Post Your Requirement Menu

Welcome User

Other Products / Services

Our product range comtains a wide range of Aquafos Pressure tank, booster pumps, Speedrive Pressurization Booster Sets, Silent Swimming Pool pump pump and Press Line VE Surface Vertical Water Pump

Aquafos Pressure tank

Aquafos Pressure tank   Features: • NSF Standard 61, IAPMO R&T UPC approved • Polypropylene liner ensures long durability • Butyl diaphragm assure long life and safety • Highly rust resistant durable baked epoxy coating finish • Cast stainless steel water connection • Leak free, 0-ring sealed air valve cap 4, 100% pressure tested • No maintenance

View Complete Details

booster pumps

Applications Fully automatic variable speed units, for commercial and domestic applications. ESPA In-Line Inverter booster sets are designed to provide an efficient solution to water boosting applications where existing supplies are unreliable or insufficient to meet the demands of commerce and industry. ESPA variable speed booster sets embrace the best in modern control techniques, whilst holding true to the traditional principles of quality engineering. Due to the compact design ESPA booster sets offer a small footprint in relation to performance. Installation is straightforward, with site work usually limited to connecting site pipe work and the provision of a suitable electrical supply. Features   Stainless steel suction and discharge manifolds AISI 304. Steel chassis finished in black epoxy coating.   ESPA In-Line inverter advantages An innovative system that can be used with a variation of pump types including multistage and single stage. Saves energy, silent running, compact, and can extend the life of the pump. Designed to vary the frequency (Hz) of the pump in order to keep the hydraulic system at a constant pressure. Interface is user friendly, allowing easy use to calibrate pressure set points, view error messages, and setting. Works directly on the hydraulic manifold and installed on the discharge pipeline of the booster set.

View Complete Details

Speedrive Pressurization Booster Sets

The most efficient system for adjusting a pump’s hydraulic performance to the pressure and flow requirements of supplying water is through the use of variable-speed technology. In the case of supplying water to a building that requires a constant pressure regardless of the water flow requested, with a variable-speed system, in addition to improved efficiency, a high-quality, oscillation-free service is obtained, guaranteeing greater durability of the equipment and the installation. The ESD unit receives a proportional signal from a pressure transducer fitted on the discharge pipeline. The ESD processes this signal and regulates the motor speed in order to keep the pressure constant at the established level, regardless of the variations in flow demand. With this pump set the pump’s operation can be adapted to the different flow demands, constantly setting the consumption that is strictly necessary for the demand at any given moment. The energy consumption will be proportional to the water consumption. In comparison to the same system running at a fixed speed, this translates directly into energy savings. Operating modes The ESD has a backlit display and a 5-button keypad for displaying the user parameters. The installer can easily regulate and modify the basic operational parameters through the same interface. It also includes a reset option to recover the default factory parameters. Adjustable operating parameters Language: options ES, EN, DE, IT, FR. Operation: AUTOMATIC – MANUAL Set pressure: set point. Differential pressure: hysteresis or difference in the set pressure that marks the start-up of the pump. Maximum motor intensity: to regulate motor protection. Pump sleep frequency: sleep frequency; this can be set manually or automatically. ESD has a system for automatically calculating the pump’s sleep frequency on the basis of the specific characteristics of each installation and the set pressure point. Pump stop temporisation Nominal motor frequency: 50 Hz – 60 Hz. Motor rotation reversa l ON–OFF auxiliary pump: auxiliary pump in fixed-speed DOL operation. Auxiliary pump in variable speed mode by ESD at variable speed. Configuration in auxiliary pumps Activation frequency: activation frequency of auxiliary pumps. Auxiliary pump activation temporisation. Auxiliary pump maximum intensity. Parameters displayed Set pressure Differential pressure. Maximum motor intensity Stoppage frequency Pump stop temporisation. Module temperature. Alarm display: power surge, short-circuit, power failure and module temperature. Operational register: number of start-ups, hours in operation and hours online.

View Complete Details

Silent Swimming Pool pump pump

Applications Recycling and filtering of water from small and medium swimming pools. Materials Pump body, pump foot, impeller, seal mounting and diffuser in technopolymer. Motor shaft in stainless steel AISI 420. Mechanical seal in graphite and alumine. Motor housing in aluminium. O-rings in NBR. Motor Asynchronous, two poles. IP 55 protection. Class F insulation. Continuous operation. Single-phase version built-in thermal protection. Limitations Maximum suction lift 4 m. Equipment Supplied with suction and discharge unions (metric or imperial).

View Complete Details

Press Line VE Surface Vertical Water Pump

Applications Spray irrigation systems and hydropneumatic sets. Materials Pump shaft, impellers, pump body and protection grid in stainless steel AISI 304. Suction body, discharge body and motor-pump coupling in cast iron. Motor housing in aluminium. Press-Line VE94: Rods F 212 Zn. Pump motor coupling system V18. Press-Line VE121: Pump motor coupling system V1. Motor Asynchronous, two poles. Class F insulation. Continuous operation.

View Complete Details

Delta Surface Horizontal, Rotary Grinding Machine

Applications To work with clean water. Irrigation and hydropneumatic sets. Materials Pump body in stainless steel AISI 304. Motor shaft in stainless steel AISI 420. Diffusers in glass loaded Noryl®. Mechanical seal in graphite and steatite. Motor housing in aluminium L-2521. Windings impregnated with epoxy resin. Delta 505/755/1005: Impeller in glass loaded Noryl®. Delta 1755: Impeller in stainless steel AISI 304. Motor Asynchronous, two poles. IP 44 protection. Class F insulation. Continuous operation. Single-phase version with built-in thermal protection. Provided with removable handle for transport. Limitations Maximum suction lift: 9m. Maximum temperature of liquid: 40°C.

View Complete Details

Horizontal Multi Stage Centrifugal Pump

Applications To work with clean water in domestic applications, irrigation, and hydropneumatic sets. Materials Pump body and impellers in stainless steel AISI 304. Motor shaft in stainless steel AISI 420. Suction and discharge mountings in brass. Mechanical seal in graphite and alumine. Motor housing in aluminium. Built-in self priming valve, not very sensitive to the impurities. O-rings in EPDM and NBR. Motor Asynchronous, two poles Class F insulation. Continuous operation Single-phase with built-in thermal protection.

View Complete Details

Draincor Drainage Pump

Applications Drainage of sewage and dirty water, operation in septic tanks and small purifying installations. Materials Pump body, discharge body, suction body and impeller in cast iron. Dilacerative system in steel F-520. Mechanical seal in silicon carbide and graphite. Pump base in stainless steel AISI 304, detachable for coupling of accessories. O-rings in NBR. Motor shaft in stainless steel AISI 420. Motor Asynchronous, two poles. IP 68 protection. Class F insulation. Continuous operation. Water-cooled motor. Single-phase version built-in thermal protection and starting box with double capacitor. Equipment 11/2” BSP female threaded discharge elbow. Single-phase supplied with capacitor box. Draincor M A: complete with float switch

View Complete Details

Vigila SS Drainage Pump

Applications Drainage of infiltration water, empty swimming-pools, operation in decorative fountains and waterfalls. Materials Discharge cover, pump casing, motor casing and filter in stainless steel AISI 304. Impeller in elastomer plastic, reinforced with steel sheet. Pump direction mounting and foot in tecnopolimer. Motor shaft in stainless steel AISI 420. Mechanical seal in silicon carbide/ alumine oxide. O-rings in NBR. Motor Asynchronous, two poles. IP 68 protection. Class F insulation Continuous operation. Built-in thermal protection. Limitations Maximum passage of solids: 8mm. Maximum immersion: 9m. Maximum liquid temperature: 40°C. Equipment Supplied with 10m of electrical cable. Integral capacitor. Vigila SS: without floating level switch. Vigila SS A: with floating level switch.

View Complete Details

Vigilex Drainage Pump

Applications Drainage of sewage and dirty water, in domestic installations, operation in septic tanks and small purifying installations. Materials Pump body and pump foot in glass- loaded polypropylene. Impeller in glass-loaded polyamide. Double-lip seal in NBR. Motor Asynchronous, two poles. IP 68 protection. Class F insulation. Continuous operation. Built-in thermal protection. Vigilex M: without floating level switch. Vigilex M A**: with floating level switch. Limitations Maximum passage of solids: 24mm. Maximum immersion: 9m. Maximum liquid temperature: 40°C. Equipment Supplied with 10m of electrical cable. Available with or without float switch.

View Complete Details

SELF PRIMING JET WATER PUMP

APPLICATION Selfpriming jet water pumps with a very high hydraulic performance and a considerable pressure capacity. Able to pump up to mt. 8 depth and work perfectly even in soda-water. Suitable for water lifting and distribution in domestic fittings by small and medium sized tanks. OPERATING CONDITIONS Max. working pressure 6 bar. Total suction lift upt o 8 mt. Continuous duty. MOTOR Two-Pole induction motor (n = 2850 min-1). Insulation Class F. MATERIALS Pump body : Cast Iron Motor Support: Aluminium. Impeller : Noryl. Diffuser: Noryl. Pump flange: Stainless Steel. Shaft with rotor Stainless Steel. Mechanical seal Ceramic/Graphite.

View Complete Details

Volumetric water pumps

Volumetric water pumps able to offer high pressions in relation to comparatively low powers and which have particularly steady operating curves. They are qualified in domestic fittings, to increase the system pressure in aqueducts and for automatic water distribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities.   OPERATING CONDITIONS Max. working pressure 6 bar. Total suction lift upt o 8 mt. Continuous duty. MOTOR Two-Pole induction motor (n = 2850 min-1). Insulation Class F. MATERIALS Pump body : Cast Iron Motor Support: Aluminium. Impeller : Noryl. Diffuser: Noryl. Pump flange: Stainless Steel. Shaft with rotor Stainless Steel. Mechanical seal Ceramic/Graphite.

View Complete Details

SPERONI CUTTING SUBMERSIBLE PUMP

APPLICATION The Cutty series comprehend electric pump with plunged impeller, this impeller is multi-pipe, open, with a cutting system in the suction.. It is particularly suitable in presence of long, filamentous or fibrous fibres, of destroyable solids also of big dimensions and in biologic liquids or in civil waters.. OPERATING CONDITIONS Submersion depth 20 mt. Grain size inlet Ø 50 mm. Min. suction level 80 mm. Continuous duty. MOTOR Insulation Class F. Thermic protection. MATERIALS Motor body: Cast Iron. Pump body: Cast Iron. Impeller Cast Iron. Shaft with rotor Stainless Steel. Suction strainer Stainless Steel. Double mechanical seal Silicon/Silicon + Ceramic/Graphite.

View Complete Details

STAINLESS STEEL SUBMERSIBLE DRAINAGE PUMP

Hand-carry submersible stainless steel automatic water pumps. Able to drain infiltrating water, cellars or reservoirs, clean or slightly dirty water and for garden irrigation.

View Complete Details

SUBMERSIBLE PUMP FOR DIRTY WATER

APPLICATION Submersible water pumps with back impeller suitable to lift waste liquids even with suspended solids. Able to drain infiltrating water, cesspools or reservoirs, decanting water and clean, dirty or muddy swimming pools. OPERATING CONDITIONS Submersion depth 5 mt. Grain size inlet - Ø 25 mm (TF 400 S). Grain size inlet - Ø 30mm. Min. suction level -Ø 40mm. MOTOR Built-in overload motor protector with automatic reset. Permanent split capacitor. Insulation Class F MATERIALS Handle Moplen. Pump body: Moplen. Impeller Noryl. Impeller (TF 1000 S) Brass. Motor casing Stainless Steel. Shaft with motor Stainless Steel. Double oil seal.

View Complete Details

Self Priming Monoblock Pump

APPLICATION Selfpriming monoblock water pumps with open impeller.The check valve inside the suction outlet avoids the syphon effect when stopping and assures the automatic re-start each time. The pump selfprimes even if partially filled and if the suction hose is completely empty. Suitable to drain clean or slightly dirty water and in flood irrigation systems. OPERATING CONDITIONS Max working pressure 10 bar. Total suction lift up to 7 mt. Continuous duty. MOTOR Electric standard motor(n = 2900 min-1). Insulation Class F. MATERIALS Pump body: Cast Iron. Motor Support: Cast Iron. Impeller Cast Iron. Shaft with motor Stainless Steel. Mechanical seal Ceramic/Graphite.

View Complete Details

Monoblock centrifugal pump

APPLICATION Centrifugal, monoblock and single-impeller electrical pumps with pump body, with connection to the motor by means of a support unit. These machines are ideal for pumping clean water and other chemically and mechanically non-aggressive liquids. These system can be installed in any position, provided the inlet opening faces upwards, and, thanks to their special design - which allows back pull out of the motor and the rotary parts of the pump and subsequent re-assembly without having to remove the pump body and the pipes connected to it - can be easily and conveniently used for a wide variety of applications in civil, agricultural, industrial or general plant uses. Water supply, spray or flowing irrigation, autoclave feed, high pressure system, heating, conditioning and any other general service requiring transfer of clean liquids. OPERATING CONDITIONS Max. working pressure 10 bar Total suction lift upt o 7 mt. Continuous duty. MOTOR Two-Pole induction motor (n = 2850 min-1). Insulation Class F. MATERIALS Pump body : Cast Iron with flanged inlet and delivery openings and threaded counter-flanges. Motor Support: Cast Iron. Impeller : Cast Iron. Shaft with rotor Stainless Steel. Mechanical seal Ceramic/Graphite.

View Complete Details

centrifugal irrigation pump

APPLICATION Centrifugal single impeller low head water pumps for flow irrigation systems with high flow rates. Suitable to pump clean water or non-aggressive liquids charged with small solid impurities.. To be used in flow irrigation systems in gardening and agriculture and in industrial fittings. OPERATING CONDITIONS Max. working pressure 6 bar. Total suction lift upt o 7 mt. Continuous duty. MOTOR Two-Pole induction motor (n = 2850 min-1). Insulation Class F. MATERIALS Pump body : Cast Iron. Motor Support: Cast Iron. Impeller : Cast Iron. Shaft with rotor Stainless Steel. Mechanical seal Ceramic/Graphite.

View Complete Details

TWIN IMPELLER CENTRIFUGAL PUMP

APPLICATION Selfpriming Twin impeller centrifugal water pumps for suction up to 8 mt. Suitable for civil and industrial purposes and to drain clean and soda water and non-aggressive liquid.. OPERATING CONDITIONS Total suction lift upt o 8 mt. Continuous duty. MOTOR Two-Pole induction motor (n = 2850 min-1). Insulation Class F. MATERIALS Pump body : Cast Iron. Motor Support: Cast Iron. Impeller : Noryl Or Bronze(BR). Diffuser: Noryl. Shaft with rotor Stainless Steel. Mechanical seal Ceramic/Graphite.

View Complete Details

self priming water pump

APPLICATION Selfpriming water pumps for deep suctions up to mt. 50 to be used in case of important water level gaps. Suitable to drain water from wells and in domestic fittings by small and medium sized tanks. Before installing the pump verify that all pipes (iron, plastic or rubber) are clean inside so to avoid any obstruction to the ejector nozzle. At the foot of the ejector must be installed a foot valve or a check valve. Installed the pump, fill completely both pipes and pump body with clean water. To preserve an efficient priming it is necessary a certain pression in the circuit, therefore it is recommended to install a membrane tank at the delivery of the pump.. OPERATING CONDITIONS Total suction lift upt o 50 mt. Continuous duty. MOTOR Two-Pole induction motor (n = 2850 min-1). Insulation Class F. MATERIALS Pump body : Cast Iron Motor Support: Aluminium. Impeller : Noryl. Diffuser: Noryl. Pump flange: Stainless Steel. Shaft with rotor Stainless Steel. Mechanical seal Ceramic/Graphite.

View Complete Details

SUBMERSIBLE PUMPS FOR DIRTY WATER

Submersible water pumps with back impeller suitable to lift waste liquids even with suspended solids. Able to drain infiltrating water, cesspools or reservoirs, decanting water and clean, dirty or muddy swimming pools.

View Complete Details

peripheral water pump

Peripheral water pump able to offer high pression in relation to comparatively low power and to have a particularly steady operating curve. Suitable for pouring of non aggressive liquids.

View Complete Details

AUTOMATIC WORKING PRESSURE SYSTEMS

Automatic high pressure groups coupled with selfpriming water pumps for deep suctions up to mt. 35 to be used in case of important water level gaps. They are very silent and reliable and particularly suitable to increase pressure from a water system, to supply water from wells and in domestic high pressure groups.

View Complete Details

SELF PRIMING JET INOX WATER PUMP

Selfpriming jet inox water pumps with a very high hydraulic performance and a considerable pressure capacity. Able to pump up to mt. 8 depth and work perfectly even in soda-water. Suitable for water lifting and distribution in domestic fittings and little irrigations.

View Complete Details

SUBMERSIBLE PUMP FOR DRAINING CLEAN WATER

The DRENOX series pumps are built entirely in AISI 304 stainless steel. Cooling of the motor is via a heat exchange chamber that allows the machine to work for long periods when not completely submerged. Equipped with Ø 32 mm hose adapter. Automatic version equipped with float switch.   Applications Drainage of seepage water, pumping of rain water, from a grating or drain, pumping of domestic waste water, drainage of environments, bathing and swimming pools, industrial applications. Fountains and water features. Surface irrigation. USAGE LIMITATIONS Type of liquid: partially effluent and dirty clear water, non-aggressive liquids. Maximum liquid temperature 40° C. Maximum submersion under the water level 7m. Minimum drainage level 3 mm for model 80/7, 35 mm for the other models (manual version) Free clearance of solids 3 mm for models 80/7, 6 mm for the other models MOTOR Dry motor with stainless steel casing. Level of protection IP68. Class F insulation. Single phase power supply with capacitor permanently activated and thermal protection built into the motor winding. Three phase power supply with external protection provided by the user. Completely insulated cable connection chamber. Self-lubricating ball bearings. Speed of rotation 2850 rpm.

View Complete Details

Horizontal multi cellular centrifugal pump

Horizontal, multicellular centrifugal pumps in the DHI range offer the following advantages: High hydraulic pressure and flow rate performance Minimum electrical energy consumption. Extremely quiet operation.   Applications Transfer of aggressive liquids Pumping and distribution of water in domestic appliances used on a continuous or intermittent basis Booster system For washing and irrigation system gardens and fountains USAGE LIMITATIONS Type of liquid: clean water free of suspended solids or abrasive material. Maximum liquid temperature 90°C. Maximum ambient temperature 50°C. Maximum recommended suction height: 6 m with foot valve (with max liquid temperature at 50° C). Maximum operating temperature: 10 bar (with liquid temp. 50°C) 6 bar (with liquid temp. 90°C) MOTOR Asyncronous Motor Enclosed, externally ventilated. Level of protection IP 44. Class F insulation. Single phase power supply with capacitor permanently activated and thermal protection built into the motor winding. Three phase power supply with external protection provided by the user. Rotation speed 2850rpm. Suitable for continuous use

View Complete Details

Centrifugal Pump VLR

The VLR are vertical multistage, in-line, centrifugal pumps, directly connected to an electric motor. They are not self- priming.   Application Water supply Pressure Booster Systems Irrigation High pressure washes Firefighting systems Boiler supply Liquid transfer APPLICATIONS MOTOR Asynchronous electric motor with enclosed stator and external ventilation Efficiency motor’s class IE2 Main dimensions are in accordance with DIN and IEC standards Design: V18-up to 4, 0KW V1- to start from 5, 5KW Class F insulation Level of protection IP 55 Maximum environmental temperature 40 ° Speed of rotation 2900 rpm Increased bearings to last longer VERSIONS AVAILABLE Impeller, diffuser and outside sleeve in stainless steel. Cast iron base, adapter and motor bracket. VLR 32 and VLR 66 are equipped with cartridge mechanical seal, in order to avoid a motor disassembling in case of replacement. A version with oval flanges, supplied complete with counterflanges. F with round DIN type flanges.

View Complete Details

ADRY THREE PHASE MOTOR STARTER

THREE PHASE STARTERS FOR THE CONTROL OF ONE OR TWO DRAINING AND SEWAGE ELECTRIC PUMPS   MAIN COMPONENTS IP 54 metallic case. General switch. Fuse block with fuses for the electric pump. Contactor with thermal relay. Transformer for auxiliary circuit. Fuse block with fuses on the auxiliary circuit. Electronic signalling, control and command card equipped with:. Function light. Power led. Thermal block light. Electronic keyboard with leds VOLT/ AMPERE. Terminal board with level control devices. Cable gland. TECHNICAL FEATURES Protection level : IP54. Power supply voltage : 400V 3F 50 Hz. External dimensions : 500 x 750 x 250 mm. TYPE OF FUNCTIONING Manual through general switch. Automatic through float switch. LIMITS IN USE Environmental temperature : -5 / +40°C. Relative humidity : 50% at 40°C (without forming of condense). Standards : EN 60335-1 - EN 60439-1. ADRY 20 Electronic signalling, control and command card equipped with cyclic startings converter For the control of two electric pumps. Weight : Kg 15-85 ADRY 10 Electronic signalling, control and command card. For the control of one electric pumps. Weight : Kg 15-85 OPTIONAL ACCESSORIES CE040030 - Panel wall mount fixing fins UZA00200 - Optical, acoustic alarm Float switches (see accessories table)

View Complete Details

Automatic DHR booster Pump set

Automatic booster set designed to increase home water pressure. Made up of a single phase DHR pump and of a FLUSSCONTROL electronic control and dry running protection device   Applications Pumping and distribution of water in domestic systems. Booster systems Washing systems, irrigation USAGE LIMITATION Type of liquid: clean water with no suspended solids or abrasive material Maximum operating pressure: 10 bar. Maximum recommended suction height: 6 m with foot valve. MOTOR Enclosed, externally ventilated. Level of protection: IP44. Class F insulation. Single phase power supply with capacitor permanently activated. Thermal protection built into the motor winding Speed of rotation 2850 rpm. Suitable for continuous use DESIGN FEATURES Starting pressure (not adjustable): 1, 5 bar - Liquid temperature: from 4°C to 65°C. – Power supply cable: 1, 5 m. H05 RN-F with schuko plug.

View Complete Details

SHARP Centrifugal Pumps

Thread Types and Flange Types The Centrifugal Pumps with single centrifugal impeller are suitable for pumping clear cold water and fluids which are not chemically aggressive. They are extremely reliable, simple to use, finding many uses in domestic and civil applications such as distribution of water from medium sized surge tanks, transferring water etc. The shape of the impeller transmits a radial motion to the fluid from the center outwards with minimum hydraulic l oss. The blades inside the impeller channel transfer energy to the fluid both in the form of pressure and in creased speed. After leaving the impeller the fluid passes to the volute and tapered diffuser which transform into pressure energy.   Salient Features High quality extruded aluminum body. Brass impeller - centrifugal radial flow type. Stainless steel motor shaft. Ceramic and Graphite Mechanical seal. Good suction capacities and high delivery rates.

View Complete Details

EHZ Float Switch

The flat switch EHZ-FS-E is used to control flid levels in tanks, wells or else. It is resistant to water (sewage water) and resists a wide range of oils, most acids and alkalis. Check the compatibility list for more detail. EHZ-FS-C is the version with crossover contacts.   Microswitch: 250V ~ 400 V ~ 10(8)A 10(4)A Switch lifetime: min. 50‘000 cycles VDE certifid protection: IP 68 Max. temperature: 60° C Working pressure: max. 0.1 bar. Contact rating: direct 1 KW at 250 V Casing: Polypropylene-Copolymerisate Cable: H07RN8F 3G1, 750V, 90°C , fie wire, EU certifid for extended submersion in water, H07RN8F 3x1 for FS-C type Cable: H07RN8F 3G1, 750V, 90°C , fie wire, EU certifid for extended submersion in water, H07RN8F 3x1 for FS-C type Dimensions: 156 x 88 x 42 mm (L x W x H) Product features Adjustable Easy to install Reliable Maintenance free

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Emirates International Equipment & Machinery Est.
  • P.O.Box 8132 , Dubai, UAE., dubai, United Arab Emirates