Dubai, United Arab Emirates
Our Complete range of products are Stat X Aerosol Fire Suppression System, Deluge Foam and Water Spray System, Kitchen/Galley Wet chemical Fire Suppression System, Fire Extinguishers and Fire Hoses.
The Stat-X Aerosol fixed fire suppression system is an innovative, cost-effective and ecologically safe solution for rapid fire extinguishing and protection of high value enclosures. Stat-X Units are simply fixed directly on the wall or ceiling in the risk area being protected, which allows easier and more cost-effective installations that require no pipe work or nozzles. The Stat-X units have zero ozone depletion and zero global warming potential and are available as electrically, thermally or manually activated units. Read More
A deluge system is similar to a pre-action system except the sprinkler heads are open and the pipe is not pressurized with air. Deluge systems are connected to a water supply through a deluge valve that is opened by the operation of a smoke or heat detection system. The detection system is installed in the same area as the sprinklers. When the detection system is activated water discharges through all of the sprinkler heads in the system. Deluge systems are used in places that are considered high hazard areas such as power plants, aircraft hangars and chemical storage or processing facilities. Deluge systems are needed where high velocity suppression is necessary to prevent fire spread.
The Nobel K-Series wet chemical Suppression System is one of Europe’s premier kitchen and galley fire suppression systems. The wet chemical suppression system employs defence technology ‘Gas Generators’, similar to the technology used in life safety applications such as car airbags, which enhance safety, reliability and enable complete monitoring of the system. Each fire system is designed specifically around the risk at hand giving complete flexibility and control. The K-Series system is C.E. Marked and is approved and certified to LPS1223 and ISO 15371:2009. Marine type approval includes Lloyds; MCA; ABS; DNV/GL; RINA and Korean Register.
We supply a variety of Portable and Non Portable Fire Extinguishers like Carbon Dioxide, Dry Chemical Powder, Foam and Water ranging from sizes 2 kgs to 50 kgs . We represent brands like SRI and EVERSAFE Malaysia which are approved as per the marine standard.
Fire Hoses which are suitable for Industrial and Marine applications are available rubber lined with a high tenacity polyester yarn outer covering. The inner rubber outer synthetic hoses are single layered and double layered having various marine approvals and can be coupled and uncoupled with various couplings like NST, Storz, Nakagima, John Morris.
Jet and Spray Nozzle, 3 Position Fog Nozzle, Piston Grip Nozzle for Marine applications coupled with various couplings like John Morris, Nakajima, Storz are within our scope of supply. We supply brands like Protek, Akron, AWG. Foam Monitors used for Helideck area applications are supplied and installed by us of various brands like Skum, Protek and Elkhart.
Throw over type inflatable Liferafts and Davit Launchable Liferafts ranging from 6 person to 25 Person capacity which are approved as per the Marine standards are available within our scope of supply. We supply Sea Air and CSM brands from China.
Solas Approved Lifejackets which fully comply with the requirements of the latest regulations (IMO Regulations) with ergonomic design which allow them to adjust easily to every size, suitable for all weather conditions are supplied by us. We supply brands like Eval, Nautilus, Besto
Self-Contained Breathing Air Support System will been designed as per client’s requirements or QP, ZADCO, ADMA, ARAMCO Standards. The air requirement has been calculated as per Norms and the duration of breathing air storage is referred from the client’s specification. The system will be having both Electric Driven Breathing Air Compressors & Diesel Compressor of required flow rate, High Pressure Cylinders at 200/300 bar pressure, Regulator Panel, BA Manifolds with quick couplers, low pressure breathing air, 30 minutes SCBA & 15 minutes Emergency Escape Breathing Apparatus.
The dynamics of combustion of hydrocarbon fuel has forever been a subject of intense research the world over; as also the problems associated with it such as decrease in equipment efficiency through incomplete combustion, consequent carbon deposits and high emission levels.Flux Hi-Tech, Inc. has conducted exhaustive research into the utilization of permanent magnetic fields in alleviating these problems currently associated with hydrocarbon fuel combustion. These studies led to the invention of the FLUX maxiox™, with its rare earth metallurgy and the unique patented flux-collimator-pervader. The on-field success of this device and continuous research has now given way to the new FLUX maxiox™ (β-series) which, with its patented fusion technology and a better availability of magnetic field, promises to give rapid and effective results.
Opel energy systems Pvt. Ltd is an ISO 9001:2008 certified company with over 12 years of experience in energy field and over 250 Energy conservation projects in various industries saving huge amount of energy/fuel. With our outstanding service in providing energy conservation solution has led us to have clientele including Titan, Cummins, Honda, Volkswagen, JBF industries, Fujairah Gold UAE, Emerson Climate Technologies, RAk Ceramics UAE, etc.
ES-25 Energy saver is a highly advanced and sophisticated transformer based power voltage optimizer that attaches to your incoming electricity supply. It is a tried and tested technology known as voltage or power optimization to control voltage and suppressing the load harmonics on lighting and mixed load. This lowers the amount of kWh consumed, hence reducing the electricity bills and carbon emissions.
The dynamics of combustion of hydrocarbon fuel has forever been a subject of intense research the world over; as also the problems associated with it such as decrease in equipment efficiency through incomplete combustion, consequent carbon deposits and high emission levels.Flux Hi-Tech, Inc. has conducted exhaustive research into the utilization of permanent magnetic fields in alleviating these problems currently associated with hydrocarbon fuel combustion. These studies led to the invention of the FLUX maxiox™, with its rare earth metallurgy and the unique patented flux-collimator-pervader. The on-field success of this device and continuous research has now given way to the new FLUX maxiox™ (β-series) which, with its patented fusion technology and a better availability of magnetic field, promises to give rapid and effective result
The HEFM PolyEx high expansion foam generator is powered by a foam nozzles and are designed to expand the foam solution into a millions of a tiny stable bubbles. Expansion ratios up to 1000 litres of foam for every one litre of solution can be achieved depending on the generator selected, the solution flow rate and the water pressure. The generator require no other source of power such as electricity or gasoline engines. It is powered by the foam solution driving a hydraulic (water) motor. LEFG & FFB foam makers are designed to be an air-aspirating discharge device used primarily for the protection of the seal area of open top floating roof tanks and dike areas around tanks. The foam maker incorporates an orifice plate (sized for the required flow at a given pressure) and an air inlet. The foam maker is normally installed in the line of a semi-fixed or fixed foam fire protection system.
Carbon dioxide (CO2) Gas, the fastest and most efficient extinguishing agent against fires in protected spaces, suffocates the fire within designated time and minimize the damage in protected spaces. The Fire Extinguishing system extinguishes the fire by means of CO2 gas. The system consists essentially of CO2 cylinders, main isolation valves, manifold, CO2 nozzles in compartment protected space, and pipe lines connecting these main parts. The system is to be designed by the required discharging time, CO2 cylinders quantity and which are stored in independent CO2 room.High pressure CO2 systems are used for the fire protection of machinery spaces, pump rooms, cargo holds, paint stores and galley exhaust ventilation ducts. The systems are designed according to the SOLAS requirements and are type approved by the major classification societies
Each sprinkler is a true heat detector calibrated for a fixed temperature. A wide range of different quarzoid bulb and fusible solder devices (heat detector) are available for different applications and temperatures. As soon as the threshold temperature limit is passed, the quarzoid bulb bursts, or fusible alloy device melts and the sprinkler valve opens and releases the water under pressure. The water is projected directly over the seat of the fire which has generated the heat to operate the sprinkler. The rapidity of this action prevents from the fire spreading. The opening of even only one sprinkler starts an alarm which will alert the occupants as well as at the same time the fire brigades.The essentials role of water automatic extinguishing systems is to ensure that the fire is fought right from the start, by projection of water and simultaneously actuating the alarm. It is particularly suitable for solid combustible class A fire. Water is the most used extinguishing agent due to its availability as well as to its low cost.