Laboratory Equipments #1920302

PHILIPP Spherical Head Transport Anchors consist of round steel where a spherical head and a foot are forged on.

PHILIPP Spherical Head Transport Anchors can be used to lift walls or beams and to transport precast concrete units. A safe load transfer requires minimum dimensions & minimum center distances for the installation and positioning.

Concrete units need to have a minimum surface reinforcement.

This anchor may only be used in combination with the original PHILIPP Spherical Head Lifting Clutch.

PHILIPP Spherical Head Transport Anchor has to be installed with the particular Recess Former, so that the Spherical Head Lifting Clutch can be coupled with the Spherical Head Transport Anchor simply and safely

PHILIPP Recess Former are used to fix PHILIPP threaded anchors, PHILIPP threaded inserts and PHILIPP lifting inserts onto the mould. The existing nail holes allow a fixation with nails.

The application of PHILIPP Recess Former ensures a rectangular contact area for the compression plate of the Swivel Lifting Device.

The approved MULTI-MONTI installation system is based on a new concept in anchoring technology. The Screw Anchor is set without a plug, thus saving a huge amount of time.

The technical arguments have convinced everyone. Low screw-in torques, a fitting which is free of expansion pressure, and its approvals for cracked and un-cracked concrete are the most significant technical features of this screw anchor.

The MULTI-MONTI has the ability to work close to the edge, and without a torque wrench, and can be re-used.

HECO MULTI-MONTI is the first Screw Anchor to get the ETA approval.

MULTI-MONTI is available in different versions, and covers almost all areas of use.

The main advantages of MULTI-MONTI are:

No waste of time; the Anchor will bear the loads immediately.Through bolt fixation is always possible.No torque control required.Easy power-tool handling.Saves up to 50% of the assembly time.It can be completely removed.

Secure Fixing, STAHL SVA Chemical Anchors provide a tension-free anchoring in concrete or masonry, which can withstand high static and dynamic loads, even with short edge distances or anchor spacing.

STAHL Chemical Anchors come with Anchor Studs from M8 to M30, they are available in yellow-passivated or A4 (316) Stainless Steel