United Arab Emirates
Write a Review
Our Products
Lubricants
2 Products availableAromatic & Essential Oils
1 Products availableCosmetics, Hair Care & Beauty Products
1 Products availableWe are leaders in the market for providing best range of Paraffinic Process Oil and Cationic Bitumen Emulsion Rapid Settings
| CHARACTERISTICS | UNIT | TEST METHOD | TYPICAL RESULT | ||||||||||||||||||||||||||||||||||||||||
| Density | Kg/L | ASTM D-4052 | 0.905 | ||||||||||||||||||||||||||||||||||||||||
| Colour | - | ASTM D-1500 | L.3.5 | ||||||||||||||||||||||||||||||||||||||||
| Viscosity | cSt | ASTM D-445 | 580 | ||||||||||||||||||||||||||||||||||||||||
| Viscosity | cSt | ASTM D-445 | 33 | ||||||||||||||||||||||||||||||||||||||||
| Viscosity Index | - | ASTM D-2270 | 84 | ||||||||||||||||||||||||||||||||||||||||
| Flash Point | c | ASTM D-92 | 276 | ||||||||||||||||||||||||||||||||||||||||
| Pour Point | c | ASTM D-97 | 6 | ||||||||||||||||||||||||||||||||||||||||
| Water Content | ppm | ASTM D-6304 | 97 | ||||||||||||||||||||||||||||||||||||||||
| Total Sulfur Content | % /m | ASTM D-4294 |
0.18
|
| TEST | METHOD | TYPICAL |
| Aniline Point, °C | D-611 | 86 |
| Color, Astm | D-1500 | L1 |
| Flash Point, Coc, °C | D-92 | 195 |
| Pour Point, °C | D-97 | -30 |
| Density@15°C , Kg/Dm3 | D-4052 | 0.9180 |
| VISCOSITY @40°C, Cst | D-445 | 98.00 |
| Sulfur, Wt% | D-2622 | 0.05 |
| PROPERTY | MIN | MAX | TEST METHOD |
| Viscosity, Saybolt Furol at 25°C, SFS | - | - | ASTM D244 |
| Viscosity, saybolt Furol at 50°C, SFS | 20 | 400 | ASTM D244 |
| Storage Stability test, 24-h, % | - | 1 | ASTM D6930 |
| Demulsibility, 35ml, 0.8 % dioctyl sodium sulfosuccinate % | 40 | - | ASTM D6936 |
| Coating Ability and water resistance: | |||
| Coating, dry aggregate | - | - | ASTM D244 |
| Coating, after spraying | - | - | ASTM D244 |
| Coating, wet aggregate | - | - | ASTM D244 |
| Coating, after spraying | - | - | ASTM D244 |
| Coating, wet aggregate | - | - | ASTM D244 |
| Coating, after spraying | - | - | ASTM D244 |
| Particle charge test | Positive | ASTM D244 | |
| Sieve test, % | - | 0.1 | ASTM D6933 |
| Cement mixing test , % | - | - | ASTM D6935 |
| Distillation: | |||
| Oil distillate by volume of emulsion, % | - | 3 | ASTM D6997 |
| Residue, % | 60 | - | ASTM D244 |
| Test on residue from distillation test : | |||
| Penetration, 25 °C (77°F ), 100g, 5s | 100 | 250 | ASTM D5 |
| Ductility, 25 °C (77 °F), 5 cm/min, cm | 40 | - | ASTM D113 |
| Solubility in trichloroethylene, % | 97.5 | - | ASTM D2042 |
Petroleum jelly is a mixture of hydrocarbons originally promoted as a topicalointmentfor its healing properties.
Petroleum jelly is covering a bass range of application not only in medicinal, cosmetic and personal care sectors in perfumed and enriches varieties. And also can be applied in metal to protect and to maintain the machineries because it is acid-free lubricants .Petroleum Jelly slightly soluble in alcohol, to avoid damage to plastics as well as to minimize ventilation issues.
Its made of two main elements: base stock and additives. The base stock commonly makes up 95 percent of the solution and is either made from petroleum, synthetic chemicals or a mixture of the two. The base stock is responsible for lubricating an engines moving parts and removing built-up heat. The additives, meanwhile, account for roughly five percent of the oil and it is these chemicals that are responsible for finely controlling oil viscosity and lubricity, as well as protecting engine parts against wear.
A K Thouseef (Delmar Kuwait Petroleum Trading Company)MAZAYA BUSINESS AVENUE,JLT,DUBAI., DUBAI, United Arab Emirates, United Arab Emirates
Share us via
