ValTorque Valves Trading LLC

dubai, United Arab Emirates

Product group :Automatic Regulating Valves (ARV)
Fields of application :Water treatment Distribution network Industrial applications Power house Water transmission Irrigation Dams and hydropower Wastewater
Medium :Warm water Raw water Drinking water
Body :Steel Ductile Cast Iron .Carbon steel, low alloy steel, etc
Disc :Ductile Cast Iron .Carbon steel, low alloy steel, etc Steel
Sealing :NBR EPDM-NBR EPDM
Temperature C :Up to 70
Size (mm) :1000 - 50
Pressure (bar) :40 - 10
Price :
Description :Face to face: DIN EN 588-1 series 1(DIN 3202-F1)Flanges: DIN EN1092-2(DIN 2501)Product features:MIRAB control valves are used as regulating and control valves. The body is designed in eitherhorizontal or diagonal shape, with the internal configuration suitable for fluid flow. The valves arecontrolled automatically by a pilot valve and water flow. Automatic control valves do not require anexternal power source, meaning that the fluid pressure is enough for opening and closing the valve.The body interior and exterior is coated with epoxy powder.
The Automatic valve maintains the reduced downstream pressure at aconstant value irrespective of the changes in upstream pressure and flow rate, alsocontrols the outlet flow rate irrespective ofpressure variation.

Gate Valve, Soft Sealing Type, Resilient Seat

Product Description: Product Description:
A swing check valve is a check valve in which the disc, the movable part to block the flow, swings on a hinge to eithrswing onto the seat to block reverse flow or off the seat to allow forward flow.
Product Features:
Body and bonnet are bolted. The sealing is made of rubber (NBR, EPDM). The valve can be installed either in a horizontal or vertical position. It is virtually noiseless and capable of sealed closing even in low pressure situations. Sizes: DN 50 DN 200, Pressure: PN 10-PN 40
Applications:
Swing check valves are suitable for non-corrosive fluids, liquids, gas, steam and waste water in water industry, water distribution networks, dams, power plants, and irrigation facilities.
Technical Details:
Product Group : Non-Return (Check) Valves
Face to Face : DIN-EN-558-1 Series 48, ISO-5752 Series 48, DIN-3202-F6
Flanges : DIN-EN-1092-2 (DIN-2501)
Body and Bonnet : EN-GJS-400-15(DIN-EN-1563, DIN-1693)
Disc : EN-GJS-400-15(DIN-EN-1563, DIN-1693)
Lever : EN-GJS-400-15(DIN-EN-1563, DIN-1693)
Seal : EPDM / NBR
Lever and Disc Pin : AISI 420 (1.4021)
Cap : Brass
Seat Ring : AISI 304 (1.4301)
O-Ring : NBR
Screws and Washer : A2 (DIN-931)
Corrosion Protection : All casting parts are coated with epoxy powder RAL 5005 by electrostatic method.

Butterfly Valve, Double Eccentric, Flanged Type, F4

Air Valve, Single Chamber, Double Orifice, Triple FunctionProduct Description:In this type of valves aeration and air evacuation are carried out automatically in primary and secondary pipelines in sewage networks. These valves are light in weight due to their internal parts being made of plastic and their uniquedesign and this allows installation in lower altitudes. I have this text from product catalogue.
Product Features:Triple function: air release during the filling of the pipe system, air release under full operation and full working pressure, venting of air for vacuum breaking purposes.Automatic air venting of the fluid in the main pipe and supply lines. In these type of valves the fluid flow activates the venting operation. Large venting orifice allows large volumes of air to be released on start-up and enter thepipe for vacuum breaking on shut down. Small venting orifice allows volumes of air to be released under the fluid pressure. Unique feature and internal components of plastic materials result in low weight, allowing easy assembly on lines.
Applications:This type of valve could be used with sewage mediums at minimum pressure of 0.3 bars to a maximum temperature of 70 C.
Technical Details:Flanges : DIN-EN-1092-2 (DIN-2501)Body : EN-GJS-400-15[DIN-EN-1563(DIN-1693)]Bonnet : EN-GJS-400-15[DIN-EN-1563(DIN-1693)]Floater : AISI 304 (1.4301)Stopper : POMSeat : POMGuide Rod : AISI 304 (1.4301)Guide Screw : AISI 304 (1.4301)Sealing Rubber : NBR / EPDMBolts and Nuts : A2 (DIN-912) Medium : potable water, raw waterTemperature : up to 70 CSize (mm) : 50 200Pressure (bar) : 6 16Corrosion Protection : All internal components are made of plastic (HDPE 100) and are protected against corrosion. All casting parts are coated with epoxy powder RAL 5005 by electrostatic method.