a complete product range of Base Oil, Rubber Processing Oil, EP 2 GREASE, Base Oil Sn 500 and VIGOR GRAPHITE GREASE
Almost every lubricant used in plants today started off as just a base oil. The American Petroleum Institute (API) has categorized base oils into five categories (API 1509, Appendix E). The first three groups are refined from petroleum crude oil. Group IV base oils are full synthetic (polyalphaolefin) oils. Group V is for all other base oils not included in Groups I through IV. Before all the additives are added to the mixture, lubricating oils begin as one or more of these five API groups.
Group I base oils are classified as less than 90 percent saturates, greater than 0.03 percent sulfur and with a viscosity-index range of 80 to 120. The temperature range for these oils is from 32 to 150 degrees F. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.
Additional Information:
Payment Terms : L/C, T/T
Specification Group 1
| SN 65 | SN 70 | SN 150 | SN 500 | BS 150 | ||||
|---|---|---|---|---|---|---|---|---|
| SL.NO | Parameter | Method | Unit | Result | Result | Result | Result | Result |
| 1 | Flash point | ASTM D92 | °C | Min 170 | Min 174 | Min 200 | 250 | Min 250 |
| 2 | Pour point | ASTM D97 | °C | Max - 6 | Max - 6 | Max - 3 | -3 | Max - 3 |
| 3 | Density at 15 °C | ASTM D1298 | Kg/l | 0.85 | 0.85 | 0.878 | 0.8947 | 0.901 |
| 4 | Viscosity @40°C | ASTM D445 | cSt | Min 8 | Min 8.5 | Min 29.4 | 110 | Min 450 |
| 5 | Viscosity @100°C | ASTM D445 | cSt | Min 2.28 | Min 2.3 | Min 5 | 11.73 | 29.5 |
| 6 | Viscosity Index | ASTM D2270 | - | Min 90 | Min 90 | Min 92 | 94 | Min 90 |
| 7 | Color | ASTM D1500 | - | Max 0.5 | Max 1.0 | Max 2 | L 2.5 | Max 4 |
| 8 | Odor | Organoleptic | - | - | - | - | No Foul smell | - |
| 9 | Appearance | Visual | - | Clear & Bright | Clear & Bright | Clear & Bright | Clear & Bright | Clear & Bright |
Specification Group 2
| Parameter | Method | Unit | Result | Result | Result |
|---|---|---|---|---|---|
| Flash point | ASTM D92 | oC | Min 200 | Min 242 | Min 245 |
| Pour point | ASTM D97 | oC | -3 | Max -12 | Max - 12 |
| Density at 15 oC | ASTM D1298 | Kg/l | 0.878 | 0.87 | 0.87 |
| Viscosity @40oC | ASTM D445 | cSt | Min 29.4 | Min 110 | Min 110.5 |
| Viscosity @100oC | ASTM D445 | cSt | Min 5 | Min 11 | Min 11.6 |
| Viscosity Index | ASTM D2270 | - | Min 92 | Min 95 | Min 95 |
| Color | ASTM D1500 | - | Max 2.0 | L 0.5 | L 0.5 |
| Odor | Organoleptic | - | - | - | - |
| Appearance | Visual | - | Clear & Bright | Clear & Bright | Clear & Bright |
Specification Group 3
| Parameter | Method | N 100 | N 150 | N 250 |
|---|---|---|---|---|
| Flash point | ASTM D92 | 224 | 238 | 248 |
| Pour point | ASTM D97 | -15 | -12 | -12 |
| Density at 15oC | ASTM D1298 | 0.8344 | 0.8425 | 0.8454 |
| Viscosity @40oC | ASTM D445 | 19.39 | 34.96 | 44.81 |
| Viscosity @100oC | ASTM D445 | 4.23 | 6.315 | 7.409 |
| Viscosity Index | ASTM D2270 | 125 | 132 | 130 |
| ASTM Color | ASTM D1500 | L0.5 | L0.5 | L0.5 |
| Odor | Ol Factor | Marketable | Marketable | Marketable |
Our Rubber Processing Oil products are of great quality and are Developed taking in to consideration the usage and product requirement.Rubber Processing Oils are used during the mixture of rubber compounds. Rubber can be synthetic or natural and are used in the manufacturing of rubber products ranging from small rubber bands to huge vehicle tires.
Depending on the physical arrangement of the carbons atoms, Rubber processing oil are broadly classified in to three major groups namely;Paraffinic: these are used extensively in EPDM, Butyl rubbers.Naphthenic: Ideal for moulded articles, slippers, LPG tubes, floor tiles, etc. Aromatics: Mostly used to manufacture Tires, calendared and moulded sheets, Tread rubber etc
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Flexi Bags, New Drums, Reconditioned Drums
Delivery Time : 14 DAYS FROM TEH DATE PF ADVANCE
Specification
| TEST | METHOD | UNIT | RMG SPEC ISO 8217 - 10 | RESULT |
|---|---|---|---|---|
| Ash Content | ASTM D482 - 07 | % m | Max 0.100 | 0.007 |
| Pour Point | ASTM D87 - 11 | °C | Max 30 | -3 |
| Carbon Residue | ASTM D180 -06 | %m | Max 18.0 | 2.73 |
| Flash Point | ASTM D93-12 | °C | Min 60 | 142 |
| Density @ 15°C | ASTM D4052 - 11 | kg/l | Max 0.991 | 0.9895 |
| Sulphur Content | ASTM D4294 - 10 | %m | 3.54 | |
| Viscosity,Kinematic @ 50°C | ASTM D445-12 | mm2/s | Max 380 | 254.9 |
| Water Content | ASTM D95-05 | % vol | Max 0.50 | 0.10 |
| Total Sediment Potential | IP 390 A | %m | Max 0.100 | 0.05 |
| Aluminum + Silicon | IP 470 | mg/kg | Max 60 | <5 |
| Sodium | IP 470 | mg/kg | Max 100 | 2 |
| Vanadium | IP 470 | mg/kg | Max 350 | 3 |
| Phosphorus | IP 470 | mg/kg | Max 15 | 75 |
| Zinc | IP 470 | mg/kg | Max 15 | 9 |
| Calcium | IP 470 | mg/kg | Max 30 | 4 |
| TEST | METHOD | UNIT | RMG SPEC ISO 8217 - 10 | RESULT |
|---|---|---|---|---|
| Ash Content | ASTM D482 - 07 | % m | Max 0.100 | 0.005 |
| Pour Point | ASTM D87 - 11 | °C | Max 30 | -21 |
| Carbon Residue | ASTM D180 -06 | %m | Max 18.0 | 3.39 |
| Flash Point | ASTM D93-12 | °C | Min 60 | 222 |
| Density @ 15°C | ASTM D4052 - 11 | kg/l | Max 0.991 | 1.028 |
| Sulphur Content | ASTM D4294 - 10 | %m | 4.42 | |
| Viscosity,Kinematic @ 50°C | ASTM D445-12 | mm2/s | Max 380 | 1651 |
| Water Content | ASTM D95-05 | % vol | Max 0.50 | 0.15 |
| Total Sediment Potential | IP 390 A | %m | Max 0.100 | 0.02 |
| Aluminum + Silicon | IP 470 | mg/kg | Max 60 | <5 |
| Sodium | IP 470 | mg/kg | Max 100 | 40 |
| Vanadium | IP 470 | mg/kg | Max 350 | 3 |
| Phosphorus | IP 470 | mg/kg | Max 15 | <1 |
| Zinc | IP 470 | mg/kg | Max 15 | <1 |
| Calcium | IP 470 | mg/kg | Max 30 | <1 |
EP 2 GREASE is first generation Lithium soap base grease containing extreme pressure [EP] additives for enhanced load bearing capacity. These greases are formulated with high quality paraffinic base oils and are fortified with balanced oxidation and rust inhibitors, as also EP additives. EP 2 GREASE possesses excellent shear stability under heavy duty service. EP 2 GREASE has excellent water tolerance and is adaptable to normal grease dispensing systems including centralised lubrication systems.
EP 2 GREASE is designed as multifunctional extreme pressure greases for prevention of wear, during usage at temperatures upto 130C. EP 2 GREASE can be used in plain and anti-friction bearings operating under high load conditions in various heavy duty industrial applications, steel mills, paper mills, heavy structural construction/fabrication industries, mining and automotive industries. EP 2 GREASE is also recommended for use in flexible type gear couplings.
EP 2 GREASE is available in all types of packing.
REMARKS : THE GREASE IS DULY FORTIFIED WITH
| TEST | METHOD | CONTROL LIMITS | TYPICAL RESULTS | |
|---|---|---|---|---|
| Min | Max | |||
| NLGI Grade | 2 | |||
| Thickener Type | Lithium | |||
| Color | As per requirement | |||
| Texture Adhesive | Smooth | |||
| Penetration @ 25°C | ||||
| Worked, 60 strokes | ASTM D-217 | 265 | 295 | 280 |
| Worked, 10,000 strokes | ASTM D-217 | 265 | 290 | 285 |
| Dropping Point, °C | ASTM D-2265 | 180 | - | 200°C |
| Timken EP Test, OK Load, Kg | ASTM D-2509 | 18 | - | 20 |
| Weld Load, kg | IP 239 | 200 | - | 220 |
| Water Washout Test, % wt. Loss @ 80°C | ASTM D-1264 | - | 10 | 5 |
| Oxidation Stability, 100 hr. psi loss @ 100°C | ASTM D-942 | - | 8 | 5 |
| Rust Prevention | ASTM D-1743 | - | - | Pass |
| Copper Strip corrosion | ASTM D 4048 | - | 1B | 1A |
| Wheel Bearing Leakage, gm | ASTM D-4290 | - | 10 | 1.5 |
| Base Oil Properties | ||||
| Viscosity: @ 40°C, Cst | ASTM D-445 | 100 | 120 | 120 |
| Viscosity: @ 100°C, Cst | ASTM D-445 | 12 | - | >13 |
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : drums, flexi and bulk vessels
Delivery Time : 14 Days From the Date of Advance
VIGOR Graphite Greaseis a quality, smooth, lithium soap based grease and fortified with the best known natural solid lubricant, graphite. Manufactured to NLGI 2 consistency, the grease provides the best combination of performance and economy for most applications. VIGOR Graphite Grease are resistant to water and have good mechanical stability.
The use of this grease will minimize wear through the use of the solid lubricant (graphite) and provide extended lubricant coverage due to even distribution of the product along the wearing parts. This also reduces the noise of the metal-joints by minimizing metal to metal contacts. It pumps ovr a wide temperature range and resists water washing.
VIGOR Graphite Greaseis recommended for use in gears, cams and slides operating at temperatures ambient to 140C. This grease is recommended for use in hydraulic rams, plungers, slides, elevator cables, leaf springs, life guides, pantograph pans etc. These grease are also recommended for flexible couplings in various industrial applications where incidental water contact is high. The grease conforms to IS:508 (1987).
REMARKS :THE GREASE IS DULY FORTIFIED WITH
| S.NO. | TEST | METHOD | CONTROL LIMIT | TYPICAL RESULTS | |
|---|---|---|---|---|---|
| MIN | MAX | ||||
| 1 | NLGI Grade | 2 | |||
| 2 | Thickener Type | Lithium | |||
| 3 | Color | Amber/ Black | |||
| 4 | Texture Adhesive | Smooth | |||
| 5 | Penetration @ 25°C | ||||
| 6 | Worked, 60 strokes | ASTM D-217 | 265 | 295 | 280 |
| 7 | Worked, 10,000 strokes | ASTM D-217 | 265 | 295 | 284 |
| 8 | Dropping Point, °C | ASTM D-2265 | 180° | - | >196° |
| 9 | Timken EP Test, OK Load, Kg | ASTM D-2509 | 10 | - | 12 |
| 10 | Weld Load, kg | 140 | - | 150 | |
| 11 | Load Wear Index (Kg) | 28 | - | 30 | |
| 12 | Four Ball Wear Test, scar diameter, mm | ASTM D-2266 | - | 0.6 | 0.55 |
| 13 | Water Washout Test, % wt. Loss @ 80°C | ASTM D-1264 | - | 12 | 5.5 |
| 14 | Oxidation Stability, 100 hr. psi loss @ 100°C | ASTM D-942 | - | 10 | 5 |
| 15 | Rust Prevention | ASTM D-1743 | - | - | Pass |
| 16 | Copper Strip corrosion | ASTM D 4048 | - | 1B | 0 |
| 17 | Wheel Bearing Leakage, gm | ASTM D-4290 | - | - | 1.6 |
| 18 | Base Oil Properties | - | - | - | - |
| 19 | Viscosity: @ 40°C, cSt | ASTM D-445 | 100 | 120 | 115 |
| 20 | Viscosity: @ 100°C, cSt | ASTM D-445 | 10 | - | >11 |
The re-refined oil has gone through the same refining process as crude oil does to become virgin oil, it is as good of quality as virgin oil (and sometimes better). In addition, re-refined oil is more environmentally friendly than virgin oil. Re-refining waste oil uses 3x less energy than it takes to refine crude oil into virgin oil. Some oils, such as motor oils, can be refined many times over for maximum savings.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Flexi packing or drum packing
Delivery Time : 14 Days From the Date of Advance
The re-refined oil has gone through the same refining process as crude oil does to become virgin oil, it is as good of quality as virgin oil (and sometimes better). In addition, re-refined oil is more environmentally friendly than virgin oil. Re-refining waste oil uses 3x less energy than it takes to refine crude oil into virgin oil. Some oils, such as motor oils, can be refined many times over for maximum savings.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : FLEXI AND DRUMS PACKING
Delivery Time : 14 Days From the Date of Advance
MP 3 Greaseis made from high quality mineral oil thickened with lithium soap and fortified with functional additives to impart oxidation and corrosion resistance.MP 3conforms to IS : 7623 (1993) and IPSS-1-09-006 (97) specifications.
MP 3 Greaseis recommended for multipurpose applications including high performance wheel bearings, chassis points, water pump bearings. They are pumpable and can be dispensed by any greasing system.MP 3 Greaseis recommended for all normal grease application areas.
REMARKS :THE GREASE IS DULY FORTIFIED WITH
| S.NO. | TEST | METHOD | CONTROL LIMIT | TYPICAL RESULTS | |
|---|---|---|---|---|---|
| MIN | MAX | ||||
| 1 | NLGI Grade | 2 | |||
| 2 | Thickener Type | Lithium | |||
| 3 | Color | Amber/ Black | |||
| 4 | Texture Adhesive | Smooth & Shiny | |||
| 5 | Penetration @ 25°C | ||||
| 6 | Worked, 60 strokes | ASTM D-217 | 220 | 250 | 240 |
| 7 | Worked, 10,000 strokes | ASTM D-217 | 220 | 250 | 242 |
| 8 | Dropping Point, °C | ASTM D-2265 | 180° | - | >196° |
| 9 | Timken EP Test, OK Load, Kg | ASTM D-2509 | 10 | - | 15 |
| 10 | Weld Load, kg | 160 | - | 180 | |
| 11 | Load Wear Index (Kg) | 25 | - | 30 | |
| 12 | Four Ball Wear Test, scar diameter, mm | ASTM D-2266 | - | 0.6 | 0.5 |
| 13 | Water Washout Test, % wt. Loss @ 80°C | ASTM D-1264 | - | 10 | 5 |
| 14 | Oxidation Stability, 100 hr. psi loss @ 100°C | ASTM D-942 | - | 8 | 5 |
| 15 | Rust Prevention | ASTM D-1743 | - | - | Pass |
| 16 | Copper Strip corrosion | ASTM D 4048 | - | 1B | 0 |
| 17 | Wheel Bearing Leakage, gm | ASTM D-4290 | - | 6 | 1.5 |
| 18 | Base Oil Properties | - | - | - | - |
| 19 | Viscosity: @ 40°C, cSt | ASTM D-445 | 90 | 100 | 100 |
| 20 | Viscosity: @ 100°C, cSt | ASTM D-445 | 10 | - | >11 |
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : RECONDITIONED DRUMS, NEW DRUMS, FLEXI BAG AND BULK VESELS
Delivery Time : 14 Days From Teh Date of Advance
MP 2 Greaseis made from high quality mineral oil thickened with lithium soap and fortified with functional additives to impart oxidation and corrosion resistance.MP 2conforms to IS : 7623 (1993) and IPSS-1-09-006 (97) specifications.
MP 2 Greaseis recommended for multipurpose applications including high performance wheel bearings, chassis points, and water pump bearings. They are pump able and can be dispensed by any greasing system.MP 2 Greaseis recommended for all normal grease application areas.
| S.NO. | TEST | METHOD | CONTROL LIMIT | TYPICAL RESULTS | |
|---|---|---|---|---|---|
| MIN | MAX | ||||
| 1 | NLGI Grade | 2 | |||
| 2 | Thickener Type | Lithium | |||
| 3 | Color | Amber/ Black | |||
| 4 | Texture Adhesive | Smooth | |||
| 5 | Penetration @ 25°C | ||||
| 6 | Worked, 60 strokes | ASTM D-217 | 265 | 295 | 280 |
| 7 | Worked, 10,000 strokes | ASTM D-217 | 265 | 295 | 290 |
| 8 | Dropping Point, °C | ASTM D-2265 | 180° | - | >196° |
| 9 | Timken EP Test, OK Load, Kg | ASTM D-2509 | 10 | - | 12 |
| 10 | Weld Load, kg | 140 | - | 150 | |
| 11 | Load Wear Index (Kg) | 28 | - | 30 | |
| 12 | Four Ball Wear Test, scar diameter, mm | ASTM D-2266 | - | 0.6 | 0.55 |
| 13 | Water Washout Test, % wt. Loss @ 80°C | ASTM D-1264 | - | 12 | 5.5 |
| 14 | Oxidation Stability, 100 hr. psi loss @ 100°C | ASTM D-942 | - | 10 | 5 |
| 15 | Rust Prevention | ASTM D-1743 | - | - | Pass |
| 16 | Copper Strip corrosion | ASTM D 4048 | - | 1B | 0 |
| 17 | Wheel Bearing Leakage, gm | ASTM D-4290 | - | - | 1.6 |
| 18 | Base Oil Properties | - | - | - | - |
| 19 | Viscosity: @ 40°C, cSt | ASTM D-445 | 90 | 105 | 100 |
| 20 | Viscosity: @ 100°C, cSt | ASTM D-445 | 10 | - | >11 |
Additional Information:
Payment Terms : T/T
Packaging Details : DRUMS, FLEXI AND BULK
Delivery Time : 14 Days From Teh Date of Advance
MOLY GREASESare solid lubricant containing multipurpose Lithium hydroxy stearate soap greases based on paraffinic mineral oils.MOLY GREASESalso contain antioxidants, anti corrosion and extreme pressure additives together with molybdenum disulfide for enhanced extreme pressure and anti-seize performance.MOLY GREASESexhibit good water resistance and excellent adherence to metal surfaces.
MOLY GREASESare suitable for plain bearings and gears in wide variety of applications. These can also be used in slow speed rolling and angular contact bearings having adequate clearance to take care of solid particles.
MOLY GREASESare particularly recommended for use under boundary lubrication conditions, especially where sliding motion or vibrations can cause the grease to squeeze out from the surfaces in contact.MOLY GREASESprovide protection against fretting corrosion, typically associated with splined shafts, pivot pins, constant velocity joints, other ball joints and on parts subjected to oscillating and sliding motion.MOLY GREASESare generally recommended for all difficult service conditions such as dust, exposure to vapours and rains, recurrence of shock loads.
MOLY GREASEScan also be dispensed through centralised lubrication systems.
| SL.NO | CHARACTERISTICS | MOLY GREASE | TEST METHOD |
|---|---|---|---|
| 1 | Colour | Grey Black | |
| 2 | Structure | Smooth | |
| 3 | Soap type | Lithium | ASTM D-128 |
| 4 | Base oil viscosity at 100oC, cSt | 17-19 | ASTM D-445 |
| 5 | Base oil viscosity at 40oC cst | 290 | ASTM D-445 |
| 6 | MoS2 % min. | 3 | ASTM D-128 |
| 7 | Worked Penetration, 60/60 strokes at 25oC, mm-1 | 265-295 | ASTM D-217 |
| 8 | Drop Point, oC, min. | 185 | ASTM D-566 |
| 9 | Copper Strip corrosion | Pass | ASTM D-4048 |
| 10 | Timken OK load (lbs),min | 50 | ASTM D-2509 |
| 11 | Four ball weld load, kgs. | 250 | ASTM D-2596 |
EP 2 GREASE is first generation Lithium soap base grease containing extreme pressure [EP] additives for enhanced load bearing capacity. These greases are formulated with high quality paraffinic base oils and are fortified with balanced oxidation and rust inhibitors, as also EP additives. EP 2 GREASE possesses excellent shear stability under heavy duty service. EP 2 GREASE has excellent water tolerance and is adaptable to normal grease dispensing systems including centralised lubrication systems.
EP 2 GREASE is designed as multifunctional extreme pressure greases for prevention of wear, during usage at temperatures upto 130C. EP 2 GREASE can be used in plain and anti-friction bearings operating under high load conditions in various heavy duty industrial applications, steel mills, paper mills, heavy structural construction/fabrication industries, mining and automotive industries. EP 2 GREASE is also recommended for use in flexible type gear couplings.
REMARKS : THE GREASE IS DULY FORTIFIED WITHAdditional Information:
Payment Terms : L/C, T/T
Packaging Details : Tubes, Buckets, Drums and Plastic Bags
Delivery Time : 14 Days from The Date Of Advance
Specification
| TEST | METHOD | CONTROL LIMITS | TYPICAL RESULTS | |
|---|---|---|---|---|
| Min | Max | |||
| NLGI Grade | 2 | |||
| Thickener Type | Lithium | |||
| Color | As per requirement | |||
| Texture Adhesive | Smooth | |||
| Penetration @ 25°C | ||||
| Worked, 60 strokes | ASTM D-217 | 265 | 295 | 280 |
| Worked, 10,000 strokes | ASTM D-217 | 265 | 290 | 285 |
| Dropping Point, °C | ASTM D-2265 | 180 | - | 200°C |
| Timken EP Test, OK Load, Kg | ASTM D-2509 | 18 | - | 20 |
| Weld Load, kg | IP 239 | 200 | - | 220 |
| Water Washout Test, % wt. Loss @ 80°C | ASTM D-1264 | - | 10 | 5 |
| Oxidation Stability, 100 hr. psi loss @ 100°C | ASTM D-942 | - | 8 | 5 |
| Rust Prevention | ASTM D-1743 | - | - | Pass |
| Copper Strip corrosion | ASTM D 4048 | - | 1B | 1A |
| Wheel Bearing Leakage, gm | ASTM D-4290 | - | 10 | 1.5 |
| Base Oil Properties | ||||
| Viscosity: @ 40°C, Cst | ASTM D-445 | 100 | 120 | 120 |
| Viscosity: @ 100°C, Cst | ASTM D-445 | 12 | - | >13 |
EP 3 GREASE is first generation Lithium soap base grease containing extreme pressure [EP] additives for enhanced load bearing capacity. These greases are formulated with high quality paraffinic base oils and are fortified with balanced oxidation and rust inhibitors, as also EP additives. EP 3 GREASE possesses excellent shear stability under heavy duty service. EP 3 GREASE has excellent water tolerance and is adaptable to normal grease dispensing systems including centralised lubrication systems.
EP 3 GREASE is designed as multifunctional extreme pressure greases for prevention of wear, during usage at temperatures upto 130C. EP 3 GREASE can be used in plain and anti-friction bearings operating under high load conditions in various heavy duty industrial applications, steel mills, paper mills, heavy structural construction/fabrication industries, mining and automotive industries. EP 3 GREASE is also recommended for use in flexible type gear couplings.
REMARKS : THE GREASE IS DULY FORTIFIED WITH
| TEST | METHOD | CONTROL LIMITS | TYPICAL RESULTS | |
|---|---|---|---|---|
| Min | Max | |||
| NLGI Grade | 3 | |||
| Thickener Type | Lithium Hydroxystearate | |||
| Color | Red | |||
| Texture Adhesive | Smooth & Homogeneous | |||
| Penetration @ 25°C | ||||
| Worked, 60 strokes | ASTM D-217 | 220 | 250 | 240 |
| Dropping Point, °C | ASTM D-2265 | 190°C | - | >200° |
| Timken EP Test, OK Load, Kg | ASTM D-2509 | 20 | - | 22 |
| Weld Load, kg | IP 239 | 200 | - | 220 |
| Water Washout Test, % wt. Loss @ 80°C | ASTM D-1264 | - | 10 | 4.5 |
| Oxidation Stability, 100 hr. psi loss @ 100°C | ASTM D-942 | - | 7 | 5 |
| Rust Prevention | ASTM D-1743 | - | - | Pass |
| Copper Strip corrosion | ASTM D 4048 | - | 1B | 1A |
| Wheel Bearing Leakage, gm | ASTM D-4290 | - | 5 | 1 |
| Base Oil Properties | ||||
| Viscosity: @ 40°C, Cst | ASTM D-445 | 100 | 120 | 119 |
| Viscosity: @ 100°C, Cst | ASTM D-445 | 12 | - | >13 |
Ms. Rupa Alamelu (Vigor Me Fzc)P.O BOX – 49012, SHARJAH
HAMARIYAH FREE ZONE – U.A.E, United Arab Emirates
Share us via
