midco equipment xxxxx

United Arab Emirates

The KPT-1100 reciprocating saw and file kit is a versatile tool used extensively in the auto body industry for cutting and filing sheet metal. With a stroke rate of 5000/ per min blade life is greatly improved the kit come with two cutting blades and three files

• Description
• Direct driven with full cast iron cylinder
• Large oil crankase for long life operation
• Plastic shroud protects hot and rotating parts
• Universal air outlet
• 2 Pressure auges
• Pressure regulator
• Ergonomic rubber handle
• Large wheels heightens portability
• Double feet with rubber shock absorber

Description

• The new TDRY range, thanks to the efficiently cooling module drop
• Ensures high energy saving and low operational cost
• The main advantages are low-pressure drop even with load variances and a constant pressure dew point with differing load conditions
• Other models on request: from 600 up to 35.000 Lts/min

Rollover car wash CARISMA model is excellent machine which facilitates easy maintenance and safe operation. The trolley mounted vertical brushes are independently controlled from each other.Carisma professional car wash systems are produced with different washing heights to wash different types of vehicles easily.The Large structure of the body allows control panel to be opened from the back of the machine. Therefore the machine could work in very narrow areas in width.
Carisma type of rollover car wash is composed of three brushes (1 horizontal + 2 vertical). The vertical brushes with trolley-mounted motor-chain system can move independently and also can move together in front and rear side of the vehicle with double action overlapping giving accurate cleaning. Vehicle profile following drying unit are installed on WD types. Professional car wash systems are made in different versions giving efficient washing for vehicle heights in between 2, 50 m. to 3, 40 m. and widths in between 2, 20 to 2, 40 m. It can perform washing with shampoo + foam (both W and WD model) and on WD models wax application plus drying. Also fixed side drying unit system (WSD Model) exists. Polyester Decorative cladding, water splashguards, foam arch is standard. Gantry driver motors work with inverter control. Horizontal and vertical brush pressures are power-controlled. All the machines are products of high technology utilizing PLC computer programming. Optional rollover car wash equipment can be added, all list is stated in Optional accessories tab.
Car wash machine cost depends from the accessories, dimensions, foam application systems and more. We would surely be glad to hear your requirements. In 25 years of production we always had different projects. Click Ask for price tab above images to require from us precise information. And please dont forget to write us your requirements.

OKYANUS X1types of Automatic Car Wash Machine is one of the best car wash systems which facilitates easy maintenance and safe operation. These swing (pneumatic vertical brush trolley movement swing on W350 types) system of OKYANUS machines are produced with different washing heights.
On our Rollover Type 3 Brush Okyanus X1 Model W states without dryer and WD states with dryer. There are 7 models that can wash Cars, Mini Busses and Midi Busses up to 240, 300 and 350 cm heights and Dry (WD) 240 and 290 cm heights. All the models except the 350 can wash the vehicles up to 220 cm width and W350 can wash up to a maximum width of 250cm.Automated car wash briefly about technology
It contains Decorative polyester top panel cladding and water shields, which are standard. The vertical brushes moves on the swing system. On the W350 models the vertical brushes move on the pneumatically driven brush trolleys plus the swing system. Inverter driven gantry motors for speed control and automatically controlled top brushes to set pressure on the car are the other technological standards of our best sold model.
On the dryer type models (WD) the alternatives are vehicle profile following top dryer with 2 fan type blowers or fixed drying system with 3 fan type blowers.W type models washes the vehicle 2-2, 5 min. with shampoo, WD type drying models washes, shampoos, waxes and dries the vehicle in 5-6 min.
OKYANUS yields best washing results for small cars as well as for vans and SUVs. The electronic safety systems on the top brush gives to apply a soft, controlled and a safe wash on the vehicles. The ease and low cost maintenance requirement, and best car wash technology of this machine is the reason for the high demand. It is possible to assemble all the optional accessories easily to the machine.
Automatic car wash machine price you can know on request, because projects vary due to sizes, presence of dryer, shampoo applying, coin-operation technology and much more which you can check in Optional Accessories tab. We would surely be glad to hear your requirements. As during 25 years of experience we never had two 100% identical project. To calculate automatic car wash machine price, please, use Ask for price tab above images. There you can provide us required characteristics for desired automated car wash. After we receive your inquiry, we will provide you up-to-date information and price.

What is inside this automated car wash machine:

The wheel balancer for garages with small tyre service volume - combines high accuracy with small footprint

• Designed for all kinds of drilling, grooving, notching, taping etc. on aluminum profiles
• Uninterrupted machining property by means of the tandem mode to reduce the workpiece change time
• B&R automation system enabling CNC movement on 3 axis
• 8 tool magazine unit, 6 for cutter bits, 1 for aggregates and 1 for saw blade
• Solid steel construction of the body and dynamic performance gantry
• Special sound insulation cabinet around the machining center
• PLC controlled spray tool cooling system with 3 pcs of outlets
• 4 x automatic clamps used for grabbing the work piece
• 2 x pneumatic rests used for resetting the work piece in X direction
• 15 color touch screen
• Fast programming using 7 preset macros
• Program import via USB flash memory stick
• Technical support via remote connection capability
• Standard ISO G code programming language
• Central lubrication system
• Multi-language support
• Operator safety barrier
• LED lighting in the cabinet
• OPTIONAL
• Machine with 7 m of length
• Automatic clamp positioning via Advance Alpha CAM software
• Rapid programming with Standard Alpha CAM software
• Tapping chuck (up to M10)
• Automatic tool length measurement device
• Barcode-Scanner
• Chip removal conveyor belt
• Additional clamps
• Aggregate tools
• Cutter tools, milling saw, tool holder and collets
• Additional magazine unit with 6 tool capacity

By means of additional aggregate tool, various profiles can be machined with 4-axis movement. The machine can be used in tandem mode, a work method that allows machine stop times to be reduced to a minimum as it allows workpiece change time (loading/unloading) to be runwhile the machine is operating.

The machine has automatic clamp positioning feature and equipped with magazine unit holding 8 tool-units with the possibility of placing 2 aggregate tools and 1 milling saw to perform machining on the 5 sides of the pieces.

• Providing 2 and 4 axis CNC controlled corner cleaning movement and the 4 corners of PVC profiles welding line .
• Yilmaz cleaning machine custom profiles programming
• Capable to operate manually and automatically,
• Automate the recognition profile,
• Automatic cleaning blade profile with 11 teams,
• separate cleaning blades for colored and white profiles,
• Profile wing width and height chassis control sensor,
• Automatic bearing lubrication system, Windows-based touch-screen computer,
• To be able to transfer programs via USB memory,
• Technical support network with remote connection
• movable control panel,
• The speed can be changed during the process,
• 220 frames / 8 hours (608 CNC)
• 270 frames / 8 hours
• The display of alarms and alerts can be seen,
• Phase control system,
• Low pressure control system,
• Automatic profile flip robot can transfer the end of the 4 corners of the cleaning line feature
• Automation system that allows movement in three axes (X, Y1, Y2),

• Two-hand safety operation
• Manual adjustment of intermediate tilting angles from 22.5 inwards and to 22.5 out wards
• Pneumatically setting the saw blade to the 90angle by means of a selection
• button without adjustment
• Tilting pneumatically to the adjusted angle by pushing the button
• Hydro-pneumatic saw feed
• Adjustable saw blade feeding speed
• Automatically closing safety guard
• Ideal for large size of profiles and massive bars

STANDARD ACCESSORIES

• Equipped with saw blade 550 mm
• MKN 300 roller conveyor (3m)
• 1 x vertical clamp
• 2 x horizontal clamps
• Spray saw blade lubrication system
• Air gun

OPTIONAL ACCESSORIES

• Additional saw blade 550 mm

• Opens corner joint holes on the aluminumprofiles
• Opens corners up to 1.5 mm of thickness
• Practical operations
• Ergonomic design of the body
• Special punch tool set hardened

• Manual or automatic operation features
• Windows based PLC controlled 15 touchscreen monitor
• Preparing cutting lists manually or via PC
• Remote connection and problem solvingfeature
• Easy program transfer with USB memorystick
• Maximum +/- 0.1 mm of cutting accuracy
• Making changes on the cutting lists by thescreen
• Conveyor length: 3000 mm
• Useful width: 200 mm
• Carrying capacity: 9 kg/m
• Minimum cutting length: 5 mm
• SKN 450 is available with the length of4.500 mm
• SKN 600 is available with the length of6.000 mm

• Copy fitting operates manually and the figures on the template are machined at 1:1 ratio
• The aluminium profiles up to 3 mm walls can be conveiently machined with a strong spindle motor.
• The cutting fluid controlled with a joystick is sprayed to the milling spot.
• Canals in varied lengths and widths can be opened without using the copy milling template
• The water evacuation canal lenght on the copy template is adjustable
• Copy milling motor is directly controlled via joystick
• Referance stops the 2 axes of the milling machine
• Inlet-outlet conveyor provided as standard
• Ergonomic hand control unit
• Front profile clamps are standard and top profile clamps are optional.

• Copy fitting operates manually and thefigures on the template are machined at 1:1ratio
• The aluminum profiles up to 3 mm of wallthickness can be machined with a strongspindle motor
• The cutting fluid controlled with a joystick issprayed to the milling spot
• Slots in varied lengths and widths can beopened without using the copy millingtemplate
• The length of the water drain slot isadjustable on the template
• Copy milling motor is directly controlled viajoystick
• Reference stops at 2 sides of the millingmachine
• Standard equipped with inlet-outletconveyor
• Ergonomic hand control unit
• On the horizontal axis there is triple holedrilling mechanism
• Pneumatically working water slot openingsystem

STANDARD ACCESSORIES

• 5mmx L :80mm of router bit
• Air gun
• 2 x profile stops both left and right
• Spray tool lubrication system
• 2x horizontal clamps
• 2x vertical clamps

OPTIONAL ACCESSORIES

• Additional router bits
• Special copy templates

• Copy router with 1 vertical and 2 horizontal spindle motors ( 3 x 1.1 Kw 12.000RPM)
• Designed to perform quickly and precisely locks holes on 3 sides of the aluminum profile without releasing the workpiece
• Pneumatic 2 x horizontal and 2x vertical clamps
• Horizontal and vertical pneumatic tracers with 3 diameters 5, 8, 10 mm
• Horizontal & vertical templates with standard figures for Aluminum and PVC profiles.
• Smooth movement, high precision and great sensitivity provided with gas spring and ergonomic handles
• 1 m of roller support table at the right (with ruller) and left side
• Manualy adjustable profile stops 5 placed on the right and left that allows
• he work piece to be positioned properly in the machine.
• Spray tool lubrication system

OPTIONAL

• Additional router bits with 5mm, 8mm and 10mm
• Additional collets with, 8 and 10
• Special templates

• Opening locks, drilling handles, hinges, espagnolette holes etc. on PVC andaluminum profiles
• Hydro-pneumatic Triple Hole DrillingMechanism
• Cast aluminum structure
• Corrosion proof bearing shaft
• Robust machine stand constructed fromsteel sheet
• Equipped with tools for triple drillingmechanism (2x 10, 1x 13mm)
• Equipped with 8 cutter tool

STANDARD ACCESSORIES

• 8 router bit
• 2x left and right profile stops
• 2x horizontal clamps
• Air gun

OPTIONAL ACCESSORIES

• Spray tool lubrication system
• Additional router bit
• Special copy template
• MA 240 centering apparatus
• MKN 150 roller conveyor

• High quality end milling operations bymeans of the manual operation
• Safety operations with safety guard
• Practical cutter adjustment by means ofthe gap parts
• Fixing the workpiece by means of thepneumatic vertical and horizontal clamps
• Robust machine stand
• End milling profile dim.( HxW): 90 x 260 mm
• Max. saw blade diameter: 170 mm

STANDARD ACCESSORIES

• 1 x pneumatic vertical clamp
• 1 x pneumatic horizontal clamp
• Air gun

OPTIONAL ACCESSORIES

• Milling cutter set
• Spray tool lubrication system
• MKN 100 roller conveyor

• 1 x saw unit lower (vertical) with 550 mm dia. and 1 x saw unit upper(horizontal) with 500 dia.
• Semiautomatic sawing unit with adjustable feeding speed and linearguides
• Indication cutting angles of the saw blades and pivoting angles of theback fence (opt)
• 3 x vertical and horizontal pneumatic clamps
• Cast iron and steel construction of the body that is strong and lasting
• Pneumatic guard with CE compatible locking switch
• Two-hand safety module
• Motor brake system for both saw blades
• Both saw blades can be swiveled via a worm drive with a crank handleto mitre
• Manual adjustment of profile resting mechanism with analog displayon the hand wheel
• Compensation for sawblade wear is easy to adjust
• Interior LED lighting
• Chip collection pan
• Spray saw blade lubrication system

OPTIONAL

• Laser indication for vertical and horizontal cutting line
• Digital display unit showing the tilting and pivoting anglesof both saw blades and table
• Additional saw blades

• High quality stripping and cleaning operationsby means of the hydro-pneumatic system
• Profile processing capability up to 180 mm ofheight
• Practical change of cutter provides ease ofoperation
• Fixing the workpiece firmly by means of thevertical and horizontal clamps
• PLC operation system
• Centering system to fit the profiles properlyon the setsquare
• Robust machine stand
• Stripping blade levels are adjustableaccording to laminated and un laminatedprofiles
• Pneumatic tool fixing and releasing systemSingle or multi cleaning operations can beprocessed
• Automatic start up feature when profileplaced on the table
• Stops automatically after stripping andcleaning operation

STANDARD ACCESSORIES

• Air gun
• OPTIONAL ACCESSORIES
• Corner cleaning cutters

• Fully automatic two corner welding of PVCwindow profiles at an angle of 90
• Possibility of precise welding of profilesbetween 30-180 on the left head
• All parameters such as melting andwelding time, welding pressure are set onthe control panel independently
• Continuous precision of welding qualityby means of linear rails
• Welding two corners of window frames orsash profiles are carried out in one cycle
• User friendly with practical Teflon changefeature by means of the roller system
• Saving of time by means of most practicalmold change system in the market
• Capable of adjusting the clamp andweld ing pressure according to the profiletype
• Adjusting the heat between 0-300C viaelectronic thermostat
• Practical setting of standard (2 mm) orseamless (0.2 mm for free of flashes)welding options
• The movable right unit moves manuallyand left welding unit is fixed at 90
• After clamping the profiles, the welding iscarried out automatically
• The moveable right welding unit isequipped with a brake system
• For safety reasons, the clamp pistonsoperate with low pressure
• Equipped with two pcs. of support arms

• Enable the welding of all angles between30-180infinitely adjustable
• Practical adjustment of standard (2 mm) orseamless (0.2 mm) welding optionsmanually
• Welding possibility for very high (180 mm)profiles
• All parameters such as melting andwelding time, welding pressure are setindependently
• Automatically start and finish the weldingcycle
• Adjusting the heat between 0-300C bymeans of the electronic thermostat
• Easy and smooth welding operations forlong profiles by means of rotating supportarms
• Maintenance friendly, for example cleaning of the heater plate and changing ofthe Teflon is very easy bymeans of quick change system
• Standard equipped with height adjustableprofile support arms on both side
• Clamping the profiles separately via footpedal
• Saving of time by means of practical moldchange feature

OPTIONAL ACCESSORIES

• Special welding molds

• Used for carrying and storing the window profiles and glasses
• 4 piece of free moving wheel, 2 of which have brakes
• Rolling pulleys making the motion of material carried over ground easy
• Plastic covered surfaces to prevent scratches on work pieces
• 8 sections compatible with minimum and maximum profile size
• Width (W) x Length (L) x Height (H) : W 990 x L 1500 x H 1500 mm
• Distance between sections: 140 mm

• Opportunity to mount 4 piece of seal roller
• Adjustable sections according to different roller diameters
• Max. Roller quantity: 4 pc. x 550 mm
• Max roller length : 300 mm
• 4 piece of free moving wheels, 2 of which have brakes
• Height: 1500 mm

• Used for carrying and storing horizontal profiles
• 4 piece of free moving wheels, 2 of which have brakes
• Surfaces are covered with rubber to prevent scratches on work piece
• Width (W) x Length (L) x Height (H) : W 990 x L 1600 x H 1600 mm
• Length of holding bars: 430 mm. X 2

• This table is designed to be used for mounting of door, window and blade profilles andtheir Windows
• It can expand horizontally and vertically for big frames and blades
• The upper surface of the table can be tilted to a 70 in order to carry out the mounting ofthe glasses
• For pneumatic and electrical tools that will be used during the mountingprocess, the tablecomes equipped with a pneumatic quick connection and a electrical plug on the side
• Width (W) X Length (L) X Height (h): W 1800-3250 mm X L 1700-2200mm X H 865mm
• Maximum Frame Mounting Dimensions 3200 x 2800 mm

• Flexibility: the configurations and options available, the possibility of gluing up to 12x60 mm and the high feed speed make the Flexa 207 Super a machine without compromise. The MEGA 300 numerical control, supplied as standard, controls all machine functions and allows positioning of the working units with sequential
• The MEGA 300 numerical control, supplied as standard, controls all machine functions and allows positioning of the working units with sequential start up of the motors according to the working program selected.
• Reliability: the machine's solid structure, the sturdiness of the working units, thorough designing and mechanical precision and assembly, guarantee flawless panel edgebanding under any working condition.

Teflon coated glue pot

• n.6 heating elements: 4 in glue pot, 1 on the tower and 1 inside motorized glue spreader roller
• The motorised glue spreading roller, with electrical resistance inside, distributes a uniform layer of glue that can be adjusted in thickness on the side of the panel to be processed

Automatic panel feeder with toothed belt

• Feeding speed 7 m/min
• Toothed belt with steel strands inside for stiffness.
• Working table length 1800 mm with Polizene sliding fences
• N. 7 small rollers with adjustable angle position for panel side pushing. Each roller can be quickly taken out for easy cleaning
• Front extensible support up to 60 cm with polizene sliding fence.

Logic functioning controller by PLC

• Thermostatic glue control with automatic standby and temperature
• Complete automation control of the various operating units
• Diagnostics system with messages for machine use and maintenance
• Statistical operating data: total hours of machine use, total and partial metres of edge used

Heavy duty Machine housing

Bag diameter 500 mm

Suction Inlet 100 mm x 4holes

• The FMJZ-C sleeve filter is adust collector self-cleaning with compressed air
• Use: Fine and large dust filtering.
• Operation: The dusty air passes through the filtering fabric which separates the dust. Cleaning of the sleeves is automatically managed by an economiser with differential pressure switch that controls the head losses and maintains the air flowrate constant.Dust collection: The dust is continuously extracted by a feed auger.
• Composition: Made from self-supporting modular galvanised panels. Consists of a upper module with fan and air inlet hopper, a central module with filtering sleeves, a lower module with legs and dust extraction system

• Fine adjustment of the scoring unit
• Thickness with adjustable scoring blade 'Leader'
• The 2 x 45 mitre fence is equipped with a reversible stop and heavy duty wood clamp.
• Parallel fence with micro adjustment, alu profile can be lowered to the table for narrow cuts with tilted saw blade.
• Overhead saw guard
• Digital read out parallel fence

• This item is 33113 CABLE, MEXP/CA300 INTERCNECT
• This product is used for electrical-cables
• Connects the microExplorer display to the microDrain/ microReel inspection system
• Provides true accessibility, increased efficiency, and reduced job time
• Weighs 0.65 lbs. and is 36-Inch long
• Perfect for small diameter drain inspection
• Flexible and abrasion resistant plastic with electronic components

• 44185 Wheel, Cutter E1032
• This item is used for Handtools & Tool Organizers , Pliers & Cutters
• Model E-1032
• Fits catalog numbers 32895 and 42370
• Fits model numbers 202 and 360
• Cuts steel pipe and ductile iron

• Effortlessly punch round holes up to 63, 5 mm holes in 3 mm mild steel without burdensome ratcheting or pumping
• 360 head rotation enables maneuverability in tight spaces
• Combine with other heads in the RIDGID QuickChange System to maximize efficiency and productivity on the job site
• RIDGID Hole Punch Dies for quick and clean round hole punching without material jamming

• Combines ease of hydraulic operation and precision-ground knockouts to provide clean, quick holes. Available with foot or hand pumps.
• Precision-ground 3-point punch/die sets. Capacity to 4" in 12 gauge mild or 14 gauge stainless steel.Powerful 11-ton hydraulic ram.
• Pumps equipped with internal safety relief valve.
• Ram and pump equipped with quick disconnect couplers

• Classified to UL 1976 for Copper Connectors and Wire From #8AWG to 600 Kcmil and Aluminum Connectors and Wire From #8AWG to 350 Kcmil
• Quick release latching system for maximum efficiency
• Crimp dies quickly snap into head no push button or adapters to change dies
• Slim compact design and 360 head rotation enables access to tight spaces
• Compatible with 6 Ton dies from RIDGID and other manufacturers*
• LR-60B designed for 6-Ton U Dies ONLY

Features

Manual Ratchet Action Cutters

• Unique ratchet mechanism provides easiest cuts with less fatigue
• Light-weight and compact design for single-handed use (RC-40 and RC-55)
• Long ergonomic handles (RC-70) provide easier cuts on large size cables
• Pawl release allows blades to be released any point during cutting
• Lock/unlock mechanism secures tool when not in use
• Enclosed spring is protected from debris and loss during use
• Highest quality blades for durability and longest lifetime

Manual Leverage Cutters

• Longer handles give more leverage and reduced operator fatigue
• Sickle-shaped, rounded blades assure precise cutting
• Robust design with impact resistant coated and hardened handles
• Highest quality blades for durability and maximum performance and life
• Soft grips provide additional handle ergonomics

• Precision-ground 3-point punch/die sets. Capacity to 2" in 10 gauge mild or 12 gauge stainless steel.
• H-D ball bearing drive screws.
• Sets include durable ABS storage case.
• Three kits available, including deluxe ratchet drive.

• Trims 85 sizes of ACSR cable from 8 AWG to 1, 780, 000 circular mils (C.M.).
• Bushings for 9 popular cable sizes from 1/0 AWG through 1, 780, 000 C.M. available from stock.
• The operation of the tool is similar to that of a conventional tubing cutter.
• The bushing holder, cutter and handy carrying case are sold as one unit.
• Case contains storage sockets for 11 bushings. Twelfth bushing is stored in holder.

• Interchangeable heads and blades for cutting up to 50 mm diameter copper/aluminium standard building wire and copper fine stranded wire or up to 30 mm diameter ACSR cable.
• 360 head rotation enables maneuverability in tight spaces.
• Combine with other heads in the QuickChange system to maximize efficiency and productivity on the job site.

• All RIDGID segmented diamond drill bits are laser welded for superior strength. They are three times stronger than conventional brazed bits. RIDGID core bits are available in 2 styles: Premium Red and High Speed Premium Red. Premium Red core bits are heavy-duty, multi-purpose bits for drilling in many types of materials including reinforced concrete, cinder block, stone, etc. High Speed Premium Red core bits are designed for high speed drilling. Unique diamond segment design can increase drilling speed as much as 30% over conventional bits.

• Engineered for continuous dry or oiled hole cutting.
• Dual-side controls provide easy operation.
• GFCI and a built-in breaker for operator protection.
• Two carrying handles ease mounting and alignment.
• Built-in level for multiple hole alignment.

The RIDGID Model HC450 is engineered for continuous 14" (6 mm) to 4 34" (120 mm) hole cutting in and up to 8" (203 mm) diameter steel unpressurized pipe. The built-in level ensures line up for multiple holes when branching lines using Mechanical T, Vic-O-Let fittings or welded saddles. The HC450 is ideal for mechanical, industrial maintenance and fire protection contractors since it cuts holes into a wide variety of pipe materials. No off-the-shelf drill-based hole cutter compares in performance or durability to the rugged purposed-built Model 450.

• High quality blades for every application. Available in carbon, or bi metal consisting of a high-speed steel cutting edge welded to a flexible alloy steel back for wood or metal cutting. RIDGID blades will fit in all reciprocating saws and are packed in plastic sleeves with five blades or 50 blades.

• 6 mm camera head, nearly one-third the size of the standard camera head.
• Enables detailed inspections in very confined spaces.
• 4 LED lights provide clear images.
• Fully flexible cables for easy navigation.
• Sleek aluminum construction withstands demanding applications.
• Compatible with: RIDGID micro CA-100, micro CA-300, microEXPLORER and SeeSnake micro systems.*

• Purpose-built directional fault finder
• Locates insulation faults up to 2 megohms
• Reference readout to determine fault location
• Durable, lightweight powder-coated aluminum frame
• Weather proof membrane buttons
• Made in the U.S.A.

• Designed for bore slots 1.75 to 3 wide.
• Easily integrated into your current boring process.
• Keep digital video documentation of each inspection.
• Works in most soil types, including wet clay and dry sand.

• Wi-Fi

Stream or record inspections to an iOS or Android phone or tablet with the free HQx Live companion app Storage Options

• Storage Options

Internal solid state drive provides ample storage of images and videos captured from multiple jobs

Dual USB ports makes for easy delivery of multiple copies of an inspection

• Internal GPS

Geotag media with positional information when available

• Water-resistant Keyboard

Easily add on-screen titles and annotate reports

• Daylight Viewable Display

Provides a crisp, clear, in-pipe image

• Ideal for locating septic tanks.
• 512 Hz signal.
• Flashing LED indicates that sonde is transmitting.
• Flushable.
• Battery-powered.
• Meets FCC Class B and EN 55022 Class B requirements.

Documentation made easy with the RIDGID micro CA-300 Inspection Camera, the next evolution of the microEXPLORER. Easily record still images and videos of problems in hard-to-reach areas and save these on the internal memory (235 MB) or the included 4 GB SD-card. Comfortable pistol-grip design, large screen and rugged anodized aluminum camera head with four bright LEDs make it easy to detect and diagnose the unreachable. Get the perfect view with enhanced features like image rotation and digital zoom. Besides the replaceable 3.7V Li-Ion battery, the micro CA-300 can also be powered with the included AC Adapter which is ideal for time consuming (drain) inspection jobs or when you simply run out of battery.

• Ten watts of fully variable power output
• LCD display provides instant visual feedback on line resistance and current flow
• Two 25' (7, 62 m) lead wires with heavy duty clips
• Audio feedback confirms a good circuit before beginning a trace

• Rugged ergonomic design makes it comfortable to use, yet tough.
• Tri-Mode Detection for option to be alerted with a visual, audible or vibration alerts which can be adjusted for your environment.
• Adjustable sensitivity settings provide precise leak locating with the touch of a button.
• 16" (40 cm) flexible probe allows location and detection of leak in hard-to-reach and confined spaces.
• Field replaceable sensor means more up-time and less time waiting for repairs.