Epoxy Coatings #5833794

DESCRIPTION:

TUFFROOF is a special polymer based fire resistant, flexible coating. It is specially formulated for use over most type of thermal insulation, both interior and exterior.

USES:

TUFFROOF is used for sealing and fitting, piping, vessel ducts and equipment operating at below ambient temperatures. TUFFROOF exhibits excellent adhesion on mineral wool, glass fiber and polyurethane foam. It is safe in all environments because it is water based and it provides seamless liquid membrane.

ADVANTAGES:

Elastic, crack bridging and toughVapour barrier and weather proofExcellent adhesionSmooth finish on almost all substratesCan be used internally and externallyEasy to apply and water washable.

DESCRIPTION:

TUFFROOF is a special polymer based fire resistant, flexible coating. It is specially formulated for use over most type of thermal insulation, both interior and exterior.

USES:

TUFFROOF is used for sealing and fitting, piping, vessel ducts and equipment operating at below ambient temperatures. TUFFROOF exhibits excellent adhesion on mineral wool, glass fiber and polyurethane foam. It is safe in all environments because it is water based and it provides seamless liquid membrane.

ADVANTAGES:

Elastic, crack bridging and toughVapour barrier and weather proofExcellent adhesionSmooth finish on almost all substratesCan be used internally and externallyEasy to apply and water washable.

STORAGE:

When stored in original, unopened container the average life is 12 to 14 months at 20C to 30C.

HEALTH AND SAFETY INSTRUCTION:

Caution should be always exercised with all the construction chemicals. Gloves and goggles must be worn while using these chemicals. Any splashes to the eyes or skin should immediately be treated with fresh water. Should any of the products be accidentally swallowed, do not induce vomiting and call for medical help immediately.

DESCRIPTION:TUFFCOAT 30 -36 is water based protective coating for thermal insulation application and has excellent adhesion to canvas and other insulation material. USAGE:It is used for thermal insulating materials on air conditioning ducts, cold water pipes and vessels. It is used for foam insulation like polyurethane foam, glass wool, rock wool, and glass clothes. ADVANTAGES:High strengthDurableAntifungalWater resistantAbrasion and fire resistantNon toxic, non flammableEconomical to use

TECHNICAL DATA SHEET SPECIFICATION:

Colour : WhiteSpecific Gravity : 1.40+0.02Solid Content :-18C Strength : Formulated to Meet requirement To MIL -3316BClass1: amendment 2 for wet and dry strengthFlammability :Non Flammable(wet state)Water :Formulated to meetResistance : Requirement of MIL A 3316-B Class 1, amendment 2Water Vapor : 0.87 metric permsTransmission : at 0.8 mm (DFT)Ph : 8Bonding Time : 30minsDrying time : 2 hrs touch, 8 hrs complete depends upon weather conditionAdhesion strength : 2.25N/ (Bs1881)

Jacket ensures the ends are lapped to provide a definite seal. Apply a second coat TUFFCOAT 30 36 jacket to protect pipe covering. Canvas can also be dipped directly where saturation and shrinkage are required. The product should not be thinned and shouldnt be applied in excess temperatures (> 100C)

COVERAGE: 4 5 SqM/lit

PACKING: 20 Lit/Pail

STORAGE & SHELF LIFE:

When stored in original, unopened container in a cool, dry place, has shelf life of 12 months.

CLEANING:

Clean tools and adhesive with water.

HEALTH & SAFETY:

Non-Hazardous and Non-Toxic. In case of contact with eyes, clean with plenty of water and call for medical advice.

This data is provided in the belief that it is accurate within generally accepted standards and is provided for the information of the qualified personnel. It does not constitute an offer by the manufacturer, nor does the manufacturer warrantee or guarantee its accuracy or completeness in describing the performance or suitability of the various products. The users therefore should make their own determination in using the product of the data contained herein for any application.

TUFFCOAT 30-36 AF is specially formulated anti-fungal water based adhesive and coating for bonding and Coating canvas cloth, glass cloth, or other lagging jackets over thermal insulation and suitable for use in tropical areas where high temperature and humidity are a problem. It is designed to resist mild fungus and mild growth, and protect the insulation from discoloring or deteriorating effects. TUFFCOAT 30-36 AF is a non flammable in wet state and fire retardant when dry. TUFFCOAT 30-36 AF has the same qualities and results of the standard 30-36 with the features of indoor/outdoor use and excellent fungus resistance.

COLOR : WhiteODOR : Blend in wet state. Odorless when dry.BASE : Synthetic elastomers emulsion

VOC CONTENT : Volatile organic compounds 58 grams/lit less water.DENSITY : 10.5 + 0.2 LBS/GALSOLIDS CONTENT : 60% + 2%VISCOSITY :50000-60000CPS(Brookfield)COVERAGE : Upto 180sq.ft/gal

Depending on texture of insulation, application temperature ranges from35F to 120F.

Service Temperature Range: 0F to 200F.

BONDING RANGE: Upto 40 minutes

STORAGE: Keep from Freezing

SHELF LIFE: One Year in unopened containers.

CLEAN UP: Warm water and soap when wet, mineral spirits when dry.

WATER VAPOUR PERMEANCE: 0.8 perms (19 mll DF) ASTM E-96 Procedure B 0.03 perms at 0.028 in dry film thickness (0.02 metric perms and 0.7 mm) as per ASTM F-1249. Tested at 120F (48.88C) and 90% relative humidity.

PHYSICAL AND CHEMICAL RESISTANCE: Good resistance to water oil grease etc. while having excellent resistance to aging 30-36AF is good for use both interior and exterior application.

APLICATION SUGGESTIONS: Brush on a lagging cloth to hold and follow with a double coat for finish. Certified that TUFFCOAT 30-36AF exceeds the requirements of NFPA 90A & 90B confirms to ASTM E 84.Surface burring characteristics applied to inorganic reinforced cement board.

Flame Speed : 5

Smoke Developed : 5

Tested as applied at a coverage range of 90sq.ft per gallon. Flash point of adhesive (closed cup) No Flash point to boiling.

TUFFCOAT 30-80 is a special polymer based fire resistant, flexible coating. It is specially formulated for use over most type of thermal insulation, both interior and exterior.

USES:

TUFFCOAT 30-80 is used for sealing and fitting, piping, vessel ducts and equipment operating at below ambient temperatures. TUFFCOAT 30-80 exhibits excellent adhesion on mineral wool, glass fiber and polyurethane foam. It is safe in all environments because it is water based and it provides seamless liquid membrane.

ADVANTAGES:

Elastic, crack bridging and toughVapour barrier and weather proofExcellent adhesionSmooth finish on almost all substratesCan be used internally and externallyEasy to apply and water washable.

APPLICATION:

The surface must be clean and free of any dust, dirt, oil, grease and loose particles.

Apply an even coat of TUFFCOAT 30-80 by brush or spray. It should spread out equally on surface. Once the initial coat dries, apply finish coat by brush or spray.

PACKING:

Available in 20 lit. plastic bucket.

COVERAGE:

2 Sq.M app. @ 650 micron

STORAGE:

When stored in original, unopened container the average life is 12 to 14 months at 20C to 30C.

HEALTH AND SAFETY INSTRUCTION:

Caution should be always exercised with all the construction chemicals. Gloves and goggles must be worn while using these chemicals. Any splashes to the eyes or skin should immediately be treated with fresh water. Should any of the products be accidentally swallowed, do not induce vomiting and call for medical help immediately.