LIFECO

Dubai, United Arab Emirates

• Suitable for mounting on a normally flammable surface
• Battery Discharge Protection
• Test Button
• RED LED indicator indicates battery charging mode.
• Suitable for indoor use, wall or ceiling mounted.

• Single input contact monitor
• Fast, reliable contact monitoring utilizing the LIFECO DCP (Digital CommunicationsProtocol)
• Two different mounting configurations
• 127 devices can be used per DCP loop
• Bi-colored indicating LED provides module status (Both Models)
• Yellow LED indicates a short circuit condition (LE-FRCMA-I only)
• Can be programmed to monitor Normally Open (NO) or Normally Closed (NC) contacts inClass B
• Operates on Class A or Class B SLC loop
• Accepts up to 14 AWG wire
• UL 864 Listed

The LIFECO LE-DCP-FRCMA/-I Fast Response Contact Monitoring Modules are designed to be used with pull stations, water flow switches, and other applications requiring the monitoring of dry contact alarm initiating devices. The interrupt driven Digital Communications Protocol (DCP) combines maximum communication reliability and fast response to emergency conditions. Two different mounting configurations are provided to meet a wide range of applications. The LE-DCP-FRCMA/-I contact monitoring module does not require a separate 24 VDC power source.

• Fusible Ally Type
• Standard Spray Pattern
• K-factor 5.6
• Quick & Standard Response
• 12 NPT Thread Size

The 1/2 inch orifice LIFECO LF721 Quick Response and 1/2 inch orifice LIFECO LF720 Standard Response Flush Sprinklers are automatic sprinklers of the fusible solder type. They are Quick response-Standard orifice spray Sprinklers intended for use in fire Sprinkler systems designed in accordance with the Standard installation (NFPA 13). They produce a hemispherical water distribution pattern below the deflector. They share basically the same functional principle with other standard response glass bulb sprinkler. Nevertheless, it is designed a low profile, aesthetically pleasing, ceiling mounted sprinkler that offers a high degree of protection for human life.

• Pressure: Hydrostatically tested to 24 bar Non-return valve tested to 22.5 bar
• Inlet: 65 mm male instantaneous coupling to BS 366, non-return valve, blanking caps and chain, copper alloy parts, with brass springs and stainless steel lock-nut & washer
• Compact design with excellent flow characteristics
• High quality casting finishes
• Adjustable Relief Valve
• 25 mm drain valve with blanking cap and chain
• Maintenance free
• Vertical or horizontal mounting
• Flange Size: PN16 to BS 4505
• Breeching Inlet Body: Cast Iron
• Valve Standards: Manufactured in accordance with BS 5041 : Part 3 : 1975

LIFECO breeching inlets are used in a buildings for firefighting purposes, fitted with inlet connection at fire brigade access level and outlet connection at specified points, which is normally dry but capable of being charged with water by pumping from fire service appliances.

2-Way and 4-Way Breeching Inlet body is made of spheroidal graphite iron according to BS 2789 or Cast Iron to BS 1452. The outlet flange is according to BS 4504 and inlet is according to BS Instantaneous Male.

These are intended to be used by the fire brigade to provide them readily available means of water in considerable quantities to prevent the spread of fire.

• Top Centreline discharge
• Foot Supported Casing
• Back Pull-out Design
• Self-Venting Design
• Efficiently Designed Shaft
• Frame-mounted Design
• Small Footprint ideal of retrofit
• Dynamically Balanced Impeller
• Heavy Duty with Heavy Wall Thickness
• 100% Hydro static & Performance Tested
• Back Pump Out Vanes

LIFECO GMAXEnd Suction pumps are all Front supported, centrifugal volute pumps with axial suction port, radial discharge port and horizontal shaft. The LIFECO end-suction range comprises a complete series of pumps in full compliance with UL and FM Standards.

The pumps are of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework.

The LF/EX Fire Alarm and Gas extinguishing Control Panel is manufactured based on advanced technology while maintaining high quality during assembly. It is of solid state circuitry and is designed and tested to meet the requirements of industrial or commercial applications. It provides operator interactive control of the fire alarm and gas extinguishing system. Push buttons are provided on the front fascia for manual/automatic modes of extinguisher operation, first stage alarm, silence and reset. The LF/EX is interfaced with two detection zones of a conventional fire alarm panel which are utilized to provide double knock (coincidence) detection throughout the gas protected area. A callpoint situated on the front of the unit can be operated to manually release the extinguishant. It has multi-colored LED indicators for easy reference of fault isolation. For security purposes, the Control Panel is fitted with a control key switch which locks all the push-button functions so only authorized personnel would be allowed to operate the system.

• 1000 Point Address Monitoring
• LCD Screen Display
• Up to 30 Repeater Panels per System
• Easy Installation (Wall-mounting)
• Small Size
• User Friendly
• 4-wire connection
• Low Power Consumption
• LED Status Indicators
• Internal Sounder with Silence Button

The LF-6150 Repeater Panel is responsible for replicating fire and trouble information of a specific region from the Fire Control Unit. The device can monitor the alarm or the trouble state of 4 loops with up to 508 addressable points at most and display its information. Fire alarm and Fault alarm LEDs are provided to indicate the status of the monitored devices and the communication between the repeater and the Main Control Unit.

• Glass bulb
• Standard Spary Pattern
• K-factor 5.6
• Quick & Standard Response
• Available Temp. Rating: 135F / 155F/ 175F / 200F / 286F

The LIFECO Standard and Quick response sprinklers are thermo sensitive glass bulb sprinklers available in different finishes and temperature ratings to meet design requirements. These sprinklers are sidewall standard spray pattern to meet approval agencies requirement. Especially, the Nickel-Chrome plated sprinklers are decorative and attractive, so it is well matched to customer interior decoration. In addition, Nickel-Chrome plating might be utilized to extend the life of copper alloy sprinkler, although it has passed the standard corrosion test.

• EN3 Kitemark approved by BSI in the UK and CE marked
• High fire ratings offering maximum firefighting ability with minimum size and weight
• Nonconductive and safe on electrical equipment and fires
• Revolutionary new CE aluminium valve design
• Specially designed nozzle for optimum discharge accuracy & time
• Available in 1, 2, 3, 4, 6, 9, 12 kg and cartridge models and High Performance versions

ABC Powder works by firstly applying a coating to the fire which acts like a blanket suffocating the fire. Nitrogen (an inert gas) which is released during the process assists in suffocating further, while simultaneously tackling the chemical reaction of the fire, preventing the heat being formed and thereby cooling the fire.

• Easy to install
• Simple and compact
• Light to handle
• Automatic or manual operation
• Hose available in red or black color
• Choice of two sizes 25mm & 19mm

LIFECO hose reels have an extensive range of swinging & fixed type with manual & automatic operation to suit any architectural and installation requirements.

Hose reel discs are made of 1.2mm pre-treated electrogalvanized steel sheet, painted with electrostatic powder coating and oven baked at 200C. Hose reel side plates are protected with a polyester powder coating that complies to salt spray test requirement which is specified in ISO 9227 for 240hrs. Hose reel drum has formation of hydraulically pressed ribs to give extra strength and to avoid twisting. The outer edges are rolled over to give a safe handling edge on the outer rims and better appearance. Automatic fire hose reels are available with an internal valve built into the hose reel unit which opens within 3 revolutions of the hose reel as the hos e is pulled out and closes when the hose is wound back to the reel.

• Easy to use
• Easy to install
• Lightweight

LIFECO Fire blankets are ideal and highly effective for fighting fires involving flammable liquids such as cooking oils. They can also be used to wrap round people whose clothing or hair is on fire. These are manufactured from glass fiber and coated with flame retardant silicone rubber. They are available in different sizes to suit the requirements.

• UL Listed
• Available sizes: 1 and 2 inch.
• Adjustable fog, straight stream and shut off
• Finish: Brass and Chrome
• Thread: NST
• NST to BS336 male adaptor available if required.
• Nozzle pressure: 100 psi
• Discharge GPM as in UL listing

Adjustable nozzle are used for Class A and B fires in most industrial applications. They are used with lined fire hose. Adjustable fog, straight stream and shut off.

• Volute type Thru-Bore Casing
• Horizontally Split Casing Design
• Efficiently Designed Shaft
• Frame-mounted Design
• Small Footprint ideal of retrofit
• Dynamically Balanced Double Suction Impeller
• Heavy Duty with Heavy Wall Thickness
• 100% Hydro static & Performance Tested
• Removable stuffing box

LIFECO GMAXsplit case pump is a single-stage, Volute type Thru-Bore Casing pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipe work. The independent bearing housing allows for ease of maintenance without removing the top casing. The double volute design reduces the radial load on the shaft, extending component life, minimizing vibration and providing quiet operation.

• UL 864 9th edition Listed
• 2 loop (LE-FN-2127 Series) or 4 loop (LE-FN-4127 Series) versions
• Analog design using LIFECOs advanced DCP protocol for fast and robust communication
• Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of 254 points possible per loop
• Uses standard wire, no shielded or twisted pair required on SLC loops
• Supports Class B (style 4) and Class A (style 6 or 7) SLC loops
• 4 on board Class B (style Y) NAC circuits rated at 2.5 Amps each
• Programmable sensitivity levels per device & automatic day/night sensitivity modes
• Automatic daily calibration & drift compensation routine
• Large 8-line x 40-character LCD display (320 char.)
• Dual RS-485 bus for panel network
• 2 built-in RS-232 interfaces for programming via a PC and serial printer interface
• 5 on board programmable Form C relays rated at 1 amp at 30VDC (Fire1, Fire2, trouble, supervisory, aux.)
• 500mA of auxiliary power available rated at 24 VDC
• Loop Explorer Windows configuration utility
• 500 network wide software zones
• Network Capability of up to 64 panels
• RS485 slave bus for expansion up to 32 LE-FN-4127-IO boards or up to 15 LE- FN-LCD-S serial annunciators and up to 17 LE-FN-4127-IO boards
• Auto-learn feature
• Fire Drill test function
• Walk Test function
• Alarm Verification feature
• Operates on 120VAC or 240VAC input voltage
• Powerful & versatile Cause & Effect programming (up to 500 maximum, network wide) including:
• Cause & Effect action
• Disable function configuration
• Test mode configuration

The EAGLE SERIES control panel is an analog addressable fire alarm panel containing 2 or 4 SLC loops with each loop supporting 127 devices of any combination (sensors or modules), and 127 analog sounder bases, for a possible total of 254 points.

Communication between devices is transferred through standard cable (shielded or twisted pair is not required). Each panel includes a 5.25 amp power supply and has 4 on board NAC circuits. An RS-485 bus provides communication to the panel network, while the RS-232 interface allows the convenience of programming via a PC.

The system will support a variety of LIFECO devices: photo, ion and heat sensors, which contain a unique, patented sensor design incorporating automatic drift compensation and day/night sensitivity mode. Additional devices include contact monitors, relay controllers, supervised auxiliary output and short circuit isolator modules. In addition, interfaces to conventional detection systems can be established by using a conventional zone-monitoring module.

The Loop Explorer Windows Software interface provides the installer with fingertip access to installation programming and diagnostic tools.

An Auto-learn feature offers the convenience for quick start applications. Add to this a reputation for high quality and dedicated service makes this an exceptional product both in performance and value.

• Heavy duty construction for optimum abrasion resistance.
• Weather, ozone and ageing resistant with long service life.
• Easy to repair, clean and maintenance.
• The breaking strength of the jacket threads meets the requirements of UL 19.
• The tensile strength and ultimate elongation of inner lining meets UL 19 requirements.
• Hose is designed to withstand 1 times the service pressure without rupturing or breaking any thread in the jacket as per UL 19.
• Hose comes with attached couplings, Brass or Chrome Finish as per request.

LIFECO UL Listed Single and Double Jacket Synthetic Fire Hoses are lined with a high-tech EPDM tube whose engineered design guarantees minimum weight with maximum durability and flexibility. The polyester construction is mildew & rot-proof, tough, dependable, light weight and with outstanding abrasion resistance with our innovative Wisentec coating,

The jacket is evenly and firmly woven and free from visible defects, thread knots, lumps and irregularities of twist. The most common use of these fire hoses are for exterior fire protection and are also used by Fire Brigades.

• Suitable for mounting on a normally flammable surface.
• RED LED indicator indicates battery charging mode.
• Suitable for indoor use, wall or ceiling mounted.