Sharjah, United Arab Emirates
Our Complete range of products are leak detection systems, Manholes, Tank fuel management system, fuel cabinet dispensers and Emergency Shear valves.
Leak detection systems working on various principles are available to suit your specific application. Instruments for monitoring leak in double wall tanks, sumps, monitoring wells, access chambers, bunds and pipe lines and are widely recommended nowadays considering the environmental aspects. Leak monitoring systems with upto 16 sensors and different communication protocols and outputs are available. Systems working on different principles of operation such as simple float type sensors to more complex thermistor sensors to pressure and vacuum operated devices are part of our wide range of environmental equipment. Different models are available to suit underground/ above ground tank applications and hazardous environments as well. Modular systems for double wall pipe leak detection is also available from simple to complex configurations depending on the number of independent lines to be monitored.
Manholes are available in cylindrical or square shapes for access to underground equipment from grade level. Monitoring well manholes provides access to monitoring wells where proper identification of opening is essential. Lightweight manholes are encapsulated in a new high performance material. The morrison engineered laminate has been encapsulated with long life, tougher than a bedliner, polyurea elastomer, built for moisture protection and chemical resistance.
Tank management systems are modular, multi-tank gauging systems w/ EPA-compliant in-tank and secondary containment leak detection. These systems are essential part of bulk storage systems to monitor and control the facility locally and remotely. Designed to meet environmental compliance and inventory management needs with a simple user interface, these systems combine precision performance with scalability, sophistication, customization and ease of use. It accurately delivers crucial information on-site or remotely when you need it – during busy dispensing periods in fuel stations, when scheduling deliveries, when reconciling fuel variances
An extensive line of fuel pumps and cabinet dispensers provide dispensing solution for virtually every application. Combined with mechanical or electronic meters depending on the need, we offer a range of solutions to suit your dispensing need. Systems with integrated fuel management systems provide a very cost effective solution for small scale industries that need total control of their fleet fueling.
Shear valves are installed in-between the dispenser and product supply line at grade level minimizing collision and fire hazards at the dispenser. If the dispenser is pulled over or dislodged by collision, the top of the valve breaks free at the integral shear groove, activating poppets that shut off the flow of fuel.
Tank sumps provide access to the tank itself, to clean and provide dry environment for maintenance and service. They function as a liquid-tight isolation container providing secondary containment for the tank fittings, valves and pumps. Dispenser sumps are installed beneath fuel dispensers to provide access to emergency shear valve and plumbing.
We offer a wide range of pumps suitable for the transfer of liquid and gas products in a variety of industries including LPG, Chemical Processing, Refined Fuels, Petroleum, Food & Sanitary and the Mobile Transport industries. Pump packages designed for custom applications are built with control panels which has extreme flexibility in handling different process requirements. The package typically consists of a suction strainer, isolation valves, non-return valves and pressure and vacuum gauges. Controls range from simple motor starters to highly integrated touch screen based interfaces. Different protocols for communication with building management systems are provided. High efficiency pumps are available for continuous duty applications and to handle liquids of a wide range of viscosities. Truck Pumps for handling fuel oil, diesel, kerosene, gasoline, avgas, jet fuel, and light lube oils are available with dual shafts which simplify installation. These pumps are easy to maintain and gives a very reliable performance over the years. We also carryout installation of the pumps and flow meters in trucks to customer requirement. Hand Pumps provide a safe, convenient method of dispensing or transferring non-corrosive liquids from drums, barrels, tanks or vats. They are designed for easy, efficient operation in handling a wide range of liquids in industrial, construction and agricultural applications.
Flow meters are available in different capacities and accuracy levels. Starting from simple cost effective positive displacement meters, we offer complex, high accuracy and high performance meters for batching, blending, process control, and dispensing of liquid products in all liquid-handling industries. These are available with different accessories like air eliminator, printer, preset counter etc. Consistent performance over varying operating conditions is the key feature of the high performance meters.
Normally open and close type valves are used to control the flow of fluids in pipelines. Ranging from from 1/2" to 3", solenoid valves are available in different seat materials to suit various applications. Different enclosure ratings such as weather proof, water proof and explosion proof are possible. DC and AC versions of coils in UL Listed versions are also available.
Fire valves are used to shut off the flow in the event of fire. Accessories to activate remote functionalities like raising an alarm or deactivating the pump etc. are also available to use with the valves. These are available in various types ranging from simple spring loaded internal/external emergency valve to dead weight fire valve and free fall fire valve which operates with the help of fusible link. Electro-thermal fire valves with FM approval, are available with limit switches. These valves close the fuel flow with a signal from an external source such as fire alarm system.
Actuated ball type valves are specially designed to use with Diesel and Biofuel. The range is available from 1/2" to 3" full or reduces bore. Valve motor open times are generally 90 seconds, with spring closure between 16 and 20 seconds. Manual override and limit switch are available as options. Actuators are available with 12-24V DC or 230V AC Voltage options. Available in various configurations such as motor open/ motor close, Motor Open/Spring Close or Motor Close/Spring Open. Fail-safe mechanism to open or close the valve in the event of a power failure is also possible with certain actuators. This is generally used in seismic applications where an valve works as a seismic shut off valve working through a seismic switch.
Strainers are used to remove foreign matter from pipe lines and provide inexpensive protection to pumps, meters, valves, etc. Available in different styles, like Y, basket, T etc, they are suitable for a wide range of applications. Cast iron, Carbon steel and Stainless steel and bronze bodies are available with SS basket. Baskets are available in various sizes perforation sizes depending on the application. Basket strainers are mostly of single or double basket type. Duplex type comes with a built in 3 way diverter valve.
Filters suitable to use with gasoline, diesel & bio-fuels (biodiesel & ethanol) for particulate and water removal are available in different flow ranges for industrial and commercial applications. Simplex and duplex filter adaptors are available for single and multi-level filtration. Hydrosorb filters absorb water particles in fuel and provide clean and moisture free fuel for consumption. Particulate filters are available in 30 & 10 microns.
Level switches are used to provide volt-free contacts for various control functions based on level of the tank. These are available in different types and mounting styles and to suit almost every application. Functions such as to control pump and valve, signal filling levels and for PLC applications. Available in different mounting styles such as horizontal and vertical, with single to multiple switches in different float materials like buna, stainless steel, polypropylene etc.
Electronic tank gauges consisting of sensor and remote display/control unit are widely used in the industry for precision measurement of tank levels and providing level alerts. Units are available with external relay output and 4-20mA analog output. Sensors include simple pressure transmitter to more complex devices such as ultrasonic, capacitance, magnetostrictive and radar level transmitters for more sophisticated applications. our wide range of level sensors include • Capacitance level indicators and controllers • Capacitance level switches • Conductivity level switches • Vibrating type level switches • Rotary paddle switches • Thermistor type level sensors, overfill prevention systems and PTC thermistor type level controllers Level • Pressure transducers for hydrostatic level measurement • TDR Micropulse Level indicators • Non-contact ultrasonic level indicators • Level warning instruments for oil/water separators and grease traps • Display and evaluation units • Event reporting systems
Internationally accepted and specified by oil companies around the world to assist with the safe conveyance of petroleum based products, our range of lightweight aluminum manhole covers offer unrivalled safety features and operational benefits. Left handed and right handed versions to suit the application requirements are available.
Emergency valves for tank trucks are available in sizes ranging from 2" to 4" in various styles and connections to suit your application. Mechanically and pneumatically operated types most commonly used in tank trucks in this part of the world are available readily in stock and special designs are ordered on demand. Lever operators for single to 5-compartment takers in powder coat finish with trip levers are part of our inventory.
Truck pump are used to load, transport, unload, and meter petroleum, chemicals, crude oil, food grade liquids, gases, lube oils, jet & diesel fuels, propane and gasoline. From thin liquids and liquefied gases to viscous products and abrasive materials we offer pumps for a wide range of truck-mounted applications. With a variety of construction materials and shaft sealing options we offer variety of products to boost productivity, lower operating cost, and reduce maintenance downtime. Pumps with horizontal parallel porting that can offer installers easier piping connections than pumps with 90-degree ported pumps Double-ended drive shaft for either clockwise (RH) or counterclockwise (LH) rotation also provides flexibility when it comes to installation and pipework. T-type strainers are available to protect pumping systems from damage caused by welding slag and foreign matter in the piping and tanks.
Camlock couplings Camlock couplings or cam and groove couplings form the end connection of discharge and fill lines of bulk loading and unloading lines. Couplings from 1"-8" size are available in aluminum, SS or brass material. Vapor recovery adapter Vapor recovery adapters are designed to minimize pressure drop and maximize the efficiency of the recovery of petroleum vapors during tanker loading and unloading operations. They incorporate a lightweight aluminum construction for increased payload and reduced maintenance. Multi-compartment loading at high flow rates with vapor return is possible without exceeding P/V vent pressure ratings. API Adapters API Adapters are the road tankers connection valve for filling at the loading rack and for unloading by hose at the service station. They are designed to incorporate maximum safety, high flow, low-pressure drop, easy maintenance and offer a long service life. The simplicity of their design makes them ideal for oil companies and transporters of petroleum products. Gravity Drop Adaptors , specifically designed for use with API adaptors when discharging product are available in standard sizes.
Vapor transfer vent fitted to the Manhole Cover, provides the means to transfer displaced vapors to and from the tanker. Air operated and sequenced with emergency valve, they ensure vapors are transferred safely during loading and unloading. Vapor Transfer Vents have been designed to incorporate maximum safety, high flow, low-pressure drop, easy maintenance and offer a long service life. The simplicity of their design makes them ideal for oil companies and transporters of petroleum products. Coaming/Vapour Line Vent Valve High Flow PV Vent provides pressure venting to atmosphere, for the tanker vapour line when it is not sealed, for vapour transfer. The pneumatic cylinder seals the vent when vapour transfer is required.
Our most complete product line includes spring retractable hose reels, cord reels and cable reels; hand crank hose reels, cord reels, and cable reels; electric cord reels for power and light; motor driven hose reels, cord reels and cable reels; large frame hose reels; custom designed and built hose reels, cord reels, cable reels and storage reels; and industrial grade reels for military use. Many other options are available. Ready to use hose reel assemblies with nozzle, swivel and ball stopper are readily available in 1 & 1 1/2" size with 15m hose.