My ExportersIndia

For Buyer

For Seller

For Help

NC

Norden Communication Middle East FZE
location DUBAI, United Arab Emirates

Write a Review

Our Products

  1. Surveillance Equipment 11 Products available
  2. Audio Video Connector 7 Products available
  3. Electrical Cables & Wires 7 Products available
  4. Microphones 6 Products available
  5. Telecommunication Cable 6 Products available
  6. Outdoor Speaker 6 Products available
  7. CCTV Camera 6 Products available
  8. Fiber Optic Cables 5 Products available
  9. Packaging Seals And Caps 4 Products available
  10. Others Products 112 Products available

Our Products

Leading Manufacturer, Supplier & Retailer of Pair Unshielded Internal Cable, Shielded Keystone Jack Tool, Keystone Blank Insert, Keystone Jack Termination Tool and Keystone Jack Holder.

Pair Double Jacket Cable

Norden Category 5E Cables exceed Category 5E/ Class D specification. It is tested to 100MHz frequency range and designed to support Gigabit 1000Base-T applications to full 100m. Norden Category 5E double jacket cables used in digital distribution frames in transmission stations, fixed & portable indoor applications, harsh environmental outdoor applications with UV rated FR PVC outer Jacket.Extremely high pair-balance providing excellent EMC (Electro Magnetic Compatibility), minimizing radiation, maximizing noise immunity and providing high alien cross talk performance.

View Complete Details

Pair Unshielded Internal Cable

Norden Category 5E Multi Pair Cables exceed Category 5E / Class Dspecification. It is tested to 100 MHz frequency range and designed tosupport Gigabit 1000Base-T applications up to 100m. Norden Category5E Multi pair cables are useful in backbone cabling and helps in avoidingmultiple runs of cable.
By design, Norden cables are manufactured to the highest qualitystandards, design requirements and materials to ensure that every boxprovides significant margin over ANSI/TIA-568-C.2 specifications forNEXT, Power Sum NEXT and Insertion Loss across the entire channel.
View Complete Details

Toolless Connector

Category 6 Toolless Connectors exceed Category 6 long lasting highperformanceand full support of all present and emergingapplications, including 1000BASE-T (Gigabit-Ethernet). High qualityoverall shield provides excellent EMC (Electro MagneticCompatibility), minimizing radiation and maximizing noise immunity, ensures long term resistance to corrosion from humidity, extremetemperatures, and airborne contaminants. Tested up to 250 MHz nover 100m. These are mainly used for patch-cord termination.

View Complete Details

Face Plate USA Standard

Norden offers a faceplates in USA standard to provide the basis for a wide range of possible information outlet combinations. These are available in blank (modular) forms with USA styles. The module features a designated area for labeling and these are supplied with M3.5 mounting screws.Norden faceplate is the ideal solution for office environments where multiple services need to be supplied at one location.

View Complete Details

PVC Face Plate

Norden offers a variety of faceplates to provide the basis for a wide range of possible information outlet combinations. Norden faceplates accept any combination of Nordens keystone jacks, Euro-LJ6C, blank modules, brackets etc and are available in both angled & flat versions. These are available in shuttered and blank (modular) forms with UK or Euro styles. The module features a designated area for labeling and comes with both a blue data tag and a red voice tag for instant outlet identification. These are supplied with M3.5 mounting screws are interchangeable with Global UTP patch panels. Norden faceplate is the ideal solution for office environments where multiple services need to be supplied at one location.

View Complete Details

Steel Face Plate

Norden brushed stainless steel faceplates allow mounting any two combination of keystone Jacks or blank or Euro module. Stainless steel faceplates are ideal for use in environments that require greater durability and a sanitary, easy-to-clean solution. This face plate is ideal for space limited areas or desk-top trunking where a fixed number of ports are to be installed and modularity is not required.

View Complete Details

Shielded Keystone Jack Tool

NordenCat 6 Shielded Keystone Jack Tool Less 180Dare shielded with a two part case giving optimum protection from electromagnetic interference from an outside source. The rear casing is clicked into place after shielded cable has been fed through the centre and terminated to the jack. These Jacks are designed to reduce the Insertion loss & alien cross talk in order to provide maximum flexibility and high performance for all 10G Ethernet applications and are available in a 180 orientation with back interconnection of Dual IDC blocks in universal pin/pair assignment.180 orientation provides perfect termination with minimum distance to the IDC. This is tested to 250 MHz range over 100m and supports T568 A&B wiring & easy installation. The jack is manufactured with an integral cable strain relief. They can be installed into a number of faceplates and unloaded shuttered modules and backward compatible with category 5e/class D system components.

View Complete Details

TP Keystone Jack

Norden Category 5e UTP keystone Jacks exceed category 5e performance with component and channel performance to 100 MHz can be used in unloaded patch panels, faceplates and shutters, in a variety of colour options. These Jacks are designed to reduce the Insertion loss & Alien cross talk in order to provide maximum flexibility and high performance for all 10G Ethernet applications and are available in a 90 orientation with a dual termination block which will allow the installer to terminate with either a 110 or Krone insertion tool (Dual IDC). 90 orientation provides perfect termination This supports T568 A&B wiring & easy installation. The jack is manufactured with an integral cable strain relief.

View Complete Details

Keystone Jack Shuttered

UTP keystone jack with shutter exceed TIA/EIA and ISO component and channel performance, can be used in unloaded patch panels, faceplates and shutters, in a variety of colour options. These Jacks are designed to reduce the Insertion loss & Alien cross talk in order to provide maximum flexibility and high performance and are available in a 180 orientation with a dual termination block which will allow the installer to terminate with either a 110 or Krone insertion tool. This supports T568 A&B wiring & easy installation. The jack is manufactured with an integral cable strain relief.

View Complete Details

Face Plate Blank Cover

Blank cover fits on a wall plate, commonly uses when there is not e- nough modules to fill, available in quarter, half and full sizes.

View Complete Details

Keystone Blank Insert

Applicable for all NORDEN patch panel to maintain the configuration with its desired number of ports while balance empty port can be covered up with keystone inserts blank.

View Complete Details

Keystone Bracket

Bracket mounts a wall plate without back box and is commonly used as a snap in accessory for wall plates, available for keystone & fibre adaptors in 45, 90 angled. Norden wall plate mounting bracket inserts into the wall opening, flexible tabs bend up to secure the bracket to the opening. LJ6C angled brackets for floor boxes also available in 45 or 90.

View Complete Details

Keystone Jack Termination Tool

Norden Keystone Jack Termination tool is used for modular termination. This crimping tool was developed to meet the needs of the most discerning and quality sensitive installation professionals in multiple markets including commercial, residential, high end data centers & military. It delivers the better quality and consistent modular plug terminations .

View Complete Details

LAN Cable Stripper

Lan Cable stripper is ideal for stripping UTP cables and it can be used for punching on RJ 45 keystone jack as well as IDC 110 connector.

View Complete Details

Keystone Jack Holder

Norden Keystone Jack holder is designed to stabilize the keystone jack during the termination.It can reduce the punch down impact and can support of 90D & 180D of Cat 5e & Cat 6 Keystone Jack.

View Complete Details

Nonbonded-pair Cable

Norden Category 3 U/UTP cable exceeds Category 3/Class Cspecification. It is tested up to 16 MHz frequency range. Thesecables are used for voice and data communications and can handleapplication bandwidths up to 16 MHz. Other uses for these cablesinclude internal use on customer premises for the interconnectionof telephone key systems, PBX and intercom systems.

View Complete Details

Utp Cable

Norden Category 3 U/UTP cable exceeds Category 3/Class C specification. It is tested up to 16 MHz frequency range. These cables are used for voice and data communications and can handle application bandwidths up to 16 MHz. Other uses for these cables include internal use on customer premises for the interconnection of telephone key systems, PBX and intercom systems.

View Complete Details

Cross Connection Panel

Rack mount 19 cross connection panels provide horizontal management and organization of patch cables and jumper wire .They also incorporate legs for backboard mounting, allowing the cable to be routed from behind. This panel requires connecting blocks / clips. The Panels are available in 100, 200, 300 and 400 pair.

View Complete Details

Wiring Block

110 wiring system is the ideal way of terminating cable for cross connecting data and Voice, offering reliable and economical high-density system. This connecting block system is tested and verified to meet and exceed Category 6 connecting hardware performance requirements.

The wall mount wiring block is available with or without legs. Cable access openings allow cables to be routed through wiring blocks directly to point of termination. The speedy punch down on the block base ensure to reduce the installation time and cost. The termination of cable on 110 wiring blocks is achieved with the use of 110 tools. The blocks are available in 50 pair and 100 with or without legs.

View Complete Details

Wiring Identify Label Holder

110 wiring blocks allow designation labels to be mounted between each row of connecting blocks. Each label has 2-, 3-, 4-, and 5-pair markings and may be used for colour-coding services in accordance with TIA/EIA-606-A.

View Complete Details

Pole Protector Magazine

The magazines are designed for the complete equipped connection or disconnection modules. Compatible with overvoltage protection in analogue telecommunication systems. The overvoltage arrestors and the fail-safe elements can be replaced to new one. Designed for use with two or three pole overvoltage arrestors.

View Complete Details

Gas Tube Arrestor

3 pole overvoltage arrestor (metallic/ceramic) filled with noble-gas and optional fail-safe, type 8x13. Reliable limitation of over voltages and diversion of high currents.

View Complete Details

Wall Mounted Cable Distribution Cabinet

The wall mounted distribution cabinets are designed for easy installation. The metal bars can accommodate either connection or discon- nection modules. The Cable glands in various sizes and numbers for cable feed in through floor and roof rubber holes are provided with the cabinets. The boxes are manufactured in mild steel and finished in grey colour.

View Complete Details

Distribution Point Box External

The box can be mounted with 10, 20, 30, 50, 100pair LSA disconnection module. Waterproofbox suit external wire distribution. The box iswith key lock.

View Complete Details

Eurostyle BT Module

This Eurostyle BT module available as Master, PBX Master or secondary. This module compatible with Eurostyle faceplates. The termination for this module through 238A IDC connectors. Manufactured in.

This Eurostyle BT module available as Master, PBX Master or secondary. This module compatible with Eurostyle faceplates. The termination for this module through 238A IDC connectors. Manufactured in high quality ABS material.

View Complete Details

Pair Mounting Frame

This mounting frame is used in 19 cabinet for 10 pair modules. Manufactured in stainless steel and with cable manager. .

This mounting frame is used in 19 cabinet for 10 pair modules. Manufactured in stainless steel and with cable manager.

View Complete Details

BACK Mount Frames

Back mount frames consist of U-shaped stainless steel sheet provides high degree of stability and full corrosion resistance. Based on requirement, back mount frames can be used to fix various number of modules.

View Complete Details

Patch Plug

This patch plug design utilizes internal pair isolation and layered contacts to improve crosstalk performance. Additionally, plug housing includes built-in polarization to ensure a proper mated connection to connecting blocks. 110 patch plug is tested and verified to meet and exceed category 5e ANSI/TIA/EIA-568-B.2 connecting hardware specifications to support both high-speed data and voice applications.

View Complete Details

Breakout Cable Assembly

Singlemode or Multimode cable.From 6 cables to 48 cables, With SC, ST, FC, LC, MTRJ or E2000 connector.Low insertation loss, High return loss
View Complete Details

Fibre Optic Adaptor

Nordens fibre adaptors are available for all standard connector types in both single mode and multimode including Simplex and duplex versions. Single mode adaptors are available with either Zirconia or phosphor bronze sleeves. Zirconia sleeves provide tighter tolerances, generally required for angled physical contact (APC) connectors. Multimode adaptors are available with phosphor Bronze sleeves, which provide good performance for spherical polished connectors. The adaptor sleeve aligns the ferrules and holds them in place. The adaptors are colour coded allowing easy identification of the adaptor type. Norden hybrid Fibre optic adaptors are also available which are used to link different kinds of fibre optic connectors. Hybrid Adaptor specifications and functions are same as standard fibre optic adaptors.

E2000 FIBRE OPTIC ADAPTOR

Typical E2000 fibre optic adaptors are available by single mode PC and single mode APC, they are simplex fibre optic adaptors, SC patch panel mount type.

View Complete Details

Hybrid Fibre Optic Adaptor

Nordens fibre adaptors are available for all standard connector types in both single mode and multimode including simplex and duplex versions. Single mode adaptors are available with either Zirconia or Phosphor Bronze Sleeves. Zirconia sleeves provide tighter tolerances, generally required for angled physical contact (APC) connectors. Multimode adaptors are available with phosphor Bronze sleeves, which provide good performance for spherical polished connectors. The adaptor sleeve aligns the ferrules and holds them in place. The adaptors are colour coded allowing easy identification of the adaptor type. Norden hybrid Fibre optic adaptors are also available which are used to link different kinds of fibre optic connectors. Hybrid Adaptor specifications and functions are same as standard fibre optic adaptors.

E2000 - LC HYBRID FIBRE OPTIC ADAPTOR

E2000 to LC fibre optic adaptors are all plastic housing; these fibre optic adaptors are available with Phosphor Bronze sleeve for multimode and Zirconia sleeve for single mode.

View Complete Details

APC Single Mode Fast Connector

Norden Fast Connectors are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. TheseFast Connectorsare compatible with 0.9mm tight buffer, 2mm & 3mm drop cable. This connector during the installation process does not require any adhesive and curing process. It is possible to rework, so can be reduced the defect rate by workers connection error.

View Complete Details

FC Connector

Norden FC connector is comprised of a Nickel plated Brass body and a Ceramic ferrule/spring/crimp barrel assembly plus a crimp over sleeve and rubber boot. This connector has a screw thread fitting into the adaptor to provide a secure connection and is suitable for 900m, 2-3mm cable.The connector is precision made and manufactured to demanding specifications. The combination of a ceramic ferrule with precision Nickel plated Brass housing provides consistent long-term mechanical and optical performance. The FC connector is available in single mode UPC and APC versions as well as multimode.

View Complete Details

Fibre Optic Distribution Box External

The Optinor range of wallmount cabinets designed for external environment. It's available in different sizes with splice trays, cable management for splicing incoming and outgoing cables. It comes with locking and earthing systems with the complete protection of fibre cables and accessories. This fibre optic FTTH terminal box is developed for FTTH application . It is very light and compact, especially suitable for protective connection of fibre cables and pigtails in FTTH. It has a special sheilding protection from water & dust. We can use this box for both internal & external purpose.

View Complete Details

Fibre Optic Distribution Box Wall Mount Simplex

FTTH model of fibre optic terminal box is a newly developed for application of FTTH. This box is very light and compact, especially suitable for protective connection of fibre cables and pigtails in FTTH

View Complete Details

Fiber Optic Micro ODF

Norden Micro ODF has been developed for FTTH application.This box is very light and compact, especially suitable for protective connection of fibre cables and pigtails in FTTH.

View Complete Details

Fiber Optic PLC Splitter

PLC(Planar Lightwave Circuit)splitters are used to distribute or combine optical signals.It is based on planar lightwave circuit technology and provides a low cost light distribution solution with small form factor and high reliability

PLC Splitters are installed in each optical network between the PON Optical Line Terminal (OLT) and the Optical Network Terminals (ONTs) that the OLT serves. Networks implementing BPON, GPON, EPON, 10G EPON, and 10G GPON technologies all use these simple optical splitters. In place of an optical splitter, a WDM PONnetwork will use an Arrayed WaveGuide (AWG).

Passive Optical Network (PON) splitters play an important role in Fiber to the Home (FTTH) networks by allowing a single PON network interface to be shared among many subscribers. Splitters contain no electronics and use no power. They are the network elements that put the passive in Passive Optical Network and are available in a variety of split ratios, including 1:8, 1:16, 1:32 1:64, 2:8, 2:16, 2:32 & 2:64.

View Complete Details

Fibre Optic Splice Tray

Fibre Optic Splice Trays are used to protect and manage fibres& fibre splices, available in fusion type configurations. The traysare constructed for use with loose tube and tight buffered opticalcables designs, offer variety of unique and flexible splice and storagepossibilities.

The plastic tray consists of an injection-moulded, Black or Grey coloured plastic base that incorporates features to retain fibre loops and control the bend radius. The clear plastic cover allows visibility of the fibres for inspection without opening the tray. Tie-wrap holes provide strain-relief for buffer tubes and tight-buffered fibres. Unique strain-relief tabs are provided for multiple buffer tubes.

View Complete Details

Fibre Pigtail

Fibre pigtails are used in permanent connections between patch panels and incoming cables / single blown fibres.

Pigtails are pre-constructed with connectors. Connector options include small form factors such as LC, E2000 and MT-RJ as well as SC, FC and ST. These are based on 900m tight buffered cores (600m MT-RJ) and suitable for internal use only inside suitable Fibre Management Systems

View Complete Details

LC Fibre Pigtail

Fibre pigtails are used in permanent connections between patch panels and incoming cables / single blown fibres.Pigtails are pre-constructed with connectors. Connector options include small form factors such as LC, E2000 and MT-RJ as well as SC, FC and ST.These are based on 900m tight buffered cores (600m MT-RJ) and suitable for internal use only inside suitable Fibre Management Systems

View Complete Details

Fusion Splice Protector Sleeve

Norden fusion splice protector sleeves are available in 45mm or 60mmlength and are designed with a stainless steel strength member, Polyolefin copolymer inner tube and polyolefin outer tube for reliablefibre alignment during shipping, handling and installation. fibre splicesleeve is with clear colour to give a good view of the inside jointpart .The fibre splice sleeves are mainly used for single fibre spliceprotection, they can be with custom length and size on request.

View Complete Details

Wall Mount Optical Terminal Box External

The OptiNor range of wall mount cabinets designed for external environment. The cabinet structure is welded and painted with electrostatic spray coating. Its available in different sizes with splice trays, cable management for slicing incoming and outgoing cables. It comes with locking and earthing systems with the complete protection of fibre cables and accessories. It provides 40 mm bending radius fibre cables

View Complete Details

Media Converter

The NORDEN Media Converters were specifically designed tooffer network designers the tools for migration from copperbased Gigabit to fiber based Gigabit Ethernet. Now, migrationor expansion of existing networks can be achieved withminimum cost and complexity. The converters are completelytransparent when installed so the network performs exactlythe way it would do normally-only now, it can migrate bothcopper and fiber mediums. This flexibility in cabling allowsnetwork managers to put fiber cables anywhere with in anetwork without changing the arrangement of copper basedGigabit segments. Their compact size allows the converter tobe easily deployed in any narrow desktop location or used inwall-mount installation to save space.

View Complete Details

Media Converter Rack Chassis

Fiber converter rack (2U) from NORDEN is a kind ofeconomical converter rack used in machine rooms. The rackcan accommodate maximum 16 different types of fiberconverter module cards. There is an active and standbypower system in a centralized manner, supporting automaticswitching.
View Complete Details

Rack-Mount Splitter Chassis

This optical splitter chassis is standard 3U 19 rackmountedtype frame. Suitable for different kinds ofequipment which is designed according to 19 cabinet, canloaed with 12pcs small splitter box.
View Complete Details

High Density Data Center

High density Fiber solutions

IT operations are crucial to organisation for business continuity. Data centers are the central location for data interchange in IT operation of organisations and networked server farms. Ribbon fiber cables, array-based fiber connectors, and packaged breakout assemblies provide modular small form factor connectivity and enable fast, reliable interconnection of fiber optic links in high-density data center environments. Higher bandwidth requirement for 10G/40G/100G parallel optics, requirement to reduce cable size for better air flow, structured zone approach, reduction in rack space, higher density of servers and ports and reduction in installation time has brought in requirement for factory terminated high density cabling solutions. Factory terminated cable systems reduce installation time and offers scalable design and implementation.

MTP High density solution.

Norden MTP high density cabling solutions utilizes MPO (multi fiber push on) ferrule providing connection of 12 or 24 fibers. MTP provides superior physical and optical characteristics than standard MPO for precision alignment with spring loaded mechanism and guide pins. They have a removable adaptor that mates female connectors to a male connector with specially designed guide pins for orientation and maintaining polarity along the channel. The Micro-core cables used in factory terminated MTP fiber cable assemblies give 65% reduction in cable size from traditional fiber cables. Pre-connected MTP solution with 24 core LC duplex adapters offers 72 LC terminations in 1U rack space and 288 LC terminations in 4U rack space using modular patch panels.

High Density Fiber Optic Patch Panel

MTP Patch Panels are scalable modular which are designed for high density Gigabit Ethernet Applications. They are used for terminating backbone cables at the Main Distribution Area (MDA) and Horizontal Distribution Area (HDA). MTP Patch Panels are available with 1U and 4U, suitable for standard 19 racks. 1U MTP Patch Panel can accommodate up to three MTP Cassettes, giving a high connectivity of 72 LC fiber terminations in it. 4U MTP Patch Panel can accommodate up to 12 MTP Cassettes, resulting in a maximum of 288 LC terminations per panel.

High Density Fiber Optic Patch Panel

Understanding Polarity:

The TIA-568-C.0 standard provides Parallel transmission fiber polarity guidance for systems using MPO optical connectivity. The TIA-568-C.0 standard includes guidance on three methods identified as Method A, Method B and Method C. Pre-connect MTP Solution standardizes its products on Method A for both the multimode and single mode fiber systems. This is the most flexible and reliable method . simple to install, operate and maintain. Method A has the most flexible and reliable method for the following reasons:Customers expect systems based on standards. Standards incorporate best practices and incorporate paths to upgrade as technology advances, so system investments are better protected from risk of obsolescence.Customers need flexibility. Method A provides the most flexible options for current system designs and includes an easy path to migrate to higher data rates via parallel optics.

TYPE A ADAPTER CONFIGURATION

Method A

Method A employs Key Up to Key Down Adapters to link straight-through Key Up to Key Down ribbon cables to fiber cassettes (see Figure ). This method maintains registration of Fiber 1 throughout the permanent link: Fiber 1 in the near-end cassette mates to Fiber 1 in the ribbon cable assembly, which mates to Fiber 1 in the remote cassette. The fiber circuit is completed by utilizing one flipped patch cord, either at the beginning or end of the permanent link, to move Fiber 1 into the Fiber 2 position at the face of the remote cassette to ensure proper Tx-Rx orientation.

MTP Fiber Optic Solution includes:

MTP Cassette, 12 or 24 SC, LC PortsMTP Trunk CableMTP Fan-out Hydra Cable with LC or SC ConnectorsModular Patch Panel

MTP Connectors type:

MTP MM MT Elite Multimode MT FerruleMTP Standard Multimode MT FerruleMTP SM MT Elite Single-mode MT FerruleMTP Standard Single-mode MT Ferrule

MTP Cassette

LC to MTP and SC to MTP Fiber modules provide a quick and efficient way to deploy up to 24 LC or 12 SC fiber ports in a single module. These factory terminated and tested ports are protected within the housing for reliably high performance and simply connected via 12-strand MTP ports. Modules are available in OM3 , OM4 & SM fibre .Modular fiber cassettes are enclosed units that contain 12 or 24fiber factory terminated fan-outs inside.These cassettes serve to transition small diameter ribbon cables terminated with a MTP connector to the more common LC or SC interface used on the transceiver terminal equipment.The fan-outs typically incorporate SC, LC connectors plugged into adapters on the front side of the cassette and a MTP connector plugged into a MTP adapter mounted at the rear of the cassette.One or more MTP fan-out assemblies may be installed inside the cassette to connect up to two 12-fiber ribbon cables for a total of 24 fibers. Alignment pins are pre-installed in the MTP connector located inside the cassette

MTP Adaptors

MTP adapters provide quick connection for up to 24 optical fibers. Connection integrity is provided by adapter latches which are locked into place by a spring loaded sliding mechanism on the MTP connector plug. Precision alignment is achieved with patented MTP connector guide pins combined with the tightly controlled guide pin holes on MT ferrules. Numerous single port and ganged configurations are available to satisfy a variety of applications. MTP adapters are fully compliant with IEC Standard 61754-7 and TIA 604- 5 Type MPO.

MTP Trunk Cable

Pre-connector MTP Trunk Cable Assemblies are made up of 12, 24, 48 fiber LSOH jacketed micro cables terminated at both ends with MTP Connectors (without pins). These are used as backbone or horizontal cable interconnections . These plug and play solutions with micro core cable maximize bend radius and minimize cable weight and size. MTP Trunk Cable are factory pre-terminated, tested and packed along with the test reports. These assemblies are available in OM3, OM4 and SM fiber. Standard lengths of 5, 10, 25 meters are available. Custom lengths are also available on request. The MTP Trunk cables are packed as coils in lengths up to 50m long and on reels . OM3 and OM4 cables are available in aqua and SM cables are in yellow color.

MTP Fan-out Hydra Cable

Pre-connector MTP Fan-Out Hydra Cable Assemblies are designed for high density applications which require high performance and speedy installation without onsite termination. MTP Fan-Out Hydra Cable Assembly is made up of 12 LSOH jacketed cable terminated at one end in MTP connectors, through a bifurcation unit, to SC or LC connectors terminated on 2mm OD simplex cables. These are used to connect equipment in racks to MTP terminated backbone cables. MTP fan-out cables are numbered for full traceability.Available in 12 core configuration, these space saving assemblies comes with either MTP Male or MTP Female Connectors on one end and LC or SC Connectors on the other end. They are available in OM3, OM4 or SM fiber in lengths of 5, 10, 25 meters, custom lengths are available on request.

View Complete Details

Central Loose Tube FRP Strength Optical Cable

Non metallic FRP strength members in the cable give it good tensile strength and electro- magnetic protection. It has small diameter, light weight and thicker wall PE protection, giving it versatile applications. It can be used in cable assemblies, external distribution and transmission, places of high electro-magnetic interferences. Single jelly compound filled loose tube containing up to 12 fibres. PE sheath protects cable from ultraviolet radiation and heat, so can be used for external applications. The cable is suitable for ducts and aerial applications for service drop cable, building interconnection in campus LAN, distribution and trunk cables.

View Complete Details

Triple Jacket Galvanized Steel Wire Armoured External Cable

This single mode type fiber optic cable is constructed for underground application. The fiber cores shall be identical and capable of transmitting either data or voice signals. The fiber shall have loose secondary coating of high modulus plastic. The tubes are filled with a filling compound and the center of the cable contain a strength member. The tubes with fiber shall be stranded around the strength member into a compact and circular cable core by application of suitable core wrapping material. Two 24 Core fiber optic cable shall be laid along with each 33KV underg round cable circuit.
The cable structure is completed by application of galvanized steel armouring and a MDPE outer jacket. The Cable shall be installed in a100mm diameter PVC duct and also be suitable for direct burial in the ground.
View Complete Details

Steel Tape Longitudinal Layer Stranded Optical Cable

These cables are constructed with a multiple tube filled with water blocking jelly giving very high fibre count up to 144 fibre stranded fibre optic cable, they form the backbone of high speed networks. They give flexibility and versatility to networks. Metallic / Non metallic FRP strength members in the cable give it good tensile strength, A corrugated steel armouring give this cable excellent tensile strength, mechanical & rodent.This cable having special insulation of Flame Retardant PE which can give more resistance from fire. So it can be preferrable for Oil field , building interconnections, trunk lines, LAN and distribution networks.

View Complete Details

Aisle Rack

CACS (Cold Aisle Containment System)

By using cold aisle containment system, the hot and cold air streams are separated; providing significant energy savings over traditional uncontained configurations. High energy costs and consumption rates have forced professionals to consider hot-air and cold-air containment strategies. Aisle containment allows uniform inlet temperatures and eliminates hot spots typically found in traditional uncontained data centers.

Aisle Cabinet comes with end-of-row dual sliding doors and ceiling panels that enclose the cold aisle between rows of DataCAB Cabinets to prevent mixing of cold and hot air, optimizing cool air delivery. Integral Low Profile Ceiling Structure reduces cooling energy costs.

Computer room air conditioning (CRAC) monitors and maintains the temperature, air distribution and humidity in the data center. CRAC units are replacing air-conditioning units that were used in the past to cool data centers due to higher efficiency and lower power consumption

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us