Dubai, United Arab Emirates
Write a Review
Our Products
Pharmaceutical Tablets
2 Products availableCosmetics, Hair Care & Beauty Products
2 Products availableDye Additives
1 Products availableCatalysts And Absorbents
1 Products availablePharmaceutical Containers
1 Products availableMetal Drums
1 Products availablePetrochemicals & Petroleum Products
1 Products availableClay
1 Products availableWe offer a complete product range of Automotive Grease, 2 T Oil Additives, Base Oil (Virgin and Recycled), Thermic Oil Additive and E. P. Additive for Gear Oil
| Characteristic | Test Method | Requirement | Typical Test Data |
| Consistency of the worked grease at 250 0.50c: a.) 60 double strokes | D-217 | 220-250 | 235 |
| Free Organic Acidity (As Oleic Acid) % by mass, Max. | IP-37 | 0.2 | Nil |
| Free Alkalinity (As LIOH), percent by mass, Max | IP-37 | 0.2 | 0.05 |
| Drop point, 0c, Min | D-566 | 180 |
192 |
| Kinematic viscosity of mineral oil cSt 1000c min. | D-445 | 9-13 | 11 |
| Copper strip corrosion, at 100 0c for 24 h. | IP-112 | Negative |
Passes |
| % with Oil separation on storage 18 hours @40 deg. C | ___ | 4.0 max. | ___ |
| Leakage tendency Wheel Bearing test Wt. % Max. (Typical) | ___ | 5.0 | 5.0 |
| Oxidation stability drop in pressure kg. f/cm 2, (100 hrs ) | ___ | 0.5 Max. | 0.5 |
| this di package contains dispersant, detergent, antioxidant, corrosion inhibitor along with defoamer, metal passivator of selected chemistry to meet the requirements of petrol engine performance. |
| at suitable dosages along with low molecular weight viscosity modifier and suitable solvent it covers the requirement of jaso fc and is 14234 - 1996. |
The purity of base oils means that your additive packages can be optimized to meet performance objectives at lower treat rates and reduced cost. Your formulators won't have to worry about compensating for the quality of the base stock in your finished products. You have more freedom in new product development. Our Base oils can improve the performance of your finished engine oils and other lubricants. Better viscosity control and reduced volatility help cut lubricant consumption and provide fuel economy benefits. This also enhances cold start operation. Your customers can expect improved equipment protection and extended lubricant life due to superior oxidation and thermal stability.
Advantages
|
| Property | Value | Test Method |
| Color | 2.5 to 3.5 | ASTM D98/1500 |
| Specific Gravity | 0.87 to 0.89 | ASTM D96/4052 |
| Viscosity @ 100 Deg C | 9.5 to 11.5 | ASTM D96/445 |
| Viscosity Index | Min. 95 | ASTM D93/2270 |
| Pour Point | 0 | ASTM D97 |
| Flash Point | Min 205 | ASTM D92 |
| it has been formulated to give excellent thermic fluid characteristics to cover a broad range of heat transfer applications. The product should be blended with highly refined base stocks by using special refining techniques. |
| performance |
| when formulated with proper base stocks gives excellent chemical and oxidation stability with good heat transfer properties. It is non toxic and non corrosive. |
| dosage:1.0 % w/w in proper viscosity and type of base oils. |
| It has been specially formulated to give excellent antiwear and extreme pressure properties along with thermal, oxidation and rust characteristics (covering copper and copper alloys) to cover a broad range of applications of gear oil applications. It should be blended with highly refined base stocks to meet API GL4, GL5, GL2 and IS 8406 (1993) when blended in suitable base stock & desired viscosity grades. | |||||||||||
| Performance: Lubricants formulated with this additive package work for heavy duty enclosed gear drives with splash and circulatory type lubrication systems under heavy shock load conditions. It also gives dependable performance for continuous service at operating temperature upto 160 C. It is also useful for antifriction bearings subjected to heavy shock loads.
|
Mr. Ankit Agrawal (Excellence International Fzc)P. O. Box 46796, Dubai - 100074, United Arab Emirates
Share us via
