Distribution Board in UAE

• Mounting : Flush / Surface
• Color : Beige (RAL1001/RAL1013)

Specifications Standard: IEC 61439-3 Phases: 1, 2, 3 phase Number of Ways: For 1 Phase panel: 4 Ways to 12 Ways For 2 Phase panel: 4 Ways to 8 Ways For 3 Phase panel: 6 Ways to 48 Ways Main Breaker MCB type: 32A to 100A MCCB type: 30A to 400A Branch Breaker: MCB type: 6A to 63A / plug-in type / 1, 2, 3 pole e more...

• Form of Construction : Form 2
• Rating : up to 125A
• Application : Building & Industrial Sector
• Outgoing : Miniature Circuit Breakers
• Income : Isolator/ MCCB
• Operational Conditions : Indoor
• Project Type : Row type & VTPN
• Rated Short Circuit Rating : 20kA for 0.2sec
• Mounting : Wall mounted

more...

• IP Rating : IP44 to IP66
• Incoming Devices : MCCB, ELCB or Isolator
• Design Standard : IEC
• Voltage : Ue - 660V
• Outgoing Devices : TP or SP, MCCB’s

These distribution boards are designed to have a continuous current rating and a required short circuit rating. Generally are MCB type DB with pre fabricated fully shrouded bus bar assembly. The enclosures are of a folded and bolted construction fabricated out of 1mm to 2mm galvanized electro-galvanized sheet more...

• Voltage : 4000 A

SWITCHGEARS AND DISTRIBUTION BOARDS * Low Voltage Switchgears-up to 4000 A * Distribution Switchboards * Feeder Pillars * MCC panels more...

• Range : • Single Phase • Three Phase • Single Door • Double Door

Electrical energy has brought along with it a lot of conveniences, beyond imagination. It's consumption has increased manifold be it in domestic, commercial or industrial applications, there by creating a need for scientific & effective method of distribution. The purpose of electrical wiring is to systematic more...

• Colour : RAL7035 grey
• IP code : IP65
• Resistance : chemical agents, weak acids, alkali, oils, salts, etc.
• Operating Temperature : -35°C + 65°C
• Rated Voltage : up to 690V
• Material : ABS
• Maximum Current : up to 800A
• Thermal Deformation : over 240°C

Plastic distribution boards of various sizes. Intended for extension or distribution of cable lines. They can also be used as meter boxes. They are resistant to chemical agents, thermal and UV rays.    Recyclable • adjustable mounting plate position   MOUNTING: • Vertically on flat surface more...

• resistant wire : 105
• Model : 250

Final Distribution boards rated Upto 250A fulfil complete range with custom design and according to client requirement. Available for Single Phase and Three Phase with protection standard of IP-31 Upto IP-55.RATED : Short Circuit Upto 15 KAWIRING: Using heat resistant wire ( 105 ) trirated BS 6231 with copper more...

These are distribution boards which although similar construction, are larger than a final circuit distribution boards. The boards are installed half way through the mains distribution system, generally at the point where a large distribution cable terminates, and several smaller sub-circuits start. The board more...

Final Distribution boards rated Upto 250A fulfil complete range with custom design and according to client requirement. Available for Single Phase and Three Phase with protection standard of IP-31 Upto IP-55. RATED : Short Circuit Upto 15 KA WIRING:  Using heat resistant wire ( 105 ) trirated BS 6231 with co more...

3-Phase and 1 Phase Distribution Boards Conform to Standard IEC 61439-3 Maximum Voltage 480V A/C Protection Class IP- 41 Reversible Door for Left/Right Opening Ambient Temperature 50oC Continuously Available with Flush Or Surface type with different Archtrave type Zinc Coated Metal, Powder Coated to RAL 7035 more...

Apart from all the electrical components, a distribution board is the main part of a supply system, be it for commercial properties or your home. The main cable comes from a distribution board and then gives you a proper supply of electricity for all the switches and appliances. Hence, the performance and des more...

Final Distribution boards rated Upto 250A fulfil complete range with custom design and according to client requirement. Available for Single Phase and Three Phase with protection standard of IP-31 Upto IP-55. »  RATED : Short Circuit Upto 15 KA WIRING:  Using heat resistant wire ( 105 ) trirated BS 6231 wi more...

We manufacture DCDB panels that are designed as per customer specifications. Our in-house fully vertical integrated processes such as magnetics, panel manufacturing, wiring, assembling ensures strict adherence to quality standards over the manufacturing process. These panels are designed for outdoor and indoo more...

DEWA, SEWA, AADC standards & regulations SMDB LV panels complied as per BS EN-61439-1 and as per DEWA, SEWA, AADC standards & regulations. A Type tested assemblies to BS EN 60439-1 . The design is according to client requirements. Routine tests are conducted on all Sub Mani Distribution Boards according to IE more...

Power Distribution Boards (PDB) / Main Distribution Boards (MDB):  Power Distribution Board consists of Main Incomer of 250A/400A/630A etc upto 2500A or 4000A with metering and indications and various numbers of outgoing feeders of different ratings . Provision of ALPHA TECHNO Electrotal / Vertical Busbars o more...

Loadbank Sub Main Distribution Boards, are Fully Type Tested to the latest BS EN 61439-2 standards.  It is a Wall Mounting, Sheet Steel clad assembly with busbar ratings of 250A, 400A and 800A TP & N available in fault ratings of 25kA for 1 second, 25kA for 3 seconds, 36kA for 1 second and 50kA for 1 second. more...

The Schneider Distribution Board is specially designed for all housing and residential applications. These Distribution Boards come with rated current of 6A-40A and combine the following functions i.e. Short circuit Protection and Overload Protection. The Multi 9 series offers the best optimum final Distribut more...

Description Type tested and compliant with IEC 61439-3 Options for MCCB, Isolator, MCB or RCCB Incomers Capable of accepting MCB and RCBO outgoing devices Fault withstand 15kA Floor or wall mounted with Surface or Flush mounting options Easy to install Protects against electrocution and fire caused by short c more...

ystem that divides an electrical power feed into branch circuits while providing a protective fuse or circuit breaker for each circuit in a common enclosure. In essence, panelboards are used to protect against electrical overloads and short circuits while distributing electricity throughout a building or faci more...

A distribution board is a panel or enclosure that houses the isolator, circuit breakers, and ground leakage protection units used to distribute electrical power to numerous individual circuits or consumer points. The board typically has a single incoming power source and includes a main circuit breaker and a more...

We offers compact Final distribution boards (FDB), a design aimed for safety, reliability and availability in the electrical building installation.Available in busbar and multi row types. Surface or flush mounting on requests and requirements. TECHNICAL SPECIFICATIONS Single row type:Range : 6, 9, 13, 18 and more...

Main Distribution boards upto 3200A MDB Construction from Form II upto Form IV Type 7 As per authority and IEC standards more...

TYPE – TYPE ‘A’ & TYPE ‘B’ INCOMERS – MCB / ELCB OR ISOLATOR SPLIT SECTION AS REQUIRED WITH OR WITHOUT PAN ASSEMBLIES FLUSH / SURFACE TYPE TOP AND BOTTOM ENTRIES APPLICATION  :- INDUSTRIAL /RESIDENTIAL AND COMMERCIAL SPECIFICATIONS  :- BS STANDARD – 5486 – 1 EASY IN MAINTENANCE, FINE QUALITY more...

We are offering Main distribution Boards ( MDB’s ) up to 800A, Sub Main Distribution Boards ( SMDB’s), Final Distribution Boards, Power Distribution Boards etc. more...

Sheet thickness 1.2mm Powder coated with polyester powder RAL 7032 (other colors optional) Tested as per IEC60529 for ingress protection class IP41 43. more...

Row-type modular distribution boards Type-tested Panel Boards Way-type Distribution Boards Monobloc wall-mounted and floor-mounted IP rated Enclosures Sheet steel/ Stainless steel and Polyester (GRP) Enclosures Terminal and industrial boxes Data and communications network Enclosures more...

The Schneider Distribution Board is specially designed for all housing and residential applications. These Distribution Boards come with rated current of 6A-40A and combine the following functions i.e. Short circuit Protection and Overload Protection. The Multi 9 series offers the best optimum final Distribut more...

Complying with IEC-61439 1&2, Rated 400A, 800A, 1000A, 1600A and 2500A in form II, III and IV (Type 6) Construction.  ASTA Certified 50 kA /3 sec for 2500A, 50kA/1 sec for (1600A, 1000A, 800A) and 35kA /sec for 400A  Rated current up to 2500A  Rated operating voltage up to 400V and Frequency 50 Hz  Protec more...

FEATURE Form - 4 Type Up to 4000A Form - 2 Type Up to 4000A Feeder Pillar Sub Main Distribution Board Final Distribution Board Capacitor Bank Products. more...

Target has purpose-built modular electrical distribution boards built with the elasticity of rental operations in mind. These electrical distributors add in a range of features to enable the assembly to be reconfigured to different distribution combinations. The units are designed for the outdoors with weathe more...

We are one of the famous company, who are manufacturer of final distribution boards. more...

We deals in supplying of wide range of Sub Main Distribution Boards. more...