al fanoos industries

duba, United Arab Emirates


  • 1501 M MITHO hot pressure washers

    Operating pressure bar 30÷100 Volume lh 240÷500 Outlet water temperature 90÷65 Oil consumption kgh 1.8 Absorbed power W 2000 Fuel tank l 4 Lenght of A.P. House m 8 Dimensions LxWxH cm 60 x 40 x 68 Weight [Kg] 52

    View Details » Send Enquiry »

  • 1802 M II MITHO PLUS hot pressure washers

    MITHO PLUS 1802 M II Operating pressure bar 30÷120 Volume lh 240÷500 Outlet water temperature 90÷65 Oil consumption kgh 2.1 Absorbed power W 2200 Detergent tank l 5 Lenght of A.P. House m 8 Dimensions LxWxH cm 68 x 50 x 73 Weight [Kg] 57

    View Details » Send Enquiry »

  • 2202 M II MITHO PLUS hot pressure washers

    MITHO PLUS 2202 M II Operating pressure bar 30÷140 Volume lh 240÷500 Outlet water temperature 90÷65 Oil consumption kgh 2.1 Absorbed power W 2700 Fuel tank l 4 Detergent tank l 5 Lenght of A.P. House m 8 Dimensions LxWxH cm 68 x 50 x 73 Weight [Kg] 57

    View Details » Send Enquiry »

  • 250 lt tilting mixer

    Professional tilting mixer with crown Drum capacity lt. 192 252 Mixing capacity lt. 135 200 Monophases electric motor HP (kW) 0,75 (0,55) 1,00 (0,75)Threephases electric motorHP (kW) - 1,00 (0,75) Diesel motor HP (kW) - - Gasoline motor HP (kW) - - Noise emission ...

    View Details » Send Enquiry »

  • 3 Wheel Mechanical flow meter

    The 807C Mechanical flow meter has a large easy to read display, flow ports can be positioned vertically or horizontally, ULcUL listed, handles fluid of any viscosity, rated for Gasoline, Diesel, Kerosene, mineral spirits, Stoddard solvents and heptane. Fill-Rite meters provide precision ...

    View Details » Send Enquiry »

  • 4 Wheel Mechanical Meter

    4 Wheel Mechanical Meter, 1" Meter 6-40 GPM The 901 Mechanical flow meter has a large easy to read display, flow ports can be positioned vertically or horizontally, ULcUL listed, handles fluid of any viscosity, rated for Gasoline, Diesel, Kerosene, mineral spirits, Stoddard solvents and ...

    View Details » Send Enquiry »

  • 90060 Vaccum Pumps

    1.5 CFM VACUUM PUMP (TWO STAGE) This lightweight and easy to store vacuum pump (12 lbs) is ideal for less than 3 lb capacity evacuation. The inlet ports include 14" FL and 12" ACME (for automotive R134a systems)

    View Details » Send Enquiry »

  • 90065 Vaccum Pumps

    5 CFM VACUUM PUMP (TWO STAGE) This model is an excellent choice for small to medium sized systems (2.5 lb to 10 lb charge capacity). This two stage pump features a manifold valve to isolate it from the system and three inlet ports: 14” FL, 38” FL and 12” ACME (for automotive R134a ...

    View Details » Send Enquiry »

  • 90067 Vaccum Pumps

    7.5 CFM VACUUM PUMP (TWO STAGE) This model is the choice for medium sized and larger systems (5 lb and above capacity). The 12 horsepower motor makes cold condition start up quick and easy. This two stage pump features a manifold valve to isolate it from the system and three inlet ...

    View Details » Send Enquiry »

  • AF DS 1606 M ONE High pressure washers

    Operating pressure bar 120 (MAX) Volume lh 360 Outlet water temperature 40(MAX) Absorbed power W 1800 Detergent tank l 0.5 Lenght of A.P. House m 6 Electric cable m 5.5 Dimensions LxWxH cm 34 x 32 x 47 Weight [Kg] 12

    View Details » Send Enquiry »

  • AF DS 2000 M High pressure washers

    AF DS 2000 M Operating pressure bar 140 (MAX) Outlet water temperature 60 Volume lh 450 Absorbed power W 2400 Detergent tank l 1 Lenght of A.P. House m 7 Electric cable m 5.5 Dimensions LxWxH cm 29 x 28 x 86 Weight [Kg] 19

    View Details » Send Enquiry »

  • Air Dryer

    A compressed air dryer is used for removing water vapor from compressed air. Compressed air dryers are commonly found in a wide range of industrial and commercial facilities. The process of air compression concentrates atmospheric contaminants, including water vapor. This raises the dew ...

    View Details » Send Enquiry »

  • Bar Bending Machines KMB-25

    1. Easily portable since the weight of this machine is the lightest in all. Strong and firm with a durability-oriented design. 2. Fast and easy change of angles with two control knobs attached to preset the bending angles. (Angles controllable from 1° to 180°) 3. Use of ...

    View Details » Send Enquiry »

  • Bar Bending Machines KMB-32

    Bar Bending Machines KMB-32 1. Easily portable since the weight of this machine is the lightest in all. Strong and firm with a durability-oriented design. 2. Fast and easy change of angles with two control knobs attached to preset the bending angles. (Angles controllable from 1Ëš ...

    View Details » Send Enquiry »

  • Bar Bending Machines KMB-32H

    1. Highly practical and well-functioning, designed to be perfect for the large-scaled civil engineering works(such as subway construction, rapid-transit railroad building,bridgebuiding etc.) 2. Fast and easy change of angles with two control knobs attached to preset the bending angles. ...

    View Details » Send Enquiry »

  • Bar Bending Machines KMB-32L

    1. Easily portable since the weight of this machine is the lightest in all. Strong and firm with a durability-oriented design. 2. Fast and easy change of angles with two control knobs attached to preset the bending angles. (Angles controllable from 1° to 180°) 3. Use of ...

    View Details » Send Enquiry »

  • Bar Bending Machines KMB-42H

    Bar Bending Machines KMB-42H 1. Highly practical and well-functioning, designed to be perfect for the large-scaled civil engineering works(such as subway construction, rapid-transit railroad building,bridgebuiding etc.) 2. Fast and easy change of angles with two control knobs attached ...

    View Details » Send Enquiry »

  • Bar Cutting Machines KMC-25H

    1. It has a excellent cutting capacity owing to a strong hydraulic. 2. It is suitable for small scale construction site because it is light(21kg) and portable 3. The blades made of special material seldom wear away. 4. With a scrictgualityconrtol, it has confidence of the best quality ...

    View Details » Send Enquiry »

  • Bar Cutting Machines KMC-25W

    1. Compact, lightweight and easily portable on the field. 2. A fast and powerful cutter heightens the efficiency of work. 3. Suitable for small and middle works. 4. The blades made of special material seldom wear away. You can also use 4 sides of the blade with 1 set. It guarantees ...

    View Details » Send Enquiry »

  • Bar Cutting Machines KMC-42

    1. A fast and powerful cutter adopting a multilevel gear and a flywheel. 2. Emphasis on safety using an iron guide in cutting. 3. The blades made of special material seldom wear away. You can also use 4 sides of the blade with I set. 4. Strong and firm with a durable driving gear ...

    View Details » Send Enquiry »

  • Body Repair Tools

    Body Repair Tools The most complete body repair kit due to the number of accessories and safest and sturdiest thanks to the threaded connections which allow pulling operations, compared with other more extensive but less reliable connection systems which only allow pushing ...

    View Details » Send Enquiry »

  • Building Motors

    Building Motors Generic features Motor with the best performances to work on cement mixer. Insulation class F. Volt for single phase motor: - 23050Hz ±5% - 22050Hz ±5% - 22060Hz ±5% - 11060Hz ±5% -10050Hz ±5%. Range for single phase motor: - 2 Poles frame size ...

    View Details » Send Enquiry »

  • carpet cleaner

    Motor N° 1 Motor W 1000 Motor HP 1.36 Motor V - Hz 230V - 50Hz Cooling By -pass Depression mmH2O 2200 Air flow m3h 170 Tank l 22 Inection Pump W 48 Inection Pump V-Hz 230-50 Inection Pump l.min 0.8 Inection Pump bar 2 Detergent Tank 6 Equipment - ...

    View Details » Send Enquiry »

  • cast iron

    High quality mechanical cast iron wheels, plain bore or with ball bearings, available in a range of diameters between mm 80 and mm 270 and combined with the various types of medium duty, heavy duty and extra heavy duty castors allow load capacities between Kg 100 and Kg 1800.

    View Details » Send Enquiry »

  • CLASS 12A - 9 Portable Battery Charger

    Portable battery charger  For Pb wet batteries charging  Battery voltage 12 and 24V  Charging current regulation  Overload protection  Inversions of polarity protection  Short circuits on the clamps protection  Input cable 2,2m with "Schuko" ...

    View Details » Send Enquiry »

  • CLASS 16A-12 Portable Battery Charger

    Portable battery charger :: CLASS 16A - 12,0 APortable battery charger  For Pb wet batteries charging  Battery voltage 12 and 24V  Charging current regulation  Overload protection  Inversions of polarity protection  Short circuits on the clamps ...

    View Details » Send Enquiry »

  • CLASS 20A - 20 Portable Battery Charger

    Portable battery charger  For Pb wet batteries charging  Battery voltage 12 and 24V  Charging current regulation  Overload protection  Inversions of polarity protection  Short circuits on the clamps protection  Input cable 2,2m with "Schuko" ...

    View Details » Send Enquiry »

  • CLASS 30A - 30 Portable Battery Charger

    Portable battery charger CLASS 30A - 30,0 Amp 1224 Volt - 230V 5060Hz Portable battery charger  For Pb wet batteries charging  Battery voltage 12 and 24V  Charging current regulation  Overload protection  Inversions of polarity protection  Short ...

    View Details » Send Enquiry »

  • CLASS 50A-50 Portable Battery Charger

    Portable battery charger  For Pb wet batteries charging  Battery voltage 12 and 24V  Charging current regulation  Overload protection  Inversions of polarity protection  Short circuits on the clamps protection  Input cable 2,2m with "Schuko" ...

    View Details » Send Enquiry »

  • Collapsible workbench

    Collapsible workbench in aluminium.  Can be used with any kind of pipe.  Includes tray fold in for easy carrying and setup.  Includes: o Slots for hanging tools. o Three pipe benders. o Can be used together with different vises and SUPER EGO machines such as ...

    View Details » Send Enquiry »

  • die grinders

    DIE GRINDERS COLLET SIZE 6 MM FREE SPEED 24000 RPM OVERALL LENGTH 143 MM NET WEIGHT 0.6 KG AIR INLET 14"

    View Details » Send Enquiry »

  • Diesel Engine KD170F/FE

    Model KD170FFE Type Vertical, 1-cylinder, 4-stroke, air-cooled Combustion system Direct injection Bore×storke [mm(in)] 70×55 (2.76×2.11) Compression ratio 20:1 Rated speed (rpm) 30003600 Fuel tank capacity [L(US.gal)] 2.5 (0.66)

    View Details » Send Enquiry »

  • Diesel Engine KD178F/FE

    Type Vertical, 1-cylinder, 4-stroke, air-cooled Combustion system Direct injection Bore×storke [mm(in)] 78×62 (3.07×2.44) Displacement [L(cc)] 0.296 (296) Rated power [KWrpm] 3.73000,4.3600 Rated power [HPrpm] 5.03000,5.53600 Starting system F: Recoil starter; E: Eletric ...

    View Details » Send Enquiry »

  • Diesel Engine KD186F/FE

    Type Vertical, 1-cylinder, 4-stroke, air-cooled Vertical, 1-cylinder, 4-stroke, air-cooled Combustion system Direct injection Direct injection Bore×storke [mm(in)] 86×70 (3.39×2.76) 86×72 (3.39×2.83) Displacement [L(cc)] 0.406 (406) 0.418 (418) Compression ratio 19:1 ...

    View Details » Send Enquiry »

  • Diesel Generator KDF2500X/XE

    Rated frequency (Hz) 50 60 Rated voltage (V) 220, 230, 240, 110220, 115230, 120240 Rated output power (KW) 1.8 2 Max output power (KW) 2 2.2 Rated rotation speed (rpm) 3000 3600 Phase number Single Excitation transistorized Self-excitation, brushless ATS type Without ...

    View Details » Send Enquiry »

  • Diesel Generator KDF4000X/XE

    Rated frequency (Hz) 50 60 50 60 Rated voltage (V) 220, 230, 240, 110220, 115230, 120240 380220, 400230, 420240 Rated output power (KW) 2.6 3 2.6 3 Max output power (KW) 3 3.3 3 3.3 Rated rotation speed (rpm) 3000 3600 3000 3600 Power factor cosφ 1 0.8 (lag) Phase number ...

    View Details » Send Enquiry »

  • Electric Cutting Machines --SUPER PRO 600

    Super professional tile cutters for diagonal and straight cuts on single-double fired ceramic and gres. Carriage with nine ball-bearings. Diagonal fence included. - Cutting length up to 600 mm - Size tile for diagonal cutting: 42 x 42 cm

    View Details » Send Enquiry »

  • Electric Cutting Machines -ELITE 80S

    Electric Cutting Machines -ELITE 80S Masonry saw ideal for the building sector suitable for straight and 45° angle cuts of bricks, stones, concrete-blocks, granite, marble and natural stones. Equipped with: - Single phase engine 230V 50Hz 3Hp2,2 Kw with thermal and ...

    View Details » Send Enquiry »

  • Electric Cutting Machines -JOLLY MAX S 300

    Electric Cutting Machines -JOLLY MAX S 300 Machine for straight and 45° angle cuts on marble, klinker and stones, equipped with: - Single-phase motor 230V-50Hz. 2,3 KW - Working table with sliding carriage - Switch with release coil - Diamond blade Ø 300 turbo - Adjustable ...

    View Details » Send Enquiry »

  • Electric Cutting Machines -SUPER PRO 900

    Electric Cutting Machines -SUPER PRO 900 Super professional tile cutters for diagonal and straight cuts on single-double fired ceramic and gres. Carriage with nine ball-bearings. Diagonal fence included. - Cutting length up to 900 mm - Size tile for diagonal cutting: 63 x 63 cm

    View Details » Send Enquiry »

  • Electric Cutting Machines-BASIC PLUS 60

    Electric Cutting Machines-BASIC PLUS 60 Tile cutters for diagonal and straight cuts on single-double fired ceramic and gres. Diagonal fence included. - Cutting length up to 600 mm - Size tile for diagonal cutting: 42 x 42 cm

    View Details » Send Enquiry »

  • Electric Cutting Machines-EXPERT 700

    Electric Cutting Machines-EXPERT 700 Stone saw ideal for the building sector suitable for cutting bricks, poroton blocks, marble blocks and all the different kind of materials for the building sector. Equipped with: - Three phases engine 400V 50Hz 5,5Hp4Kw with thermal and ...

    View Details » Send Enquiry »

  • Electric Cutting Machines-SUPER PRO 750

    Electric Cutting Machines-SUPER PRO 750 Super professional tile cutters for diagonal and straight cuts on single-double fired ceramic and gres. Carriage with nine ball-bearings. Diagonal fence included. - Cutting length up to 750 mm - Size tile for diagonal cutting: 52 x 52 cm

    View Details » Send Enquiry »

  • ELITE 1630 M High pressure washers

    ELITE 1630 M Operating pressure bar 30÷110 Volume lh 360 ÷720 Outlet water temperature 50 Absorbed power W 3000 Detergent tank l 7.5 Lenght of A.P. House m 10 Electric cable m 4.5 Dimensions LxWxH cm 74 x 43 x 81 Weight [Kg] 44

    View Details » Send Enquiry »

  • Evolution X5 DS 2960 T High pressure washers

    Evolution X5 DS 2960 T Operating pressure bar 200 Volume lh 900 Outlet water temperature 50 Absorbed power W 7000 Detergent tank l 25 Lenght of A.P. House m 15 Dimensions LxWxH cm 82 x 48 x 87 Weight [Kg] 88

    View Details » Send Enquiry »

  • FG5 lt 150 concrete mixer

    Drum volume lt. 150 Mixing capacity lt. 110 Single phase electric motor HP (kW) 0,50 (0,37) Three phase electric motor HP (kW) - Sound level db (A) 70 Overall dimensions L x W x H cm 145x85x125 Weight without motor Kg. 80

    View Details » Send Enquiry »

  • Fuel Pumps

    PM4 OIL PUMP, PRESSURE RATIO 3:1 - Wall mounted, stub pump Double acting air operated medium pressure and high volume pumps for dispensing lubricants in medium size installations including multiple dispensing points with simultaneous operation. Pumps are capable of pumping all types of ...

    View Details » Send Enquiry »

  • FUEL TRANSFERRING PUMP UNIT

    FUEL TRANSFERRING PUMP UNIT Diesel transfer pump - 24 V - 60 lmin Self priming transfer pump with 12 or 24 V DC motor. Pump includes by-pass valve, built in filter (can be easily removed to clean) and carrying handle. Electric motor with IP-55 ingress protection, onoff switch and ...

    View Details » Send Enquiry »

  • Hook jaws

    Hook jaws are manufactured in special steel.  Hook and heel jaws double heat-treated.  Different jaw openings for the same handle size.  Knurled and tempered adjusting nut, monoblock handle.  Set of flat and coil springs for instant pipe grip and perfect ratchet ...

    View Details » Send Enquiry »

  • HPS DS 2015 T High pressure washers

    Operating pressure bar 40÷200 Volume lh 450 ÷900 Outlet water temperature 30 ÷140 Oil consumption kgh 7.6 Absorbed power W 7100 Fuel tank l 30 Detergent tank l 16 Descaling tank l 3.2 Lenght of A.P. House m 15 Dimensions LxWxH cm 131 x 77 x 95 Weight [Kg] ...

    View Details » Send Enquiry »

  • Hydraulic Bottle Jacks

    These jacks are mainly used with vehicles fitted with a compressed air tank. They are very compact models. Their monoblock -integrated tank- uniweld construction reduces their dimensions and makes transportation easier. Ideal for work en route. The MGH series models are fitted with a ...

    View Details » Send Enquiry »

  • Hydraulic Presses

    Compact and functional design that integrates all the hydraulic elements within the chassis, provides a saving in the workshop space and ensures protection in transport.  Supplied fully assembled and ready for work.  We manufacture two models: The KMG KSG Monoblock version and ...

    View Details » Send Enquiry »

  • HYDRAULIC TRANSMISSION JACKS

    HYDRAULIC TRANSMISSION JACKS Particularly useful in the replacement of differential sets, transmissions, gear boxes, engines etc. The saddle is fitted with chains to ensure safe movement of load. Equipped with a detachable pump, which allows the jack to be used in any position.

    View Details » Send Enquiry »

  • hydraulic trolley jacks

    This display facilitates the combined presentation of both bottle and trolley jacks. Can be completely dismantled.  Weight: 41 kg.

    View Details » Send Enquiry »

  • Hydraulic Trolley Jacks- T-2

    The ergonomic handle with rubber grip allows for easier handling from any position. The models under 6t are fitted with polyamide wheels. These wheels will not damage garage floors, do not rust and are quiet in operation. Optimum use and distribution of material thanks to the rear side ...

    View Details » Send Enquiry »

  • Impact Wrenches

    IMPACT WRENCHES BOLT CAPACITY 38 MM SQ. DRIVE 25.4 MM MAX TORQUE 2000 N.M FREE SPEED 3500 RPM OVERALL LENGTH 510 MM NET WEIGHT 10.8 KG AIR INLET 12"

    View Details » Send Enquiry »

  • JET PROFY 2960 T High pressure washers

    JET PROFY 2960 T Operating pressure bar 30 ÷200 Volume lh 450÷900 Outlet water temperature 30÷140 Oil consumption kgh 5.8 Absorbed power W 7200 Fuel tank l 17 Detergent tank l 10 Descaling tank l 2 Lenght of A.P. House m 10 Dimensions LxWxH cm 100 x 64 x ...

    View Details » Send Enquiry »

  • Light easy handled stand

    Light easy handled work stand. Collapsible tray for easy carrying.  With adjustable rear leg for increased stability.  Stand accepts yoke vises and chain vises.

    View Details » Send Enquiry »

  • manifold gauge

    • Heavy duty forged brass body. • Large all metal handles are angled for ease of operation. • Free-floating piston type valves reduce o-ring wear. • Hose holder for convenient storage. • Silicone dampened gauges smooth out needle movement. • Gauges can be easily ...

    View Details » Send Enquiry »

  • MIRAGE ST 1629

    Motor N° 2 Motor W 1050 Motor V - Hz 230-50 Cooling By pass Depression - mmH2O 2180 Air flow m3h 410 Tank capacity l 62 Dimensions LxWxH cm 70 x 57 x 91 Liquid - suction YES Weight kg 20,4

    View Details » Send Enquiry »

  • MIRAGE ST 1640

    Motor N° 3 Motor W 1050 Motor V - Hz 230-50 Cooling By pass Depression - mmH2O 2180 Air flow m3h 615 Tank capacity l 62 Liquid - suction YES Dimensions LxWxH cm 70 x 57 x 91

    View Details » Send Enquiry »

  • Monoblock handle

    Monoblock handle in ultra light tempered aluminium alloy.  Hook and heel jaws double heat-treated.  Different jaw openings for the same handle size.  Knurled and tempered adjusting nut, monoblock handle.  Same durability as wrench 102 but lighter (40% lighter).  ...

    View Details » Send Enquiry »

  • Pallet Lifter

    BS Series Blue Label Bishamon BS series hand pallet trucks are easy to use and exceptionally durable. These premium pallet trucks have many features not found on competitive models and provide unsurpassed rollability. These pallet trucks are designed and ...

    View Details » Send Enquiry »

  • Pallet rollers

    Pallet rollers with AVOLAN and AVOPRENE polyurethane tread with steel centre available also with special polyurethanes-AVOANTISTATIC, AVOTOP, AVOWATER, AVOPLUS. Hight quality polyamide 6 pallet rollers. Pallet rollers with polyamide 6 centre and injection polyurethane tread. These ...

    View Details » Send Enquiry »

  • Pipe Bender CVT-2A

    Pipe Bender CVT-2A For GAS pipes, DIN 2440 and DIN 2441. Maximum bending angle: 180º. Supplied in a wooden case, with tripod stand and complete instructions for use, maintenance and bending work. Bending work can be carried out without physical effort thanks to the high force of the ...

    View Details » Send Enquiry »

  • PISTON TYPE COMPRESSORS

    Piston type Compressor is suitable for heavy duty usage with large volumes of air and high working pressure, very high efficiency and Safe and reliable projected to long extended life. It is ideal for all professional and industrial application. -Low speed pump. -13 Amp supply – for use ...

    View Details » Send Enquiry »

  • Plate Compactor --JPC-90WT

    JPC-90WT is equipped with endurable water tank and it optimized performance for compaction for with strong vibration force. High centrifugal force suitable for powerful compaction performance Engine guard and lifting hook as a standard feature observable oil level gauge strong ...

    View Details » Send Enquiry »

  • Plate Compactor -JPC-60

    JPC-60 plate compactor offers excellent compaction with durable vibrator and reliable engine and high quality at any job site. The economical choice for compact granular soil, trenches and driveways Low maintenance vibrator High centrifugal force suitable for powerful compaction ...

    View Details » Send Enquiry »

  • Plate Compactor -JPC-80

    JPC-80 Plate Compactor offers excellent compaction with a durable motor and reliable engine, and high quality at any jobsite. High centrifugal force suitable for powerful compaction performance Engine guard and lifting hook as a standard feature observable oil level gauge strong ...

    View Details » Send Enquiry »

  • Power Trowels

    JCF Power Trowels incorporate the following handy features to speed completion of projects and maintain uptime. Wide pitch control range of 0~15 degrees which can be adjusted during operation of equipment; centrifugal clutch pulley automatically adjusts for belt stretch; and blade pitch ...

    View Details » Send Enquiry »

  • POWER TROWELS TPT-36

    TPT-36 is designed and built for easy rapid finishing and is suitable for trowelling granolithic, dusted and color slabs. It is very convenient with durability and high performance to use at the job site to make big parking lot and large flat floor for commercial & industrial purpose.

    View Details » Send Enquiry »

  • Ratchet Wrenches

    RATCHET WRENCHES (38" RATCHET WRENCH) BOLT CAPACITY 10 MM SQ. DRIVE 9.5 MM WORKING TORQUE 20 N.M FREE SPEED 250 RPM OVERALL LENGTH 165 MM NET WEIGHT 0.5 KG AIR INLET 14"

    View Details » Send Enquiry »

  • Rubber Wheels

    Wheels with rubber tyre and steel flanges or thermoplastic material centre ,available also with no marking grey rubber and with special rubber tyres antistatic ,oil proof ,super elastic and twocomponent mix .Wheels with black elastic rubber tyre and aluminium centre or polyamide 6 ...

    View Details » Send Enquiry »

  • Sand Blast Machine

    Free jet sandblasting machine with work kit, d.16x30 10 meter jointed abrasive hose, nozzle, sifter, M01 non-rigid hood

    View Details » Send Enquiry »

  • Screw Compressor

    screw compressor is a type of gas compressor that uses a rotary-type positive-displacement mechanism. They are commonly used to replace piston compressors where large volumes of high-pressure air are needed, either for large industrial applications or to operate high-power air tools such as ...

    View Details » Send Enquiry »

  • SIBI BENZ HS 1920 B Engine Driven

    Remote Control By-pass Pressure - bar 130 Flow rate - lh 660 Max inlet water temperature - C° 50 Type motor Honda GX 120 Qx Motor power - kW 3 RPM 3600 Length of h.p. hose - m 8 Dimensions LxWxH 51x55x93 Weight kg 37

    View Details » Send Enquiry »

  • ST 1615 MIRAGE Dry Vacuum

    MIRAGE ST 1615 Motor N° 1 Motor W 1050 Motor V - Hz 230V - 50Hz Cooling By -pass Depression mmH2O 2180

    View Details » Send Enquiry »

  • TILE CUTTER X-PRO 40

    Super professional tile cutters “TO PULL” for diagonal and straight cuts on single-double fired ceramic and porcelain stoneware tiles. Equipped with: - carriage with adjustable ball-bearing - goniometric square - side extensions for big size of tiles. - Cutting length up ...

    View Details » Send Enquiry »

  • TS Aluminum Mechanical Meter

    Fill-Rite offers a full range of positive displacement TS Oval Gear Meters with weights and measures custody transfer accuracy for the measurement of a wide range of fuels, heavy oils, glycols, lube oils, and petro-chemicals. These meters are able to handle the pressure and maintain their ...

    View Details » Send Enquiry »

  • Vibrator Hoses

    HV series concrete vibrator provides the best performance & dynamic power by special vibration system of pendulum type. The low rotational speed about 3,000 RPM provides less wear & tear for all rotating parts. Unique spring concept guarantees long durability. Model: HV-38, 45, 50, ...

    View Details » Send Enquiry »

  • Vibratory Road Roller

    Model JVR-700 Net Weight (kg) 612 Dimensions H*W*L (mm) 1060*678*2350 Height of Handle Stands (mm) 1315 Front & Rear Roller (Dia. mm) 355*625 Axis to Axis (mm) 520 Speed (kmhr) 0~4.0 Vibration Frequency (cpm) 3000 Centrifugal Force (kg) 1400 Climbing Capacity ...

    View Details » Send Enquiry »

  • Vibratory Road Roller JVR-700T

    Model JVR-700T Net Weight (kg) 634 Dimensions H*W*L (mm) 1060*678*2350 Height of Handle Stands (mm) 1315 Front & Rear Roller (Dia. mm) 355*625 Axis to Axis (mm) 520 Speed (kmhr) 0~5.0 Vibration Frequency (cpm) 3000 Centrifugal Force (kg) 1400 Climbing Capacity ...

    View Details » Send Enquiry »

  • X-Pro 60 Electric Cutting Machines Tile Cutter

    Electric Cutting Machines TILE CUTTER X-PRO 60 Super professional tile cutters “TO PULL” for diagonal and straight cuts on single-double fired ceramic and porcelain stoneware tiles. Equipped with: - carriage with adjustable ball-bearing - goniometric square - side ...

    View Details » Send Enquiry »

[+] View All Products

Search


Contact Details

Malee Srinivasulu

, Duba, , United Arab Emirates

View Mobile No.