SHARJAH, Sikkim, United Arab Emirates
Our Complete range of products are Padlock Caddy, Padlock Station, nylon shackle safety padlock, Safety lockout padlock and Multi-Purpose Cable Lockout.
This cable lockout has been ergonomically designed to fit the hand, making placement and use fast and simple. Route the cable where necessary to lockout the device then feed the cable down the centre of the open lockout. When the cable is tight and the source is locked out, squeeze the handle closed and apply padlock. Available in vinyl coated steel and nylon cable versions.
This unique cable lockout has an integral rewinding mechanism, pulling the cable taut once it has been routed to lockout the equipment. It can house up to 2 padlocks of a maximum diameter of 7mm. Dimensions: 110 x 110 x 40mm Cable diameter: 2mm
A heavy duty cable lockout that can be applied to large valves. Suitable for the most extreme weather conditions including offshore installations. Thanks to its all metal construction and stainless steel nut this lockout provides reliable and corrosion resistant use. Please note that the stainless steel cable is supplied separately.
Manufactured from polypropylene, the hexagon design opens up in two halves and is suitable for all kinds of industrial plugs. The small can accommodate 2 padlocks where as the large can accommodate 4. Both lockouts can house padlocks with a shackle diameter of 7mm or less.
Designed to fit on the largest circuit breakers. Turn the circuit breaker into the off position and place the lockout over the toggle switch. Tighten the screw thread to the toggle with the integral pedal sitting into the housing of the breaker to prevent removal.
Manufactured from glass resin polycarbonate, this lockout unit fits around the stem of a button which can then be locked out using a standard padlock. This unit can be fixed either permanently or on a temporary basis. To fit permanently, use the circular section around the stem of the button and shut the cover in place when needed.
Manufactured from industrial reinforced polystyrene, the unit has been developed to completely enclose electrical plugs to prevent a machine being energized. The small unit is suitable for a variety of electrical connections up to 40mm diameter. Suitable for up to 4 safety padlocks. The large unit is suitable for standard and larger electrical plugs, including 3 phase connectors. It also has 4 holes of 3 different sizes suitable for pneumatic male air hose connectors. Suitable for up to 4 safety padlocks.
Ensure vital equipment cannot be accessed by locking off the socket at the wall outlet. This lockout is suitable for standard UK single sockets, and can be used for switches, power sockets, network points etc. To fit, isolate the power to the outlet, loosen the screws and place the cover behind the faceplate. Re-tighten the screws pulling the cover into place. Please note that the cable gaps are located at the side and may not be suitable for thicker/rigid cables. To use cover with plug sockets, turn the cover 90 degrees. Up to two padlocks can be fitted integrally to the unit.
Designed for 3 phase breakers, this large lockout fits over the switch and then the screw is tightened using the clock style section. When tight the clock section is locked to the main body through the attached sliding section. Will accept 3 separate padlocks with a shackle diameter up to 8mm.
For use on medium sized circuit breakers. Turn the circuit breaker into the off position and place the lockout over the toggle switch. Tighten the screw thread to the toggle with the integral pedal sitting into the housing of the breaker to prevent removal. Maximum toggle width: 20mm
Ideal for use with power supplies of computers and similar devices. This lockout inserts into the back of the power supply and the circular paddle is then rotated to lock the device in position. A padlock can then be used to prevent the device being removed.
Lockout Electrical Panel Buttons and Switches with no inbuilt lockout provision. Attach the base plate directly onto the electrical panel. Isolate the unit by placing the house unit over the top preventing access to the switch.
These gate valves are comprised of 2 flattened half moons with a hollow centre. Hinged at one side, they are placed over the valve and then closed, ensuring that the valve wheel is tamperproof. Use a hasp if more than one padlock is required to lockout the device.
Our largest sized gate valve lockout is suitable for valve handles of a diameter from 330mm up to 450mm. It also has an integral clip out centre and a built in facility to use 4 padlocks on the unit without the use of a hasp. When not in use one side of the lockout can fit within the other to allow for ease of transportation and storage.
When slid into position the wedge on the slider section prevents the compression handle being squeezed, preventing operation of the valve. Working in a similar way to the standard Ball Valve lockouts, the wedge on the slider section sits between the compression handle and lever, preventing operation.
On flange ball valves the lever handle can be removed after operation. Once the valve is in the desired position and the handle removed, this lockout device fits over the top of the stem ring. The two sections of the device slide together over the top of the stem, ensuring it is suitable for various sizes of valves. Hole size: 46 x 38mm
Manufactured from tough moulded polycarbonate this lockout station provides 5 hooks and integral pocket for the presentation of lockout equipment and tags. Complete with hinged translucent cover which protect contents when not in use. Board dimensions (HxWxD): 406 x 315 x 65mm.
Kit contents: 1 x LOK189 Lockout Shell Case / Pouch 1 x LOK007-L Red Safety Lockout Padlocks (KD) 1 x LOK161 Aluminium MCB Lockout Toggle 1 x LOK241 Single Tag with Eyelet – (Double Sided) 1 x TGPEN01 Ultra-fine Permanent Pen
Kit contents: 1 x LOK061 Lockout Bag – Small (300mm) 2 x LOK0007-L Red safety lockout padlocks (KD) 1 x LOK014 Multi-purpose Cable Lockout with 2.5m nylon cable 1 x LOK045 Vinyl Coated Lockout Hasp – 38mm 1 x LOK050 Pack (10) of ‘Do not operate’ tags 1 x TGPEN01 Ultra-fine permanent pen 1 x LOK006 Adjustable gate valve 1 x LOK023 Small ball valve lockout 1 x LOK043 Universal MCB lockout 1 x LOK063 Pneumatic lockout
Kit contents: 1 x LOK062 400mm lockout bag 1 x LOK023 Small ball valve lockout 1 x LOK025 Large ball valve lockout 2 x LOK014 Multi-purpose cable lockout 2 x LOK044 25mm Vinyl coated hasp 2 x LOK045 38mm Vinyl coated hasp 6 x LOK007-L Red safety lockout padlocks (KD) 3 x LOK050 Pack (10) of ‘Do not operate’ tags 2 x TGPEN01 Ultra-fine permanent pen 1 x LOK001 25-63.5mm Gate valve lockout 1 x LOK002 63.5-127mm Gate valve lockout 1 x LOK003 127-165mm Gate valve lockout 1 x 4707 Caution Lockout in operation A-Board 1 x LOK030 Large plug / Pneumatic lockout 1 x LOK205 MCB Lockout Pin Out Standard 1 x LOK206 MCB Lockout Pin In Standard 1 x LOK208 MCB Lockout Pin Out Wide 2 x LOK043 Universal MCB lockout 1 x LOK063 Pneumatic lockout 1 x LOK055 3-phase dial lockout
This dual scissor action hasp has a steel body with a powder coating to prevent rusting. The aluminium pivot provides a smooth and lasting movement. The two different jaw sizes ensure the ultimate in adaptability when lockout conditions vary.
Manufactured from solid stainless steel this pneumatic lockout is strong, durable and resistant to corrosion and fits virtually all pneumatic fittings used in manufacturing facilities. Simple to use, place the pneumatic male fitting between the appropriate sized hole and close with a scissor action. This then prevents the hose from being used.
Used to prevent access to the main cylinder valve, the unit encloses the valve head and is locked in place with 2 interlocking plates. Each lockout is supplied with 2 extra labels, your choice of which can be fixed onto the lockout to depict if the cylinder currently being locked out is full or empty. Interior size of 84mm dia. x 150mm, accepts neck rings up to 34mm dia.
Manufactured from sturdy polystyrene, the unit has been developed to enclose electrical plugs to prevent a machine being energized. The plug sits inside the unit with the cable being fed through an access hole in the side. The small unit is suitable for a variety of electrical connections up to 40mm diameter, with a locking mechanism taking up to 4 safety padlocks. The large unit is suitable for standard and larger electrical plugs, including 3 phase connectors. It also has 4 holes of 3 different sizes suitable for pneumatic male air hose connectors. The unit has a locking mechanism suitable for up to 4 safety padlocks.
Red powder coated steel lock box for storage of keys or other machine activation devices. Once a machine has been isolated and made safe, the keys are placed in the lock box; each authorised person working on the machine then applies their own padlock to the lock box, ensuring the keys cannot be accessed until every authorised user is satisfied the machine is safe. 13 (total) padlock fixing holes • Carry handle on top