Post Buy Requirement
Mas Paints & Chemicals Ind
Sharjah, United Arab Emirates
Add Review

Decorative Paints #1074481

Decorative Chalkboard Paint

Decorative Chalkboard Paint that we are offering is formulated using excellent quality chemical compounds that we procure from reputed vendors. We prepare them in various colors and grades with the help of modern machineries and technologies at our state-of-the-art manufacturing unit. We are an eminent Decorative Chalkboard Paint Manufacturer and Supplier from Sharjah, UAE. Buy them from us at unbeatable prices.

View Complete Details

Pearl Finish Wood Paint

Pearl Finish Wood Paint is a special polyurethane varnish based on poly-functional saturated polyester and selected pearlescent pigments. It is used to give metallic effect to all kinds of wood. Our Pearl Finish Wood Paint is processed using the latest processing techniques in order to eliminate each and every possibility of defect. Also, it is delivered on time so as to maintain trust of the customers. By providing prompt and timely delivery of products, we have become the sought after Manufacturer and Supplier of Pearl Finish Wood Paint from United Arab Emirates.

 

Major Uses : For Furnitures in general, cabinets, picture frames, turned pieces and chairs.

 

Method of Application and Usages :

  • The suface to be topcoated should be primed with polyurethane or polyester primer.

  • It must be well sanded and free from dust, oil, water and contaminants.

  • Apply 1 – 2 coats of intermediate coat (any choice of colour)

  • Apply 1 – 2 coats of Pearl Finish flash horizontally and vertically. To attain a different exciting colour, tint finish flash with the desired concentration with tinter dyes.

  • Finished product can be over – coated with acrylic finish clear gloss or polyurethane Gloss Tac / 033.

 

Storage : Store in cool areas below 25 oC. Shelf life is 12 months in closed container. Keep container tightly close.

 

Cleaning of Tools : All Tools should be cleaned with wash thinner or PU Thinner # 105 as soon as possible.

 

Packing : Available in 1 Usg, and 20 lit Pail.

 

Physiological Hazards :

Peal Finish Flash does not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment. Pearl Finish Flash is flammable and harmful if swallowed, if contact with eyes occurs, cleanse with fresh water and seek immediate medical advise.

 

The above information is given to the best of our knowledge based on laboratory test and practical experience. However, as the paint is often used under condition beyond our control, we cannot guarantee anything but the quality of the paint itself. We reserve the right to change the given data without prior notice.

Characteristics And Physical Properties

Appearance Semi – transparent liquid
Sp. Gravity 0.980 Kgs.
Flash Point 21oC
Coverage/ Coat 8 – 10 m2/ lit
Pot Life 12 months.

 

Mixing Ratio

PEARL FINISH FLASH 100% By Volume
Catalyst # 008 50% By Volume
PU Thinner 20 – 25% By of Volume of Total A+ B mix.

Note : In hot Condition, it is advisable to add 4 – 5 % of Retarder Thinner.

Drying Time

Dust free 15 – 17 min
Set To Touch 90 min
Hard To Dry 2 - 4 hrs
Overcoat 3 – 4 hrs.
View Complete Details

Anti Scratch Wood Paint

Anti Scratch Wood Paint is based on polyfunctional saturated polyester and selected pigments that gives an anti-abrasive spots on the surface. It is formulated using the best-in-class ingredients and is tested on predefined parameters of quality. By supplying such quality of products, we have become one of the prominent Manufacturers and Suppliers of Anti Scratch Wood Paint from United Arab Emirates. It is supplied to the customers’ end only after the completion of all testing procedures.

 

Major Uses : Best for furnitures, office tables, shelves, turned pieces and cabinets.

Method of Application :

  • The surface to be coated should be primed with polyurethane or polyester primer.
  • It must be well sanded and well – prepared before the application of base colour (any choice of colour).
  • Mix anti – Scratch finish gloss or matt with their respective catalyst and stir thoroughly, thinner is not required.
  • Apply with normal spray gun at the desired consistency ; take note that the air pressure is about 0.3 atm.
  • To attain a very exciting design. Apply another coat of contrasting colour inot the same surface.


Storage : Store in cool areas below 25 oC. Shelf life is 12 months in closed container. Keep container tightly close.

Cleaning of Tools : All tools should be cleaned with wash thinner or PU thinner # 105 as soon as possible.

Packing : Available in 1Usg, and 20 lit pail.

Physiological Hazards :
Anti Scratch Finish Does not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment. Anti Scratch finish is flammable and harmful if swallowed, if contact with eyes occurs, cleanse with fresh water and seek immediate medical advise.

The above information is given to the best of our knowledge based on laboratory test and practical experience. However, as the paint is often used under condition beyond our control, we cannot guarantee anything but the quality of the paint itself. We reserve the right to change the given data without prior notice.

Characteristics And Physical Properties

Appearance Coloured liquid
Flash Point 21oC
Solid Content Gloss 51% Matt 46%
Coverage / Coat epends on the consistency
Pot Life 6 – 8 hrs.

 

Mixing Ratio

Anti scratch gloss 100% By Volume
Catalyst # 016 50% By Volume
Anti – scratch matt 100% By Volume
Catalyst # 013 50% By Volume

 

View Complete Details

Semi Gloss Clear Wood Paint

Semi Gloss Clear Wood Paint is a semi – gloss lacquer with nitro solution, modified alkyd resin and selected plasticizers. It is Suitable for woods that are undercoated with nitro, polyurethane, polyester and acid catalyzed lacquer primers. It makes the surfaces resistant to water and alcohol Semi Gloss Clear Wood Paint gives a brilliant finish and great transparency to wooden surfaces. We are named among the renowned Manufacturers and Suppliers of Semi Gloss Clear Wood Paint from United Arab Emirates.

 

Major Uses : For furniture in general, chairs, turned pieces, clothes – hooks, picture moldings. Cabinets, doors etc.

Method of Application :

  • By Spraying (3-4 atm) / Brushing
  • For well prepared surface : 1  - 2 coats thinned to 60 – 100% N.C. Thinner
  • Let it dry for 60 – 40 minutes, sand with fine sand paper.
  • Repeat the top coating process thinned with 60 – 100% N.C. Thinner to obtain the desired glossiness.


Storage : Keep material in a cool place below 25 oC. Keep the container tightly closed. Shelf life of 12 months Minimum.

Cleaning of Tools : All tools should be cleaned with wash thinner or NC lacquer thinner as soon as possible.

Packing : Available in 4 lit (usg.), 20 lit (pail) and 200 ltr (Drum)

Physiological Hazards :
NC Semi Gloss Clear does not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment. Nc Semi gloss Clear is flammable and harmful if swallowed.l if contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advise.

The above information is given to the best of our knowledge based on laboratory test and practical experience. However, as the paint is often used Under condition beyond our control, we cannot guarantee anything but the quality of the paint itself. We reserve the right to change the given data without prior notice.

Characteristics And Physical Properties

Appearance Opalescent
Gloss @ 60oC 45 – 50%
Sp. Weight 0.980 kg.
Flash Point 21oC

Coverage/ Coat

Coverage @40 microns

Coverage @50 microns

120 – 180 gms / m2

9 – 10 m2 /lit

7 - 8 m2 /lit

 

Drying Time

Dust free 10 –15 min.
Set To Touch 30 min
Hard To Dry 3 hrs
Pilling Up 24 hrs

 

View Complete Details

Isolator 100 Wood Paint

Isolator 100 Wood Paint is a mono component isolating varnish based on vinyl chloride resins. It is used to block tannin and moisture content of wood. We are named among the renowned Manufacturers and Suppliers of Isolator 100 Wood Paint from United Arab Emirates. We have a well-equipped production house that enables us to produce a wide variety of Isolator 100 Wood Paint. We have a vast distributed system that supports us to reach buyers within the stipulated time frame.

 

Major Uses : Recommended as impregnating coat for veneer woods, white colored woods, beech and ash woods on polyester system.

Method of Application :

  • Isolator # 100 is normally applied by spraying 1 – 2 coat to insulate a stained wood or when humidity may interfere with catalysis of polyester.
  • Isolator # 100 can be applied more than 2 – 3 coats by brush with an interval of one hour per coat to insulate palisander or walnut veneer, and apply polyester varnish after 4 – 5 hrs.l and not longer than 48 hrs.


Storage : Isolator #100 should be kept in cool place below 25 oC. Shelf life min. 12 months in a tightly closed container.

Cleaning of Tools : All Tools should be cleaned with wash thinner or PU Thinner # 105 as soon as possible.

Packing : Available in 4 lit. (usg.) and 20 lit. (Pail).

Physiological Hazards :
Isolator # 100 does not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment. The mixture, in its liquid state is flammable and harmful if swallowed. If contact with eyes occurs, cleanse with fresh water and seek immediate medical advise.

The above information is given to the best of our knowledge based on laboratory test and practical experience. However, as the paint is often used under condition beyond our control, we cannot guarantee anything but the quality of the paint itself. We reserve the right to change the given data without prior notice.

Characteristics And Physical Properties

Color Clear Liquid
Specific Gravity 0.90 kgs
Viscosity 15 sec.
Flash Point 18oC
Non – Volatile 15%
Dilution N / A

 

View Complete Details

2K Acrylic Wood Paint

2K Acrylic Wood Paint is based on non-yellowing acrylic polyol resins and saturated isocyanates. It is a weather resistant, high gloss solvent based acrylic clear. We are counted among the top companies, which are engaged in manufacturing and supplying 2K Acrylic Wood Paint from United Arab Emirates. Due to our vast distributed network, it has been an easy job for us to deliver retail as well as bulk orders for 2K Acrylic Wood Paint within the stipulated time frame.

 

Major Uses : Recommended for outdoor furniture, steel, external doors and frames, and automotive refinishes.

Application Procedure : The mixture ready for use, can be applied by brush, by roller or spray. Surface to be painted must be free of dirt and other contaminants. In the remaking of old woods. It is imperative to remove traces of wax, dirt and other oily matter to ensure a perfect adhesion of paints.

For repainting of steel surfaces, all damaged primers and contamination should be removed and thoroughly cleaned, prior to final painting.

Precautions :

  • Paint should be used within the pot life after components have been mixed together.
  • Never leave drums of catalyst # 042 open


Storage : Keep away from heat and fire. Store in the dark, cool and dry places. Shelf life up to 12 months in close container.

Packaging : Available in 1 Usg. 20 lit pail, 200 lit Drums

Physiological Hazards :
Acrylic 2k do not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment Acrylic 2k is flammable and harmful if swallowed. If contact with eyes occurs, cleanse with fresh water and seek immediate medical advise.

The above information is given to the best of our knowledge based on laboratory test and practical experience. However, as the paint is often used under condition beyond our control, we cannot guarantee anything but the quality of the paint itself. We reserve the right to change the given data without prior notice.

Characteristics And Physical Properties

Appearance Clear Transparent Liquid
Specific Gravity (20oC) 0.970 + / - 0 .1
Acid value 3.2 – 7.0
Pencil Hardeness 2H – 3H
Heat Resistance 100 – 120oC
Viscosity (250C,FC # 4)   45 Sec
Flash Point 23oC
Non – Volatile (Wt.%)

Base : 50 +/ - 0.5

Hardener : 41 + / - 0.5

Gloss (60oC)   Glossy ( 90 – 100)
Application Condition Brush, Spray or Roller
Thinner Acrylic Thinner
Catalyst Catalyst # 042
Mixing / Dilution Ratio (Wt. %) Base:Hardener:Thinner =100:50 25 ~ 30 (FC # 4 13 ~ 15 Sec)
Pot Life (20oC) 5 ~ 6 hours
Drying Time (20oC)

Dust Free - 20 – 25 min

to Touch - 30 – 45 min

to Recoat - 2 – 3 hrs

Hard - 24 – 36 hrs.

Coating Rate 12~ 14 m2/ lit. (80 – 120 gms / m2 )
Recoating One coat may be sufficient for ordinary finish however one additional coat can be applied wet on wet if necessary. Light sanding with 400 ~ 600 mesh sand paper is recommended before subsequent coat when recoating time exceeds 3 hrs. and remove traces of wax
Recommended Under Coat Acrylic Primer Sealer

Typical Recommended System

Wood
Acrylic Primer Sealer - 1 Coat
ACRYLIC 2K - 2 Coat
Automotive
Acrylic Primer - 1 Coat
Acrylic B/C White / Colour - 1 Coat
ACRYLIC 2K - 1 Coat

Note: ACRYLIC 2K can be applied over NC base coats also

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Abdullah Al Atrash (Mas Paints & Chemicals Ind)
  • Saja Industrial Area, Sharjah - 23085, United Arab Emirates
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/uae/company/maspaints/decorative-paints.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0006457832{main}( ).../index.php:0
20.01622044864include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.02732766800include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.03293707152header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice