dubai, United Arab Emirates
Our Product / Services
One part, neutral -curing, fire stop silicone sealant (not an intumescent), prevents the spread of smoke and flames through open joints, penetration seals, partition walls and curtain walling. Used by sealant applicator professionals, firestopping professionals and tradesmen alike.
Available in black, white and greyMeets BS476 Part 22:1987 standardMovement capability +/- 50%Neutral cure, fire stopping certificatedUp to a 4-hour fire rating
DESCRIPTION:
81 10 is a high quality, quick tack adhesive specially formulated for brush application. It is specially formed adhesive to bond all type of insulation materials. i.e G.I aluminum air conditioning ducts and steel asbestos sheets. It provides excellent adhesion and good coverage.
USAGE:
81 10 is used for bonding fibrous insulation to concrete, wood gypsum board and rigid construction materials. And for laminating layers of bonding urethane foam to sheet metal and gypsum board, bonding low and high density fiber glass insulation. Interior / exterior sheet metal galvanized metal stainless steel and aluminum air conditioning and heating ducts, adhering Kraft-back foil and foil jacketing to urethane foam.
ADVANTAGES:
Excellent bonding ability and permanent adhesionRecommended for bonding variety of insulation material.Easy applicationResistant to water and moistureRequires no auxiliary clamp devicesExcellent aging properties
APPLICATION:All surface must to be coated must be clean, dry and free from dust, grease and any loose materials. Apply 81 10 by brush, roller or spray to the metal foil or rigid substrate having no bare spot. Apply insulation 0-20 minutes later. Open time depends upon atmospheric condition. To ensure good bond, adhesive should be sufficiently wet.
Ensure while applying 81 10 that there should be no source of fire nearby as the product is HIGHLY FLAMMABLE. Application must be carried out in a well ventilated area. Avoid prolonged breathing vapors.
All brushes and tools should be cleaned immediately after use.
PACKING:Available in 13 Kg pails.
STORAGE:Store at room temperature in well ventilated area. Shelf life is one year in unopened container.SPECIFICATION:
Appearance : L / Green
Application temp: 20C to 60CBase : Synthetic RubberConsistency : 1000200 cpsCoverage : 5sqm/lit (approx)Cure time : 15 to 20 minsFlash point : Highly Flammable SolventOpen Time : 0-25 minsService Temp : -18C to 75CSolid Content : 20 20%Solvent : Aliphatic Solvent System
HEALTH AND SAFETY INSTRUCTION:
Caution should always be exercised with all the construction chemicals. Gloves and goggles must be worn while using these chemicals. Any splashes to the eyes or skin should immediately be treated with fresh water. Should any of the products be accidentally swallowed, do not induce vomiting and call for medical help immediately.
System Thixotropic. Fast curing. High strength CPVC (chlorinated polyvinyl chloride Type IV Grade I) solvent cement Excellent gap filling properties. Tested by water quality centre (UK) according to BS 6920 water by-law for drinking water. Conforms to BS 7291: part 4:1990, ASTM D2846 and F-493.
Applications Used in hot and cold CPVC water pipes and fittings through 6up to 85 C. Designed for use on all CPVC pressure pipes in all classes and schedule, including schedule 80
Clear Heavy duty, Fast Curing. High Strength. Developed for hot climates. Excellent gap filling properties. Confirms to BS4346: Part3:1982 and ASTM S-2564. For pipe sizes with interference fit thru 12 all classes and schedules.For PVC Pipe and fitting applications, portable water, pressure, non pressure, conduit, drain, duct, DWV and sewer.
