Our Products
Heating Components
2 Products availableInstrumentation & Control Equipment
1 Products availableSolar Water Heater Accessories
1 Products availableAutomotive Components
1 Products availableIndustrial Boiler
1 Products availableWe offer the best product range of weather-guided control system and Buffer and multifunctional-storage.
auroSTEP solar water heater is manufactured in a German plant which is one of the most modern plants in Europe, with exclusive Vaillant components, with maximum quality, robustness and reliability.
Our system is innovative and different compared to competitors products in its function and its manner of installation. It is a well-outlaid drainback system with high efficiency. In the interior of the installation we find a solar liquid (mixture of glycol and water) and air, therefore there is no need for determined hydraulic components as for example expansion vessel, exhaust fan, manometeretc. as there is practically no pressure in the system.
When the central control unit puts the integrated pump in function, it begins to transport the solar liquid from the serpentine of the accumulator through the tubes to the solar panels where it is heated and sent back to the accumulator to heat the stored sanitary water. During standby the solar liquid is stored in the tubes at the bottom of the system, the collector contains nothing but air. Therefore there is no loss of efficiency due to stagnation of the system, different from pressurized solar systems.
Our auroSTEP rangeauroSTEP plus 1.150/2.250/3.350:
Our newly launched auroFLOW plus Solar Thermal Drainback System combines all of the advantages of the very latest Vaillant solar technologies in an easy to specify and install pre-assembled kit. auroFLOW plus is the result of intensive research and development. Its the most advanced Solar Thermal Drainback system on the market and is designed to offer maximum efficiency, high performance and total reliability.
This easy-to-install system comprises a collector array, high efficiency pump, drainback vessel, heat exchanger and control. Also, auroFLOW plus takes up less space, all components are contained within the module, and the use of standard 15mm and 22mm copper pipe with compression or hard soldered / brazed fittings. auroFLOWs on-demand reheat cycle is unlike traditional solar systems that can go into stagnation, as the solar fluid drains back into the vessel once hot water demands are met.
We have designed and developed auroFLOW plus for properties with higher daily water usage a versatile, quick and easy to install Solar Thermal Drainback system that comes with our market leading stamp of innovation, quality, reliability and support.
auroFLOW differs from pressurised systems by enabling solar fluid to drain from the collectors back into the system when the hot water demand is met . The system design prevents solar liquid from stagnating making it ideal for all applications where hot water is not required during shutdown periods. By their very design, drainback systems are far simpler than pressurised systems. They are lower maintenance, more easily specified and require less time to install.
auroFLOW plus can be used alongside conventional Vaillant hot water heating systems - VPM 15 D for up to 6 collectors, the VPM 30 D for up to 12 collectors or even larger commercial systems requiring more than 12 collectors, up to 4 collector arrays can be used totalling 48 collectors. The VRC 630 conventionally controls Vaillant cascade boilers, however where auroFLOW Plus is added to the system the VRS 620 can be used.
VRS 620 features
The collector isMCSapproved so it qualifies for appropriategovernment grants and incentive schemes
Vaillant auroFLOW plus solar systems:
Vaillant's auroSTEP pro solar water heating system contains a storage which is installed on the roof directly above the collector/s. Well crafted collectors, enameled "tank-in-tank" storages and a coated mounting bracket give the system the known Vaillant quality. The storages are available in the capacities of 150, 200 and 300 liters of domestic hot water.
When the solar earnings are not sufficient to cover the warm water demand, electrical backups of 2 or 3 kW can be added to the slar water heater. You get further warm water comfort without big installation efforts.
auroSTEP pro at a glanceAs well as the three stage filtration and de-ionisation as standard, the exclusive range further enhances the air quality with an ultra violet bacteria reducing modulet. climaVAIR exclusives modern thin 165mm flat-fronted design with its unique concealed vent operation offers the perfect solution for homes, offices and shops.
Functions include remote setting of temperature and operating mode, fan speed, louvres, timer and sleep function and air quality settings. climaVAIR exclusive has bright white display for easy identification of the settings and temperatures.
climaVAIR exclusive high wall mono split system models
Mono inverter air to air heat pumps: A range of 2 models with heat outputs from 3.6kW to 4.5kW
auroTHERM flat plate collectors VFK 135 D available in two arrangements vertical and horizontal, consist of a laiser welded copper grid absorber coating, a toughened 4mm thick solar glass cover and high efficiency 40mm rear and side insulation. The whole assembly is encased in a polished aluminium frame for a neat construction. The collectors can be connected in series in horizontal or vertical orientation to suit the available roof space.
auroTHERM flat plate collectors consist of an laiser welded copper grid absorber coating, a toughened 4mm thick solar glass cover and high efficiency 40mm rear and side insulation.
The whole assembly is encased in a polished aluminium frame for a neat construction.
The collectors can be connected in series in horizontal or vertical orientation to suit the available roof space.
Luke-warm or boiling hot water: the VEK supplies hot water to the kitchen sink within the split of a second with a temperature infinitely variably set between 30C and the boiling point. Once the desired temperature is reached, the appliance automatically cuts off.
Easy and safe operation
The VEK offers special comfort thanksto the automatic interval boiling function: when the water cools down, the VEK automatically switches on again. The VEK 5 L indicates by humming that the set temperature has been reached. A temperature limiter provides the required safety: if the water boils off unnoticed by the user, the VEK automatically cuts off.
Perfectly fits into the kitchen
Thanks to its low height, the neutral colours and its modern, easy-care design, the VEK perfectly fits into the kitchen.
AuroMATIC 620/3 controller offers rich comfort and it is a unique product on a market. Controller regulates not only solar systems but complete heating/cooling plant. The weather-guided control system automatically raises or lowers the setpoint temperature of the system depending on the outdoor temperature. Thanks to intelligent technology solar system and heating/cooling plant are optimally interconnected.
With individually adjustable heating/cooling programs of auroMATIC 620//3 every user can simply and fast adjust the system according to his needs. Controller is equipped with graphical display and can be placed anywhere in the living area to provide intuitive use and comfortable operation. The clock will however automatically adjust summer/winter daylight saving time thanks to integrated radio-time synchronization. Therefore programmable heating/cooling program will always be accurate according to plan. So you need not to worry about anything.
Short overview of advantages:
atmoCRAFT completely automated boiler with a build-in two-level atmospheric gas burner. Available output versions: 65-160kW. Low emission level and high average power efficiency for heating period (up to 92%).
Electronic system of ignition and control of flame existence. The boiler can be used as a heat generator in assemblies used for heating and hot water preparation. Can be combined with Vaillant solar systems and controls.
Whether the solar system is used for the generation of domestic hot water or space heating, the solar fluid has to be circulated within the solar circuit efficiently and effortlessly. The all new modulating solar pump station will get the job done with the least amount of energy, thanks to the new high efficiency solar pump.
The new solar pump station VMS 70 from Vaillant is a modern solar station with high-efficiency energy-saving solar pump is introduced with air separator, check valve, connection points and other essential features. All major components are assembled in a single cabinet can be easily hung on a wall for optimum space utilization.
Thanks to the new solar control from Vaillant auroMATIC 570, the speed of the pump can be automatically modulated to ensure optimum solar gain and system performance.
Benefits at a glance:
The small storage water heaters VEN 5, with the srorage capacity of 5 liters, are an ideal solution where only small quantities of hot water are required. In the kitchen for dishwashing or in the bathroom to wash hands: the VEN 5 guaratees energy-saving supply of domestic hot water thanks to the short pipework and a highly efficient CFC-free thermal insulation made of EPS shells. The sink storages are offered in two different lines: the premium VEN 5 exclusiv is equipped with a high-quality robust water tank made of copper while the basic appliance VEN 5 classic is equipped with a synthetical water tank.
Compact conveniences offered by VEH 10 U
Depending on demand, the appliances can be offered as an above-sink version VEN 5 O or a below-sink version VEN 5 U. Thanks to their attractive design their outer appearance always suits the ambience. If installed in extremely cold rooms, the appliances are protected against frost damages thanks to the automatic frost protection.
Comfortable and efficient
The VEN 5 meets the most exacting demands to comfort thanks to its infinitely variable temperature range adjustable between 7 and 85 C. The appliances operate particularly efficiently with the energy-saving setting at 60C. At the same time, this temperature guarantees that scaling is minimized. The activable scalding protection offers additional safety to the user. The stand-by energy consumption was reduced by more than 5% to up 0, 22 kWh/24h.
Quick installation
These appliances offer extremely comfortable installation: already existing appliances can be easily and comfortably replaced - already mounted supports can be used and the VEN 5 is directly connected to the power mains by means of its connecting cable with the shockproof plug. Complicate wiring is not necessary. Cables which are let into the appliance from below can be easily hidden thanks to the spare cable space.
Vaillant atmoMAG gas water heaters are especially designed for hot water generation. The latest atmoMAG line is the result of decades of continuous development and state-of-the-art technology, providing you with the highest level of warm water comfort and energy efficiency.
Convincing warm water comfort thanks to intelligent solutions OPTI MOD Function
Vaillant Gas Water Heaters atmoMAG owe their high warm water comfort to their integrated OPTI-MOD function. It ensures highest comfort with utmost efficiency. With two simple steps the users can adapt the atmoMAG to their individual requirements. OPTI. refers to the preselection of the appliances' water output between approx. 50% and 100%. As a rule the inlet water flow through the tap determines the outlet temperature. This method offers advantages with high inlet water temperatures. Since the incoming water is preheated, less gas is needed to reach the outlet temperature. This saves a lot of energy. .MOD: keeps the water temperature constant independently of how far the tap is opened. The burner flame adjusts itself automatically, thus the minimum gas rate required is used to heat the water up to the desired temperature chosen by the user.
The best starting sytsem for every requirement
All atmoMAG with OPTI-MOD function show the same high warm water comfort. However, their ignition systems may differ. The piezo ignition of the MAG XZ represents a perfect standard solution which has proven itself for decades. With increasing requirements on energy savings, the MAG XI is the one to count on. Its electronic ignition works with main connector or batteries. Giving up the permanent pilot flame leads to a remarkable saving of energy without interference in the various stages of operation. The batteries, if used, can easily be replaced at the front of the appliance. Their durability is a minimum of one year. Our model especially designed to meet basic requirements - please see our technical data.
Ground source heat pumps offer excellent energy savings as up to 75% energy for heating can be extracted from the ground. Energy from the ground is converted into useful energy by the heat pump, which works like a fridge. It uses electricity to run the compressor and controls and it is an excellent partner for underfloor heating, which requires low water temperature to heat the home. Suitable access is required to allow boreholes to be drilled or ground collectors to be installed.
Buffer and multifunctional-storage for all requirements and heating systems - with particularly efficient solar use.
Multifunctional storage allSTOR can be implemented with all kinds of heat generators: with Solarsystem, Heat pump, Gas, Oil, Pellet boilers, Fireplaces and CHP. You can select from six different sizes of 300-2000 liters to suite your needs. A cascade connection of storages can provides up to 6, 000 liters of hot water.
The allSTOR is the best choice for DHW and heating support and it uses the solar system more efficient than any other storage on the market. The plug-and-play station for solar chargeing and drinking water with its own control unit can be mounted directly on the storage or on the wall next to it. The allSTOR plus serves as temporary storage for heating water and thus increases the efficiency of any heating system.
Short overview of advantages: