Wahat Al-Jareena Gen. Tr. LLC

Sharjah, United Arab Emirates

Sheet And Plates (Al/GI/CS/SS/Cu Ni/Alloy steel/Haste alloy etc.)

Coils ( GI/CS/SS)

The pipes our company supply and export are of superior quality and assure the clients a longer working life of our product. Having smooth surfaces both inner and outer, our products are also flexible, durable and corrosion resistant. The product exhibits high metallurgical properties and are usually used in for applications in the oil & gas and (petro)chemical industries.

(GI/CS/SS/Cu Ni/Alloy steel/Haste alloy /Boiler tubes etc.)

Pipes and Fittings Standards/Codes: ASME/ANSI/API/ ASTM, DIN, BS, ISO.

Pipes and Fittings suppliers: APOLLA STAINLESS STEEL, MAKE: INDIA, UK, USA, KOREA

We Supply a wide range of high quality steel round bars. Available in different shapes these bars are supplied using superior grade steel. These are used in diverse industries such as automobile petro- chemical and energy industry etc. These bars are available in stainless steel, nickel alloys and other ferrous & non-ferrous metals.

Valve Standards: API 598, API 600, API 602, BS 5352, BS 1873, BS 1868, BS 5351, BS 5353, BS 5155, BS 5156, BS 6765, BS 5146, BS 5150, BS 5151, BS 5152, BS, 5153, BS 5157, BS 5160, BS 5840, BS 6364, BS 6683, BS 6755, IS:10189, ANSI B16, MSS-SP 81, MS-SP 55

Manufacturers: Blend steel, Dongyang, Seo-Heung

Design: Horizontal, single stage, volute casing pumps with discharge branch arranged tangentially upwards/horizontal, flanged to a bearing pedestal. The pump is normally provided with open impeller.

Application:

• Pumping of clean, turbid or slightly contaminated liquids against medium and low heads in water works, sewage works, for irrigation and drainage, dewatering, pumping sea water and sugar industry, for spray pond/injection water applications.
• Suitable as coolant pumps in power stations and steel works pumping low concentration cellulose suspensions.

Materials: Graded cast iron, Bronze and CF8M (SS-316).

Composition if a flexible hose

A flexible hose is generally composed of metal hose, braids, and end fittings such as unions, flanges, nipples, and sockets.

A full face integral flange design is available in both Single Arch and Multiple Arch Types. These basic types can be manufactured to meet the requirements of the related Code and Standards. These types are available in several construction design series, based on the application pressure requirement.

Single Type Expansion Joint-Un Tied (MSN)

The simplest form of expansion joint, of single bellows construction, designed to absorb all of the movements of the pipe section in which it is installed.

According to operated pressure of a device, this model is manufactured with or without the shrink ring.

Design: Horizontal, radial split, volute casing pumps according to DIN 24255 std. with closed impeller, end suction, top centre line discharge. Back pull out design enables to remove the rotor without disturbing the pipelines.

Application:

• For handling clean or slightly turbid non-aggressive liquids.
• Suitable for pumping condensate, general water supply in agriculture, trade, and industries with favourable NPSH condition.

Materials: Cast Iron and Bronze.

Design: Horizontal, axially split single stage, inline design volute casing pumps with double suction, radial impeller according to API - 610 7th edition.

Application: This process and transfer pump has been developed for the most exacting conditions and can be used for a multitude of operations such as for pumping crude oil, oil and liquid hydrocarbons, furthermore for pumping cooling water, hot water, river water, brackish water as well as sea water, and also acids and alkalis. This type can also be used for loading in tank farms and as fire water pumps in fire fighting systems.

Materials: Graded cast iron / WCB/CF8/CF8M (SS-316)/317/317L/CD4MCU/Alloy - 20/Hastalloy - B/ Hastalloy - C, and material combination as per API - 610.

Design: Centreline - supported rigid foot arrangement, centreline discharge, back pullout design according to API 7th edition. 3 inch discharge and larger are having double volute to minimize radial thrust. Designed with heavy-duty shaft and bearings. Shaft diameter, bearing span and overhung so engineered to give very low deflection. Renewable impeller and casing wear rings.

Application:

• For operations in process industry and transfer systems - refineries, oil and gas fields on/off-shore, gas processing, transport systems, handling of liquid gases, petrochemical industry, chemical industry, energy conservation, and heat carrier systems.

Materials: Graded cast iron / WCB/CF8/CF8M (SS-316)/317/317L/CD4MCU/Alloy - 20/Hastalloy - B/ Hastalloy - C, and material combination as per API - 610.

Design: Horizontal, radial split, volute casing pumps according to DIN 24256 with closed impeller, end suction, top centre line discharge. Back pull out design enables to remove the rotor without disturbing the pipelines. If a spacer coupling is used, the motor does not have to be removed from the base plate. Only four bearing beds cover the entire 32 models. This means that the shafts, sleeves, bearings, and bearing beds are identical in and interchangeable for a large number of pump sizes.

Application:

• Chemical, Petrochemical, refineries, paper, and sugar industries.
• Suitable for hydrocarbons, acids, aggressive products, inorganic and organic chemicals

Materials: Graded cast iron / WCB/CF8/CF8M (SS-316)/317/317L/CD4MCU/Alloy - 20/Hastalloy - B/ Hastalloy - C etc.

• AC and DC motors for Various applications according to IEC and NEMA.
• Permanent magnet A/C motors
• Vertical solid base motors
• Compressor motors
• Marine duty motors
• Process motors etc.

Design: Vertical suspended pumps with closed and open impellers, for wet pit or dry pit applications, wear resistant design, overhung impellers. Two bearings support are provided above the base plate and intermediate bush bearings are avoided. Suitable for maximum submersion depth over 2 metres. For more depth, suction spool is used. Self-priming, simple mounting.

Application:

• Cantilever design best suits to highly corrosive applications as intermediate bush bearings are avoided.
• Recommended where space economy matters
• Vertical pumps are reliable alternatives to horizontal pumps
• Suitable for clear liquids, acids, alkalis, hydrocarbons, slurries, waste water, sugar melts, detergents etc.

Materials: Graded cast iron /Ni-hard-IV/WCB/CF8/CF8M (SS-316)/317/317L/CD4MCU/Alloy - 20/Hastalloy - B/ Hastalloy - C etc.

Design: Heavy duty, horizontal, centrifugal, back pull out design, according to DIN 24256. Open impellers are provided with renewable front wear plate and closed impellers with wear-ring. Simple external axial adjustment for impeller wear.

Application:

• Designed for handling paper stocks and pulps upto 7% consistency
• Also suitable for heavily contaminated liquids, raw sewage, roughly screened sewage, fresh, digested and activated sludge from clarification plants, and sludge water from gravel and clay pits, settling tanks

The wide passages in the suction zone of the impeller with less number of vanes and non-clogging design helps to handle stocks easily.

Materials: Graded cast iron / WCB/CF8/CF8M (SS-316)/317/317L/CD4MCU/Alloy - 20/Hastalloy - B/ Hastalloy - C etc.

Design: Vertical suspended pumps with closed and open impellers, for wet pit or dry pit applications, wear resistant design, overhung impellers upto 2 metres submersion depth, intermediate bush bearing support for submersion depth over 2 metres. Self-priming, simple mounting.

Application:

• Recommended where space economy matters
• Vertical pumps are reliable alternatives to horizontal pumps
• Suitable for clear liquids, acids, alkalis, hydrocarbons, slurries, waste water, sugar melts, detergents etc.

Materials: Graded cast iron /Ni-hard-IV/WCB/CF8/CF8M (SS-316)/317/317L/CD4MCU/Alloy - 20/Hastalloy - B/ Hastalloy - C etc.