ANBI GENERAL TRADING LLC

dubai, United Arab Emirates

Forged brass version, with EPDM seal, PN 10, G thread, for heating systems. For all nonagressive fluids such as water, oil, air, steam, fuel and lubricating oil. Working temperature 0 C to +110 C.Removes inevitable potentially dangerous air trapped in system. Simplifies the venting process. Saves time and costs.

1/2 x 1/2 angle valve with tricorn handle supplied with both hot & cold indicator.

2 Years Guarantee on the product.

These valves are available in Lever & Gear Type and is suitable for Semi & Fully Lugged Type.

The butterfly valve have the body,

Type BA: GG, JL 1040, accor. EN 1561Type BB: GGG, JS1030, accor. EN 1563.

The body has blue color (RAL 5017). Inside the body is a rubber liner made of EPDM in accordance with an ISO 1691, the disc is made of brass, nickel plated and the drive shaft split into 2 parts is made of Stainless Steel 1.4021 accor. to EN 10088.

The valve are available in Semi-lugged (type BA) or Fully-lugged (type BB) versions.

FLOATVENT Automatic vertical air vent valve. Sealed with O-ring. Designed for installation on head connections of flush manifolds. Brass CW617N body. Max. pressure: 10 bar. Max. temperature: 110C

The valve is available with aPVC-U, CPVCorPP-Hbody and with EPDM or FPM membranes. The choice of materials will depend on the type of liquid handled by the system and the operating temperature. See the chemical resistance chart available at our website and the pressure/temperature diagram.

Honeywell VC Series balanced 2-position hydronic valves are used in domestic and small commercial heating and cooling applications to control the flow of hot and/or cold water. They consist of an actuator, valve and a cartridge assembly 2-way valves are designed for on-off zone control of domestic systems. 3-way valves can be piped for either diverting or mixing valve applications in domestic central heating and/or cooling systems. Both versions can be used to control individual fan coil, radiator, space heater or convector applications. Depending on the model selected they can be controlled by a low or line voltage SPST or SPDT controller such as a room thermostat, aquastat or flow switch. VC Series hydronic valves are designed to take advantage of sinusoidal valve actuator travel, and therefore operate silently and reduce water hammer. Through internal logic the actuatoronly takes power while driving the valve to the commanded position. The actuator head is removable without affecting the integrity of the water system. All actuator versions are interchangeable with any valve body, offering the highest flexibility for boiler production line assembly, and maintenance. The valve piston construction allows for port sealing that is independent of the differential pressure across the valve. Flow through the 2-way valve can be in either direction, so the ports are not designated. 3-way valves are suitable for both diverting water from AB to A or B, and from A or B to AB.

Features

Rugged designControl by a low or line voltage SPST or SPDT controllerMinimal actuator power consumptionPressure differential up to 4 barDouble insulated actuatorQuick connect electrical connectionsQuick and easy replacement of moving partsActuator head installation does not require draining of the systemHigh flow rate capacity

Used at high points of piping system, on top of cooling coils etc. Supplied complete with check valve, which eliminates the need for a separate isolation valve. Features exclusive flare connection at outlet, from which a drip pipe can be led directly to the nearest drain. Leakproof solid polypropylene float. All materials of construction are non-corroding. Full brass body offers greater durability than plastic. Each unit is individually pressure tested before dispatch.

Automatic vertical air vent valve. Sealed with O-ring. Designed for installation on head connections of flush manifolds. Brass CW617N body. Max. pressure: 10 bar. Max. temperature: 110C