Ebcom Ltd.

United Arab Emirates


  • Agricultural Loader

    A multipurpose rugged and powerful machine which can be quickly attacheddetached to the front of Massey Ferguson Tractors for handlingloading stonebrick crush, garbage, sand, grains, wood loge etc. into a truck or trailer.

    View Details » Send Enquiry »

  • ARTICULATED BUS

    An articulated bus (either a motor bus or trolleybus) is an articulated vehicle used in public transportation. It is usually a single-deck design, and comprises two rigid sections linked by a pivoting joint. Used almost exclusively on public transport bus services, articulated buses are ...

    View Details » Send Enquiry »

  • back hoe

    A backhoe, also called a rear actor or back actor, is a piece of excavating equipment or digger consisting of a digging bucket on the end of a two-part articulated arm. They are typically mounted on the back of a tractor or front loader. The section of the arm closest to the vehicle is known as the ...

    View Details » Send Enquiry »

  • Billets

    BILLETS Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. Smaller and longer than a bloom, billets are usually a square cross section less than 36 square inches. They are used for the ...

    View Details » Send Enquiry »

  • blooms

    Blooms are hot-rolled or forged from an ingot or strand cast. They usually have a square cross section exceeding 36 square inches. They are mainly used in the manufacture of long products such as structural shapes, structural profiles, building beams, rails and columns.

    View Details » Send Enquiry »

  • boom truck

    A bucket boom truck, sometimes called a cherry picker, is a vehicle with an extendable boom mounted to the bed or roof. A bucket boom may be used to lift workers to the top of a phone or electrical pole, or to a high roofline. Also known as an aerial boom truck, these trucks are a fairly common ...

    View Details » Send Enquiry »

  • Chrome Ore

    Chromium is a metal used to induce hardness, toughness and chemical resistance in steel. The alloy produced is known as "stainless steel." When alloyed with iron and nickel, it produces an alloy known as "nichrome" which is resistant to high temperatures and used to make heating units, ovens and ...

    View Details » Send Enquiry »

  • Coal

    Coal is a family name for a variety of solid organic fuels and refers to a range of combustible sedimentary rock materials spanning a continuous quality range. For convenience, this continuous series is divided into four categories: 1) anthracite, 2) bituminous coal (metallurgical coal), 3) ...

    View Details » Send Enquiry »

  • coated sheet

    Coating steel sheet improves durability and lengthens product life. It is manufactured to meet specific customer requirements for corrosion resistance, strength and formability. Thickness, width, surface quality and surface finish vary greatly. The most typical applications are for metal ...

    View Details » Send Enquiry »

  • Coated Steel Coil

    Colour coated, or pre-painted, steel, is steel coil to which a paint, powder or film coating has been applied in a continuous process prior to it being cut and shaped. It provides a durable uniform surface finish, and can be an alternative to conventional post-manufacture painting of steel parts. ...

    View Details » Send Enquiry »

  • Coke

    A solid carbon based product derived from baking bituminous coal at high temperature to remove volatile constituents. Metallurgical coke ('met coke') is used as the main fuel in the smelting of iron ore in a blast furnace. The quality of coke has a significant influence on furnace productivity ...

    View Details » Send Enquiry »

  • Cold Rolled Coil

    Cold rolled steel is a flat steel product. The material is manufactured from hot rolled steel, the thickness of which is further reduced on a strip mill without the use of heat. The resulting thinner and flatter material is known as cold rolled steel. Typical thickness is from 0.15 to 3 mm. Typical ...

    View Details » Send Enquiry »

  • Cold Rolled Sheet

    Flat rolled products for which the required final thickness has been obtained by rolling at room temperature. To meet the various end use requirements, cold-rolled sheet products are metallurgically designed to provide specific attributes such as high formability, deep drawability, high strength, ...

    View Details » Send Enquiry »

  • Copper

    Presently, copper is used in building construction, power generation and transmission, electronic product manufacturing, and the production of industrial machinery and transportation vehicles. Copper wiring and plumbing are integral to the appliances, heating and cooling systems, and ...

    View Details » Send Enquiry »

  • Disc Plough

    Used for deep ploughing in root-infested, sticky, stony, and hard soils. Mixes remains of crops and weeds throughout the depth of ploughing, hence ideal for rain-fed areas for checking soil erosion by water and wind. Spring loaded floating rear furrow wheel controls the side draft to ensure ...

    View Details » Send Enquiry »

  • engineering steels

    Engineering steels, or special bar quality (SBQ), is used to describe steel long products for more demanding processing or end-use applications than can be met by commodity grades. Products include bright bars, rolled carbon and alloy bars, forged, tool and stainless steels. These are generally ...

    View Details » Send Enquiry »

  • Excavator

    Excavators are heavy construction equipment consisting of a boom, stick, bucket and cab on a rotating platform (known as the "house"). The house sits atop an undercarriage with tracks or wheels. A cable-operated excavator uses winches and steel ropes to accomplish the movements. They are a natural ...

    View Details » Send Enquiry »

  • Farm Trailer

    FARM TRAILER Farm trailer provides cost effective means of farm transportation. All steel body Robust construction trailers provide a selection of sizes from 3.5-12 Tons.

    View Details » Send Enquiry »

  • ferro-alloys

    Alloys of iron with a high proportion of added elements - such as silicon, nickel, chromium, molybdenum, vanadium and manganese - that are used to improve properties in the production of special steels. As part of the steel production process, ferro-alloys are added to the usual mix of raw ...

    View Details » Send Enquiry »

  • Forgings

    Forging is a metal forming process whereby carbon steel is heated and given a particular shape by the application of a compressive force. Usually the compressive force is in the form of hammer blows using a power hammer or a press. Forging refines the grain structure and improves the physical ...

    View Details » Send Enquiry »

  • Front Blade

    The Power Dozers are designed and built to match the performance of the MT tractors. They are operated hydraulically by single or twin double acting rams. The points of attachment of the dozer to the tractor are reduced to an absolute minimum and the mounting brackets, once fitted, can be ...

    View Details » Send Enquiry »

  • Hot Dipped Galvanized Coil

    Obtained by passing cold rolled coil through a molten zinc bath, in order to coat the steel with a thin layer of zinc to provide corrosion resistance. Hot dipped galvanized coil can be found on the market in coil or in sheets and is further processed into finished products by the manufacturer. ...

    View Details » Send Enquiry »

  • Hot Rolled Coil

    Hot rolled coil is rolled on a hot strip mill from slabs. It can be found on the market in coil or sheet form and is further processed into finished products by the manufacturer. Hot rolled coil is typically 2-25mm thick and up to 2,250mm wide. Hot rolled coil is produced as a feedstock ...

    View Details » Send Enquiry »

  • hot rolled sheet

    Hot Rolled Sheet is rolled on a hot strip mill from slabs. It can be found on the market in coil or sheet form and is further processed into finished products by the manufacturer. Hot rolled coil is typically 2-25mm thick and up to 2,250mm wide. Hot Rolled Sheet is produced as a feedstock ...

    View Details » Send Enquiry »

  • Iron Ore

    Iron ore is formed of rocks, minerals or meteorites from which metallic iron can be extracted.Typically, the iron is in the form of iron oxide, which varies in colour from dark grey, bright yellow and deep purple to rusty red.Iron ore can have up to 65% ferrous content, but is often lower and needs ...

    View Details » Send Enquiry »

  • Jib Crane

    There are many jobs around the farm that often involve back breaking work and much effort-jobs like loading and unloading large drums of fuel, feed, seeds, fertilizer bags, building materials, machinery ad similar chores. The Jib Crane provides the answer to all these problems and they can all ...

    View Details » Send Enquiry »

  • Loader

    A loader (bucket loader, front loader, front-end loader, payloader, scoop, shovel, skip loader, or wheel loader) is a heavy equipment machine used in construction and sidewalk maintenance to move aside or load materials such as asphalt, demolition debris, dirt, snow, feed, gravel, logs, raw ...

    View Details » Send Enquiry »

  • Manganese

    Manganese is used in steel alloys to increase many favourable characteristics such as strength, hardness and durability. In fact steel cannot be produced without manganese; it is an essential ingredient in the process. Steel becomes harder when it is alloyed with manganese. It has similar ...

    View Details » Send Enquiry »

  • merchant bar

    Merchant bar is a range of commodity carbon steel long products including round, square and hexagonal bars, angles, channels and flats. Maximum diameter or width is usually 80-100mm, although flats up to 150mm wide are included. These are a staple item for many steel stockholders, large or ...

    View Details » Send Enquiry »

  • Mobile Crane

    A mobile crane is "a cable-controlled crane mounted on crawlers or rubber-tired carriers" or "a hydraulic-powered crane with a telescoping boom mounted on truck-type carriers or as self-propelled models. They are designed to easily transport to a site and use with different types of load and cargo ...

    View Details » Send Enquiry »

  • Mould Board Plough

    The most important plough for primary tillage in canal irrigated or heavy rain areas where too much weeds grow. The objectivefor ploughing with a Mould Board is to completely invert and pulverize the soil, up-root all weeds, trash and crop residues and bury them under the soil. The shape of ...

    View Details » Send Enquiry »

  • Offset Disc Harrow

    The Offset Disc Harrow has a heavier weight per Disc and thus have the penetration ability to break down large clods normally left after disc ploughing or Chisel Ploughing in hard grounds. It is of robust construction, used as mounted or trailed and ideal for chopping and mixing of stubbles and ...

    View Details » Send Enquiry »

  • Pig Iron

    A key intermediate material in the integrated (converter-based) steelmaking process, pig iron is the product of smelting iron ore, coke and limestone in a blast furnace. Pig Iron is used directly in the manufacture of steel. Merchant pig iron is sometimes used as a substitute for scrap in EAF ...

    View Details » Send Enquiry »

  • Post Hole Digger

    Post Hole Digger is a PTO driven machine that digs holes in rows on equal distances mechanically and economically. Best suited for tree plantation. Also can be used for hole making for electric poles and farm hedges. It can dig about 90 cm deep hole of even diameter in just 30 ...

    View Details » Send Enquiry »

  • reinforcing bar

    Reinforcing bar (or Rebar) is formed from a steel billet, normally having surface deformations for use in reinforcing concrete. The bar can be produced in straight lengths as well as coiled. Rebar is used in the construction industry to reinforce concrete.

    View Details » Send Enquiry »

  • Ridger

    Used for making ridges for planting , potato and other vegetables. The ridger is fully adjustable for giving different accurate row widths. To obtain the correct ridge profile and retain soil flow, the high grade mould boards are adjustable. The ridger can also be used for earthing ...

    View Details » Send Enquiry »

  • Scrap

    Steel can be recycled almost indefinitely without losing its properties. Obsolete ferrous scrap is derived from steel-containing goods at the end of their useful lives (e.g.a drinks can, a 15-year-old car, a 50-year-old building). Revert scrap is steel waste produced and recycled within a ...

    View Details » Send Enquiry »

  • Seamless Tubes

    Seamless tubes are made by rolling a preheated billet between offset rolls to create a tube shell. The tube shell is then elongated in a multi-stand rolling mill (with a mandrel) to achieve the desired wall thickness and a limited range of diameters. Tube diameter can also be achieved with a sizing ...

    View Details » Send Enquiry »

  • Slabs

    Steel slabs are hot-rolled from an ingot or strand cast. They are wide and rectangular in shape. They are used for the manufacture of all flat steel products such as coils, sheets, strip, plates and other flat-rolled steel products.

    View Details » Send Enquiry »

  • Stainless Steel

    Stainless steel is the generic name for a number of different steels used primarily for their resistance to corrosion. The one key element they all share is a minimum percentage of chromium: 10.5%. Although other elements are added to improve corrosion resistance, chromium is always present. The ...

    View Details » Send Enquiry »

  • STANDARD BUS

    EBCOM. LIMITED has an extensive range of buses that will surely meet your requirement. From mini-bus to full-sized bus or even luxury coaches, EBCOM. LIMITED with its partnership with manufacturers, can truly satisfy customers by supplying buses according to international standards.

    View Details » Send Enquiry »

  • structural sections

    Heavy or structural sections are steel products such as beams or columns which are usually formed with a specific cross section shape e.g. H, I or U. Used to build large structures such as multi-storey buildings and bridges. We can supply various specification of Structural Sections ...

    View Details » Send Enquiry »

  • SWINGING DRAW BAR

    Ideal gadget for towing any type of farm load including trailed implements, by attaching it to a tractor under center axle housing. Can be fitted to MF 240. MF 350, MF 260, MF 375, MF 385 and MF 385 4WD tractors. The swinging draw bar conforms with British Standard having a Clevis hitch point ...

    View Details » Send Enquiry »

  • Telecommunications

    Ranging from various IT Equipment (Desktop, Laptops, Multi-function Printers, Servers, etc) to mobile phones and tablets, EBCOM. Limited can supply these items according to your desired specifications while meeting your target price.

    View Details » Send Enquiry »

  • Tin Plate

    Tinplate is cold reduced steel sheet coated with a thin layer of tin. Tin mill products are produced in a variety of types including electrolytic tinplate, electrolytic chromium coated steel and black plate, an uncoated product. It has good corrosion resistance and food compatibility although many ...

    View Details » Send Enquiry »

  • Tine Tiller

    Ideal for general cultivating, weeding, pasture renovating and preparing seedbeds.. The tiller is available in 4 widths: 9, 11, 13 and 15 tines. The tiller is fully mounted on the tractor by means of Category I or II three point hitch pins. The spring-loaded tines swing back under ...

    View Details » Send Enquiry »

  • Tractors

    Most economical in 50 HP range Rugged, maneuverable and compact Easy accessability to service points Ideal, versatile, all round tractor Spring suspension deluxe Seat Availability of parts and service facilities at your doorstep

    View Details » Send Enquiry »

  • Welded Tubes

    Welded tubes are made from hot rolled or cold reduced strip, sheet or plate. Welded tube includes hollow sections, black and galvanised gaswater pipe, scaffolding tube and large diameter pipe. Small and medium diameters are produced in continuous, multiple-roll mills that progressively bend ...

    View Details » Send Enquiry »

  • WHEAT & FLOUR

    OUR MAIN PRODUCTS ARE AS FOLLOWS: Atta 10kg, 20kg, 40kg, 80kg Atta Special 10kg, 20kg, 40kg, 80kg Choker (Bran) 20kg, 20kg(Thick), 20kg(Thin), 24kg, 27kg, 28kg, 29kg, 30kg, 34kg, 38kg, 39kg, 50kg Fine 20kg, 40kg, 85kg Maida 20kg, 40kg, 85kg

    View Details » Send Enquiry »

  • Wire Rod

    Hot rolled from steel billet, wire rod is delivered as coil, most commonly at 5.5mm dia, but in sizes up to 60mm dia. Close control of final cooling is a critical part of production. The most important characteristic for determining a rod's end use is its drawability; the extent to which the rod's ...

    View Details » Send Enquiry »


Search


Contact Details

Joginder Singh

A4-56,Saif Zone, Sharjah., Sharjah, , United Arab Emirates

View Mobile No.