Larsa Lighting

Dubai, United Arab Emirates

Larsa Lighting offers a range of unique table lamps / table luminaires that add a sensitive combination of technology, materials and design to any space, creating stunning results.

Decorative home lighting can refer to any lighting used in the home that adds aesthetic appeal to the home as well as functional lighting. Some types of decorative home lighting are more functional than others; holiday lights, for example, are generally purely decorative without adding much additional light to the home. Lamps, ceiling fixtures, or other types of lighting can add equal amounts of functional light and decoration to the home.

When people are choosing lighting for their homes, they typically choose decorative home lighting because it can add to the value and aesthetic appeal of a home. This is as opposed to lighting that is purely functional, such as lights mounted under cabinets, or large fluorescent light fixtures that are most often used in offices or other business buildings. Freestanding lamps are some of the most common types of decorative home lighting.

These may be short table lamps or larger, freestanding floor lamps. Lamps featuring glass shades tend to be more expensive, and fabric or paper shades are somewhat more common. Changing the lamp shade of a lamp is an easy way to change both the look of the lamp, and the look of the whole room. A mixture of lamps in different sizes is a good way to add interest to a room as well

A recessed light is a light fixture that is installed into a hollow opening in a wall/floor/ceiling. When installed it appears to have light shining from a hole in the wall/floor/ceiling, concentrating the light in a downward direction as a broad floodlight or narrow spotlight.

There are two parts to recessed lights, the trim and housing. The trim is the visible portion of the light. It is the insert that is seen when looking up into the fixture, and also includes the thin lining around the edge of the light. The housing is the fixture itself that is installed inside the ceiling and contains the lamp holder.

Application:

• Can be installed in any project where quality of products and low energy are required
• Lights for installation in shops, offices, hotels, etc.

Larsa Lighting is one of the leading suppliers Islamic lights used in the Middle East.

Applications:

• Museum of Islamic Art
• Mosque

Product Range include

• Modern
• Classic
• Sand Casting &
• Lost wax casting

Steam room lights are Led lights, rated IP67. The selection includes various crystal lights, sconces and traditional downlights.

Sauna lighting systems are the most comprehensive and advanced solutions in the market. Our product range includes standard sets for Sauna seat and ceiling illumination as well as fibre optic sets with various effects. We also have a wide range of Sauna fibre optic fittings. With fibre optic illumination the possibilities are unlimited.

Bathroom creations, in place of traditional light fixtures, Leds illuminate soap cups, toilet paper holders and towel hooks

With optic fibres light can be taken everywhere. There is no electricity or heat in the fibres, there is only light. When producing a fibre bundle the projector end is hermetically sealed to keep the fibre clean and later prevent it from melting. The projector end is protected with a thermal protection filter. All fibre joints and endings in the fibre bundle are made without adhesives using the so-called dry polishing method which gives the best light conductivity performance on the market.

Functional lighting guarantees the adequate quantity of light required for comfort and to ensure the safe use of exterior areas, such as car parks, entranceways, passageways and paths. Diffused lighting is usually preferred to guarantee evenness in lighting all areas and surfaces. Access routes must be properly lit and direct or indirect glare should be avoided by performing thorough light engineering tests. It is therefore essential to assess the triangulation between an observer, the light source and reflective surface.

The light engineering design will then identify the perfect solution to make full use of the areas and routes within the reference settings, without altering the general look and lighting quality of all the areas. The use of direct lighting and LED light sources moreover ensures significant energy saving and reduced maintenance.

Functional lighting guarantees the adequate quantity of light required for comfort and to ensure the safe use of exterior areas, such as car parks, entranceways, passageways and paths. Diffused lighting is usually preferred to guarantee evenness in lighting all areas and surfaces. Access routes must be properly lit and direct or indirect glare should be avoided by performing thorough light engineering tests. It is therefore essential to assess the triangulation between an observer, the light source and reflective surface.

The light engineering design will then identify the perfect solution to make full use of the areas and routes within the reference settings, without altering the general look and lighting quality of all the areas. The use of direct lighting and LED light sources moreover ensures significant energy saving and reduced maintenance.

Functional lighting guarantees the adequate quantity of light required for comfort and to ensure the safe use of exterior areas, such as car parks, entranceways, passageways and paths. Diffused lighting is usually preferred to guarantee evenness in lighting all areas and surfaces. Access routes must be properly lit and direct or indirect glare should be avoided by performing thorough light engineering tests. It is therefore essential to assess the triangulation between an observer, the light source and reflective surface.

The light engineering design will then identify the perfect solution to make full use of the areas and routes within the reference settings, without altering the general look and lighting quality of all the areas. The use of direct lighting and LED light sources moreover ensures significant energy saving and reduced maintenance.

Functional lighting guarantees the adequate quantity of light required for comfort and to ensure the safe use of exterior areas, such as car parks, entranceways, passageways and paths. Diffused lighting is usually preferred to guarantee evenness in lighting all areas and surfaces. Access routes must be properly lit and direct or indirect glare should be avoided by performing thorough light engineering tests. It is therefore essential to assess the triangulation between an observer, the light source and reflective surface.

The light engineering design will then identify the perfect solution to make full use of the areas and routes within the reference settings, without altering the general look and lighting quality of all the areas. The use of direct lighting and LED light sources moreover ensures significant energy saving and reduced maintenance.

Functional lighting guarantees the adequate quantity of light required for comfort and to ensure the safe use of exterior areas, such as car parks, entranceways, passageways and paths. Diffused lighting is usually preferred to guarantee evenness in lighting all areas and surfaces. Access routes must be properly lit and direct or indirect glare should be avoided by performing thorough light engineering tests. It is therefore essential to assess the triangulation between an observer, the light source and reflective surface.

The light engineering design will then identify the perfect solution to make full use of the areas and routes within the reference settings, without altering the general look and lighting quality of all the areas. The use of direct lighting and LED light sources moreover ensures significant energy saving and reduced maintenance.

Functional lighting guarantees the adequate quantity of light required for comfort and to ensure the safe use of exterior areas, such as car parks, entranceways, passageways and paths. Diffused lighting is usually preferred to guarantee evenness in lighting all areas and surfaces. Access routes must be properly lit and direct or indirect glare should be avoided by performing thorough light engineering tests. It is therefore essential to assess the triangulation between an observer, the light source and reflective surface.

The light engineering design will then identify the perfect solution to make full use of the areas and routes within the reference settings, without altering the general look and lighting quality of all the areas. The use of direct lighting and LED light sources moreover ensures significant energy saving and reduced maintenance.

Functional lighting guarantees the adequate quantity of light required for comfort and to ensure the safe use of exterior areas, such as car parks, entranceways, passageways and paths. Diffused lighting is usually preferred to guarantee evenness in lighting all areas and surfaces. Access routes must be properly lit and direct or indirect glare should be avoided by performing thorough light engineering tests. It is therefore essential to assess the triangulation between an observer, the light source and reflective surface.

The light engineering design will then identify the perfect solution to make full use of the areas and routes within the reference settings, without altering the general look and lighting quality of all the areas. The use of direct lighting and LED light sources moreover ensures significant energy saving and reduced maintenance.