Vani IT

United Arab Emirates


  • 4U Open-Frame Optical Distribution

    The 4U open frame optical distribution frame is made for 19 or 23 inch racks, or wall mounted, and can be rotated out to access the inside. It is available unloaded or pre-installed with your choice of fibre optic adapters and pigtails. It is ideal for indoor fibre optic cables connection, storage, ...

    View Details » Send Enquiry »

  • 9 Degree Patch Cord

    APC stands for Angle-polished Physical Contact (8 degrees angle ferrule cut) for very high return loss (>65dB) and represents one of the best ways of polishing for fibre ferrules, assuring a return attenuation greater than 50dB for single mode connections. We also offer 9 degree angled ferrule cut ...

    View Details » Send Enquiry »

  • Aramid Yarn Scissors

    Uniquely planned scissors for slicing through aramid yarn lined fiber patch strings. Produced using solidified steel with sharp serrated edges and reasonable for cutting a huge number of materials.

    View Details » Send Enquiry »

  • Auto Return Fibre Cleaver

    An ultra compact and outstanding quality fibre cleaver, this is designed for excellent portability and is ideal for use in the field with the OPTiFab Field Installable Connectors (FIC) or in FTTH applications. Available in various versions, including ones with a narrow lid auto-return a ...

    View Details » Send Enquiry »

  • breakout Active Optical Cables

    OPTiFab QSFP to 4x SFP+ breakout Active Optical Cable offers IT professionals a cost-effective interconnect solution for merging 40G QSFP and 10G SFP+ enabled host adapters, switches and servers. For typical applications, users can install this splitter active optical cable between an available ...

    View Details » Send Enquiry »

  • Breakout Cabl

    Up to 48x 2.1mm simplex cables Central element (GRP) Choice of fibre type Individual high strength aramid yarn strength members 100% dielectric LSZH Outer Jackets (both outer and sub-cables) Compact and lightweight Choice of outer jacket material and colour OS2, OM1, ...

    View Details » Send Enquiry »

  • Breakout Wall Boxes

    This terminal box ends up to 12 filaments. It is a flawless financially savvy arrangement supplier in the FTTH systems. It highlights a strong development, with connector ports situated on the outside edge for simple access.

    View Details » Send Enquiry »

  • Cable

    Central filler Loose tube (jelly filled) Inner jacket High strength aramid-yarn strength member Ripcord Outer jacket Excellent mechanical resistance Totally dielectric Tough Resistant High density of fibres OS2, OM1, OM2, OM3 and OM4 Self-supported ...

    View Details » Send Enquiry »

  • Cable Glands

    Cable glands to accept most fibre cables up to 24 core. Twisting bunny clips featuring a self adhesive pad for fibre organization

    View Details » Send Enquiry »

  • Cage Nuts

    Cable glands to accept most fibre cables up to 24 core. Twisting bunny clips featuring a self adhesive pad for fibre organization

    View Details » Send Enquiry »

  • CAT6 UTP Module

    OPTiFab CAT6 UTP low profile modules are the standard Euromod size. Each covered module is supplied with a slide mark field with space over, this is considered the utilization of self cement or further naming if required. End can be made utilizing LSA perfect tooling. The position of safety ...

    View Details » Send Enquiry »

  • CAT6 UTP modules

    OPTiFab CAT6 UTP modules are 25mm x 50mm standard Euromod size. Each covered module is supplied with a slide mark field. End can be made utilizing LSA perfect tooling, a link tie base is situated between the IDC pieces to ease link stress. The introduction of the link end makes the module ...

    View Details » Send Enquiry »

  • CAT6A Category FTP Patch Cords

    OPTiFab CAT6A unshielded tried pair (UTP) patch strings comply with class EA measures. Out patch lines are made to the most noteworthy benchmarks utilizing just quality stranded link, giving them the best in adaptability, in addition to top evaluation 50u gold plated RJ45 connector plugs for top ...

    View Details » Send Enquiry »

  • CAT6A STP Keystone Jack

    OPTiFab CAT6A screened turn pair (STP) cornerstone jack is a toeless end RJ45 attachment reasonable for mounting in a scope of lodgings from patch boards, faceplates and shades to sub floor boxes and work are dissemination nooks. The attachment itself is housed in an astounding zinc bite the dust ...

    View Details » Send Enquiry »

  • CAT6A UTP Keystone Jack

    OPTiFab CAT6A unshielded turn pair (UTP) cornerstone jacks fit in with class EA execution. They take after industry standard cornerstone jack impression and the little outline makes them perfect for high thickness applications. Every cornerstone jack is accessible with a wiring graph and ...

    View Details » Send Enquiry »

  • Cleaning Foam-Buds

    OPTiFab 2.5mm foam swabs are made from 100 pores per inch medical grade polyurethane foam which has an open cell structure, providing excellent efficiency for picking up particle matter. The foam is thermally bonded to the swab handle without using adhesives. These swabs are economical and ideal ...

    View Details » Send Enquiry »

  • Cleaning Sticks

    1.25mm fibre optic cleaning swabs are easy to use and efficient, Delivering a consistently high level of cleaning performance. Perfect for cleaning LC and MU ferrule end-faces and various adapters.

    View Details » Send Enquiry »

  • Compact Fibre Closure

    This product compliments the standard range of optical closures, but with a more compact design. Ideally suited for wall mounting, yet retaining its remains resistant to acid and alkaline, common to the larger closures. Its airtight and waterproof construction, makes the unit ideal for applications ...

    View Details » Send Enquiry »

  • Connector Cleaner Cassette

    Fibre optic connector cleaners utilise a specially formulated dry cloth for thorough and efficient cleaning of fibre optic end-faces. They eliminate the need for hazardous cleaning fluids that can leave a residue. The cloth is extremely effective in removing grease, dust and other contaminants.

    View Details » Send Enquiry »

  • Connector Cleaning Card

    Designed to replace hazardous solvents, this product easily and effectively removes interstitial and loose tube (thixotropic) filling & flooding compounds without damage to cable or fibre optic components (inks & delicate coating materials). This product has no skin or inhalation risk.

    View Details » Send Enquiry »

  • Connector-Adapter Dome closure

    A traditional dome enclosure featuring a unique internal structure, designed for an adapter-connector solution as an alternative to the fusion splicing system. This unique closure features a strong and secure metal internal plate with a fibre management system in the rear.

    View Details » Send Enquiry »

  • Copper

    OPTiFab CAT6 patch boards are produced and tried to execution benchmarks characterized by the TIA, ISO and EN principles bodies. A scope of execution qualities are tried up to 250 MHz including return misfortune, weakening and close and far end crosstalk (NEXT and FEXT) for which both more awful ...

    View Details » Send Enquiry »

  • DIN-Rail Media Converter

    DIN-Rail Media Converters offer a clip, which enables easy and safe attachment and removal from a DIN-rail. This gives the power to multiple media converters to effectivelytransfer data in network environments. The multimedia converter is available with fibre optic adapters and SFP transceiver ...

    View Details » Send Enquiry »

  • Direct Attach Passive Copper Cable

    The QSFP+ passive cable assemblies are high performance, cost effective IO solutions for 40G LAN, HPC and SAN applications. The QSFP+ passive copper cables are compliant with SFF-8436, QSFP+ MSA and IEEE P802.3ba 40GBASE-CR4. They offer a low power consumption for short reach interconnect ...

    View Details » Send Enquiry »

  • Dome Closure

    Our dome enclosure is convenient to install and requires no specialist tooling. It is suitable for aerial, underground, wall-mounting, man hole mounting and duct-mounting applications. Made from injection moulded, high-strength engineering PC plastic, it is resistant to damage caused by extreme ...

    View Details » Send Enquiry »

  • Duplex Cable

    LSZH durable outer jacket Choice of fibre type 100% Dielectric High strength aramid-yarn strength member Easy to strip with appropriate OPTiFab tools Duplex easy and safe to separate OS2, OM1, OM2, OM3 and OM4 2mm and 3mm

    View Details » Send Enquiry »

  • earthing electrode

    The process of connecting metallic bodies of all the electrical apparatus and equipments to huge mass of earth by a conductor having negligible resistance is known as Earthing.

    View Details » Send Enquiry »

  • Economy Cleaning Card

    High cleaning capability Dry cleaning Disposable and recyclable Great economic alternative to the connector cleaning card

    View Details » Send Enquiry »

  • Epoxy Syringe

    Hand held 3cc syringe and needle sets, used to load connectors with epoxy prior to terminationBlunt tip needle for safety reasons 1 inch 20 gauge Needle lid provided

    View Details » Send Enquiry »

  • fibre cleaver

    An ultra compact and outstanding quality fibre cleaver, this is designed for excellent portability and is ideal for use in the field with the OPTiFab Field Installable Connectors (FIC) or in FTTH applications. Available in various versions, including ones with an auto-return feature, a ...

    View Details » Send Enquiry »

  • Fibre Collector

    An ultra compact and outstanding quality fibre cleaver, this is designed for excellent portability and is ideal for use in the field with the OPTiFab Field Installable Connectors (FIC) or in FTTH applications. Available in various versions, including ones with an auto-return feature, narrow lid ...

    View Details » Send Enquiry »

  • Fibre Management Bar

    Keeping cables tidy and organised is paramount in a network environment. The 1U cable management bar is designed to be installed in an existing frame or cabinet, using our cage-nuts, and is available in a variety of colours, powder coating, or natural brushed aluminium finish. Brush strip version ...

    View Details » Send Enquiry »

  • Fibre Splice Protectors

    Our fibre optic fusion splice protector sleeves are designed to restore the mechanical strength, environmental integrity and fibre optic transmission properties after fibre splicing and are available for both single and ribbon (mass) fibre cables.

    View Details » Send Enquiry »

  • Field Installable Connector

    An LC Field Installable Connector (FIC) is a pre-polished and pre-assembled connector that holds a fibre in place and can be installed within 2 minutes. The LC type is a small design with great details and high technology. All the parts are made from Ultem material to withstand high temperature and ...

    View Details » Send Enquiry »

  • Field Installable Connector

    An ST type FIC is a widely used fibre optic connector in FTTx that does not need epoxy or polishing. The pre-assembled and factory terminated connectors can be installed within 2 minutes using simple tools and can be recycled several times. The ST type is a small design with great details and high ...

    View Details » Send Enquiry »

  • Filter Wavelength Division Multiplexer

    In fibre-optic communications, wavelength-division multiplexing (WDM) is a technology which multiplexes a number of optical carrier signals onto a single optical fibre by using different wavelengths (i.e. colours) of laser light. This technique enables bidirectional communications over one strand ...

    View Details » Send Enquiry »

  • Fixed Attenuators

    OPTiFab Fixed Attenuators are developed with the intention of reducing optical power levels in a network to align itself to the receiver’s requirements. Our range of high performance attenuators gives accurate attenuation over a wide range of wavelengths. Our attenuators has to offer a plug type ...

    View Details » Send Enquiry »

  • Flat Duplex Cable

    Durable inner and outer jackets LSZH durable outer jacket Choice of fibre type Choice of outer diameter High strength aramid-yarn strength member Easy to strip with appropriate OPTiFab tools Rip-cord for outer jacket separation Choice of outer jacket material and ...

    View Details » Send Enquiry »

  • Flex Scan

    With SmartAuto™ OTDR data acquisition, robust event analysis and LinkMap™ display, AFL's FlexScan OTDRs enable even novice technicians to quickly

    View Details » Send Enquiry »

  • Fujikura 12S Fusion Splicer

    The Fujikura 12S fusion splicer is the smallest, lightest, and most portable splicer in the world. The robust chassis features shock, dust and moisture protection while the two camera observation system provides for accurate fibre alignment and loss estimation calculations

    View Details » Send Enquiry »

  • Fujikura 21S Fusion Splicer

    The 21S is the World’s Smallest & Lightest Active V-groove Splicer designed for high-end FTTH splicer applications in FTTX, Data Centre LAN and Access Networks. it offers an active V-Groove alignment single fibre splicer for reliable and improved splicing performance for a range of different ...

    View Details » Send Enquiry »

  • Fujikura 70S Fusion Splicer

    The 70S rugged construction design adds improved reliability by resisting shock, rain and dust, allowing it to withstand a 30 inch drop test. Two of the newest features include an automated wind protector and a tube heater which has been developed for quicker splicing cycles and to reduce the ...

    View Details » Send Enquiry »

  • Fujikura One-Click Cleaner

    The One-Click™ connector cleaning tools cleans adapter mounted FC, LC, MU, SC and ST connectors with a simple single-action cleaning function (pushrelease). Effective with a variety of contaminants and with over 500 cleaning cycles per unit, it also has a remarkably low cost per clean. An adapter ...

    View Details » Send Enquiry »

  • GBIC SFP Transceivers

    The IFS family of Small Form-factor Pluggable (SFP) Transceiver Modules are designed for high performance, it transmits duplex data over single mode or multi-mode optical fiber. They are compatible with the industry’s SFP Multisource Agreement (MSA) standard and enables the SFP ports on any ...

    View Details » Send Enquiry »

  • Harsh Environment Adapter

    The harsh environment OPTi Plug and receptacle assemblies are available in 2 or 4 fibre configurations. Based on the N Type RF connector style, this optical connector system provides superior optical performance using LC style 1.25mm ceramic ferrules. The sealed metal housing provides external ...

    View Details » Send Enquiry »

  • Horizontal Latch-Lock Closure

    The latch-lock in-line closure is a sealed fibre optic splice closure designed for cable joint applications in telecommunications outside plant networks. The closure is suitable for deployment in aerial, underground or direct burial environments. Suitable for housing up to 144 splices, the closure ...

    View Details » Send Enquiry »

  • Horizontal Splice Closure

    The OPTiFab horizontal in-line closure is designed for straight through linebranching applications, ensuring protection from the environment, and suitable for underground deployment. This is our largest inline closure and can accept up to 288 cores.

    View Details » Send Enquiry »

  • Hybrid Adapters

    Hybrid adapters provide a solution for applications where two different connector types are used. Available with a variety of connector type options; choice of housing material, simplex or duplex configurations; and single mode & multi mode fibre types

    View Details » Send Enquiry »

  • IFS Gigabit Ethernet

    The IFS Gigabit Ethernet to SFP Media Converter can attend to the most demanding extended IP network applications that in turns offers the flexibility of SFP technology for Gigabit Ethernet transmission over optical fibre. The IFS MCR300-1T1S converts 101001000Base-T Ethernet on copper to ...

    View Details » Send Enquiry »

  • Inline Variable Optical

    The OPTiFab in-line variable optical attenuator (VOA) stabilizes the signal strengths in fibercircuits, or balances an optical signal during evaluation of the dynamic range of the measurement system.

    View Details » Send Enquiry »

  • IP65 12 Fibre Plastic Wall Box

    This terminal box ends up to 12 filaments. It is an immaculate practical arrangement supplier in the FTTx systems. Dimensions (including lid)

    View Details » Send Enquiry »

  • IP65 12-Way Small Lockable Wall Box

    This lockable IP65 conveyance box offers the capacity to end 12 filaments housed in an ABS, IP65 appraised shell. Reasonable for both 6x SC duplex and LC quad connector sorts. Can be utilized inside and remotely. Presents to 12 exit focuses for fixing links and 1 standard link passage point for ...

    View Details » Send Enquiry »

  • IP65 24 Fibre Plastic Wall Box

    This terminal box ends up to 24 strands. It is a flawless financially savvy arrangement supplier in the FTTx systems. Dimensions (including lid)

    View Details » Send Enquiry »

  • IP65 Compact FTTH wall box

    The FTTH compact IP65 closure is used for the distribution and termination of fibre optic cable devices. The IP rated box can be utilised for FTTH applications and other installation requirements to break-out and splice input cables into drop cables, pigtails, or direct patching. The box may also ...

    View Details » Send Enquiry »

  • IP65 Extra-Large Lockable Wall Box

    The 48 center IP65 fiber optic circulation box is utilized for the conveyance and end of fiber optic link gadgets. The IP evaluated box can be used for FTTH applications and other establishment necessities to break-out and join input links into drop links, ponytails, or direct fixing. The container ...

    View Details » Send Enquiry »

  • IP65 PLC Cassette Box

    The 48 center IP65 fiber optic circulation box is utilized for the dispersion and end of fiber optic link gadgets. The IP appraised box can be used for FTTH applications and other establishment necessities to break-out and graft input links into drop links, ponytails, or direct fixing. The case may ...

    View Details » Send Enquiry »

  • IP65 Snap-Lock Wall Box

    This Snap-Lock IP65 distribution box offers the ability to terminate 16 fibres housed in an ABS, IP65 rated box. Suitable for both SC duplex and LC quad adapter types. Can be used internally and externally. It offers up to 24 exit points for patching cables and 1 standard cable entry point for ...

    View Details » Send Enquiry »

  • IP65 Splitter Terminal Wall Box

    This lockable IP65 appropriation box offers the capacity to end 36 filaments housed in an ABS, IP65 appraised shell. Appropriate for both SC simplex and LC duplex connector sorts. Can be utilized inside and remotely. Presents to 48 exit focuses for fixing links and 1 standard link section point ...

    View Details » Send Enquiry »

  • IP68 Harsh Environment Patch Cord

    These assemblies are designed for waterproof applications using standard duplex LC connectors which are widely used in FTTA, FTTH and other harsh environment applications.

    View Details » Send Enquiry »

  • IPA Alcohol Dispenser Bottle

    The alcohol dispenser bottle is the perfect solution for having IPA cleaning alcohol to hand when cleaning fibre optic cable, connectors, adapters, attenuators and all necessary fibre equipment. It is a perfect addition to our Field Installable Connector tool kit. Its pump action feature means that ...

    View Details » Send Enquiry »

  • IPA Alcohol Dispenser Spray

    Handy spray bottle for dispensing diluted detailing products, IPA solutions, water, etc. Perfect as part of the full field kit.Finger spray pump action Complete and accurate warning label

    View Details » Send Enquiry »

  • Keystone Adapters

    OPTiFab fibre keystone modules support optical applications in bringing fibre to the desktop for both multi mode and single mode fibre installations. They are designed to snap directly into standard keystone faceplates, inserts, surface mount boxes, and blank patch panels.

    View Details » Send Enquiry »

  • Keystone Jack Outlets

    As an other option to the one piece covered module range, we offer the OPTiFab Keystone Jack. Appropriate for mounting in a scope of faceplates, shades and a 1U 24 port edge. These jacks are brisk and simple to introduce. Each OPTiFab cornerstone jack is produced and tried to the ANSITIAEIA ...

    View Details » Send Enquiry »

  • Keystone Jack Tool

    The OPTiFab CAT6 unscreened cornerstone jack is an autonomously checked toeless end RJ45 attachment reasonable for mounting a scope of lodging from patch boards, faceplates and shades to sub floor boxes and work range dissemination walled in areas.

    View Details » Send Enquiry »

  • Lapping Discs

    Lapping (polishing) discs are used to polish fibre optic connectors after the fibre has been epoxied into the ceramic ferrule. To use, move the connector tip over the polishing film, thereby removing excess material and polishing the fibre end. Different grades of polishing film are used in ...

    View Details » Send Enquiry »

  • Large Cable Sheath Slitting Tool

    This is the ideal instrument for cutting coats from an assortment of fiber optic link. It includes a V-opening system to get to the movable sharp edge and a fixing screw for secure use.

    View Details » Send Enquiry »

  • LC Adapter

    The OPTiLite LC (Lucent Connector) is a small form-factor connector, characterised by its small size, 1.25mm ferrule and insertion clip. Its 1.25mm ferrule is half the size of the ST connector and is often used in single mode applications due to its fantastic performance.

    View Details » Send Enquiry »

  • LC Duplex breakout cable

    This is a 40 Gigabit Ethernet QSFP 40GBase-SR4 to MTP®(MPO)LC (4 LC Duplex) varied length breakout cable. The Gbit QSFP MTP® to LCUPC breakout cable uses 8 core fibre (centre 4 are unused). It is made to connect to a QSFP module cable for a fan out and offers an aquaturquoise jacket colour. The ...

    View Details » Send Enquiry »

  • lint-free wipes

    Lint free wipes for the cleaning of optical fibres and connectors. Available in different quantities and sizes.Disposable and lint-free Soft, gentle, absorbent lint-free wipes for light-duty tasks Easily picks up liquid and dust without scratching fragile surfaces Economical delicate ...

    View Details » Send Enquiry »

  • Mechanical Fibre Splice

    OPTiFab’s mechanical fibre splice employs V-groove butting technology, which has been designed to optimise insertion loss for single mode and multi mode applications. Its design helps rapid assembly, with standardminimal tooling required. The mechanical splice is widely used and suitable for ...

    View Details » Send Enquiry »

  • Mechanical Sealing Dome Closure

    Our mechanical sealing dome enclosure is suitable for aerial, underground, wall-mounting, man hole mounting and duct-mounting applications. Made from injection moulded, high-strength engineering PC plastic, it is resistant to damage caused by extreme temperatures, oxygen and ultraviolet radiation. ...

    View Details » Send Enquiry »

  • Media Converter

    This is a newly launched industrial IFS Ethernet to Fibre Media Converter, specifically designed for performing stable operation, where the environment is electrically harsh and climatically demanding. Industrially created for reliable operation, the slim-type unit can perform conveniently. The ...

    View Details » Send Enquiry »

  • Medium Cable Sheath Slitting Tool

    The link sheath slitting apparatus is utilized for the longitudinal cutting of the plastic sheath of fiber optic link. You can conform the divider thickness to four pre-determined thicknesses.

    View Details » Send Enquiry »

  • Metal Adapters

    OPTiFab understands each customer may require unique specifications for their networking needs. We are happy to offer bespoke adapters in all configurations using different materials, such as metal for increased strength and durability. Call today for more information on our entire bespoke ...

    View Details » Send Enquiry »

  • Metal Double-Door Lockable Wall Box

    The OPTiFab metal twofold entryway lockable divider box includes a connector prepared inside section and join plate choice. Connectors, join plate and ponytails can be introduced upon solicitation. The façade is built from chilly moved steel with a profoundly tough electrostatic powder covering. ...

    View Details » Send Enquiry »

  • Metal Single-Door Lockable Wall Box

    The OPTiFab metal single-entryway lockable divider box includes a connector prepared inside section and graft plate choice. Connectors, graft plate and braids can be introduced upon solicitation. The façade is built from chilly moved steel with an exceptionally tough electrostatic powder covering.

    View Details » Send Enquiry »

  • mode conditioning patch cord

    OPTiFab mode conditioning patch cords are designed for long wave Gigabit Ethernet (1310nm1000 base-LX) network applications where both single mode and multi mode interconnects are required. The connection between the MM and SM fibre is slightly offset; resulting in the mode conditioning patch cord ...

    View Details » Send Enquiry »

  • MTRJ Adapter

    The OPTiLite MTRJ (Mechanical Transfer Registered Jack) is a popular small-form connector. It features two fibres mated together that align with the adapter with the help of keyway orientation and are secured with a clip. Popularised by its low cost and small size.

    View Details » Send Enquiry »

  • MU Adapter

    The OPTiLite MU is a small form factor SC. It has the same pushpull style, but can fit 2 channels in the same Footprint of a single SC. The MU Connector looks a miniature SC with a 1.25mm ferrule.

    View Details » Send Enquiry »

  • Multi Loose-Tube Cable

    250μm colour-coded optical fibre Gel filled loose-tubes for fibre lubrication and water repelling properties Central element (GRP) Ripcord Durable outer jacket Choice of fibre type Choice of colour coded fibres 100% dielectric Excellent friction resistance Water ...

    View Details » Send Enquiry »

  • Multi Mode Pigtails

    Multi mode optical fibre is suitable for communication over short distances; such as in an office building or school. Multi mode fibre equipment is cheaper than single mode, and due to its high capacity and reliability, multi mode fibre is ideal for backbone applications. Pigtails available in ...

    View Details » Send Enquiry »

  • Multimode Patch Cords

    Multimode optical fibre is suitable for communcation over short distances; such as in an office building or school. Multimode fibre equipment is cheaper than singlemode, and due to its high capacity and reliability, multimode fibre is ideal for backbone applications. With many years of acquired ...

    View Details » Send Enquiry »

  • Optical Distribution Frame

    The 2U-4U closed frame optical distribution frame is a modulated design with drawable trays inside and constructed from cold-rolled steel. It is available unloaded or pre-installed with your choice of fibre optic adapters and pigtails. It is ideal for indoor fibre optic cables connection, storage, ...

    View Details » Send Enquiry »

  • OPTiFab Fusion Splicer

    This is a rugged and reliable fusion splicer with a 5 inch LCD display, and has an average splice time of 9 seconds.

    View Details » Send Enquiry »

  • OPTiFab rack-mounted sliding patch panels

    OPTiFab rack-mounted fixed and sliding patch panels are available unloaded or pre-loaded with your choice of adapters – multi mode or single mode – U height and finish (black RAL 9005 or stainless steel). The panels feature 4x 20mm cable entryexit holes, and 2x 10mm blown fibre holes. There ...

    View Details » Send Enquiry »

  • OPTiLite E2000 connector

    The OPTiLite E2000 connector and adapter is designed as a premium solution with superior performance characteristics. The unique latch design will open automatically when pushed into the adapter, and the clip ensures the connector remains in position

    View Details » Send Enquiry »

  • Palm-Held Cable Sheath Slitting Tool

    This little palm-held sheath slitting apparatuses openings the link on both the top and base of the sheath, taking into account simple evacuation of the external sheath. Appropriate for applications requiring the slitting of tight cushioned link.

    View Details » Send Enquiry »

  • Polishing Mat Polishing Plate

    The solid silicone polishing mat is used for polishing PC-style pre-radiused connectors. The glass plate provides a hard, flat surface for polishing connectors and is produced from safety glass with all edges and corners rounded. Rubber feet help to ensure the plate will not mar the work surface ...

    View Details » Send Enquiry »

  • Polishing Pucks

    Used in combination with the OPTiFab polishing mat and lapping film, the polishing pucks are used to hold the connector tip in place and at the correct distance and angle while polishing.

    View Details » Send Enquiry »

  • Port Copper Ports

    This IFS Layer 2 managed gigabit switch has been created to handle extremely large amounts of data. These units function in a secure and systematic classification. They connect to an enterprise backbone or high capacity network server, which help them to perform intelligently. The powerful features ...

    View Details » Send Enquiry »

  • Pre-saturated Cymene Wipes

    Lapping (polishing) discs are used to polish fibre optic connectors after the fibre has been epoxied into the ceramic ferrule. To use, move the connector tip over the polishing film, thereby removing excess material and polishing the fibre end. Different grades of polishing film are used in ...

    View Details » Send Enquiry »

  • Pre-Saturated IPA Wipes

    Pre-saturated wipes for general cleaning applications. These wipes are a tough non woven engineering wipe impregnated with quick evaporating IPA (Isopropyl Alcohol) for the removal of grease, grime and marking inks from all surfaces. Suitable for connector tip cleaning.

    View Details » Send Enquiry »

  • Pre-Terminated Fibre

    OPTiFab’s pre-terminated fibre solutions allow our customers to order complete assemblies ready for direct installation, cutting on-site time and labour costs. Supplied on a drum with protective packaging to ensure that the fibre and all the components of the pre-term arrive in perfect condition. ...

    View Details » Send Enquiry »

  • QSFP Active Optic Cable

    QSFP active optic cables are a high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fibre channel and PCIe. It is compliant with the QSFP MSA and IEEE P802.3ba 40GBASE-SR4. QSFP AOC is an assembly of 4 full-duplex lanes, where each lane is capable of ...

    View Details » Send Enquiry »

  • Quadplex Patch Cord

    OPTiFabQuadplex™ patch cords are the perfect solution for quad-core applications. Available in both single-mode and multi mode fibre types, the OPTiFabQuadplex™ Patch cord is made to the same high standards and specifications as our simplex and duplex patch cords.

    View Details » Send Enquiry »

  • Ratchet Crimp Tool

    The OPTiFab Ratchet Crimp Tool is an expert, overwhelming obligation tightening pleat apparatus with movable pressure with the end goal of securing the crease ring in a connector. Including replaceable kick the bucket sets to meet necessities of various creasing sizes.

    View Details » Send Enquiry »

  • Right Angle Patch Panel

    Class 6 Patch Panels follow the present standard for CAT6. Simplicity of establishment is guaranteed with implicit back link administration at a 90 degree edge to the board facia. The 48 port patch board highlights a removable 'upper deck' course of action to guarantee simplicity of end of the ...

    View Details » Send Enquiry »

  • Safe Lock SC Adapters

    OPTiFab Safe Lock SC simplex and duplex adapters are an innovative solution for advanced data centre and FTTX applications. The unique adapter lock mechanism is designed for preventing accidental fibre disconnection of important channel links. The renewed SC adapter housing is moulded into one ...

    View Details » Send Enquiry »

  • SC Adapter

    The OPTiLite SC (Subscriber Connector) is a low cost and durable snap-in, push-pull style connector, commonly utilised in newer network applications. It is characterised by its square housing, 2.5mm ferrule and features a keyway for correct insertion purposes.

    View Details » Send Enquiry »

  • SC Simplex or Duplex

    Active Networking is aversatile, adaptive and efficient Ethernet converter device. It performs data transmission between twisted pair electrical signals and optical signals, which are the two types of network connection media. Active Networking can increase the transmission distance to 0.55 ...

    View Details » Send Enquiry »

  • Sfp Transceiver

    The OPTiFab SFP Module features the latest 100Base-BX WDM bi-directional standards that transmit over a single strand of fiber, with one different wavelength going in each direction. With this LC SFP Module you can extend the network distance up to 15km when it is accompanied by an OPTiFab Switch ...

    View Details » Send Enquiry »

  • sharps bins

    Glass fibre, by nature, is hazardous and can cause harm to the human body, especially if broken or in short-length shards. Therefore, correct disposal of damaged or cleaved fibre is essential for safety reasons. A sharps bin allows for a safe, enclosed disposal and is an essential part of any ...

    View Details » Send Enquiry »

  • Shuttered Adapters

    OPTiFab’s shuttered adapter range provides a combination of safety in FTTH applications and other applications such as telecommunication networks. The shuttered design ensures the adapter remains dust resistant, increasing reliability and performance. The slip-on retractable cover acts as ...

    View Details » Send Enquiry »

  • Single Loose-Tube Cable

    250μm colour-coded optical fibre Gel filled loose-tubes for fibre lubrication and water repelling properties Ripcord Durable outer jacket Choice of fibre type Choice of colour coded fibres 100% dielectric Water blocking fibreglass reinforcements Choice of outer ...

    View Details » Send Enquiry »

  • Single Mode Patch Cords

    Singlemode optical fibre is characterised by its narrow modal dispersion (8.3 to 10 micron diameter); better retaining fidelity of light pulses and exhibiting higher bandwidth than multimode. As a result, singlemodefibre is ideal for long distance applications.

    View Details » Send Enquiry »

  • Slim-Line Fibre Closure IP68

    The slim-line closure is compatible with most cable constructions, and allows easy and convenient re-entry and re-closure. It’s well constructed and easy to install. It features a splice tray with optical fibre radius of ≥40mm and results in very low optical loss. The outer metal component ...

    View Details » Send Enquiry »

  • Solid Bare Copper 4-Pair LAN Cable

    OPTiFab CAT6A unshielded tried pair (UTP) links are fabricated and tried to the TIAEIA 568-B2.1-1, EN50173-1 and ISOIEC 11801 Category 6 particulars. Every link comprises of 8 shading coded 23AWG polyethylene protected conductors. These are curved together to frame 4 sets with fluctuating ...

    View Details » Send Enquiry »

  • ST Adapter

    The OPTiLite ST (Straight Tip) is a quick release, bayonet style connector. Its cylindrical design features a keyed ferrule for correct insertion purposes, and a metal spring to ensure a secure fit into the keyed ST screw-in adapter. A twist bayonet ensures a secure connection.

    View Details » Send Enquiry »

  • Steel Tape Armour Cable Cutting Tool

    This basic yet hearty configuration takes into consideration stripping of link sheaths with a pivoting cutting edge (worked by moving the modification lever) and pulling the link through the link guide. Reasonable for applications requiring the slitting of free tube and tight cradled link.

    View Details » Send Enquiry »

  • Steel Tape Armour Patch Cord

    Armoured patch cords are used in areas or applications where additional safeguards are required to ensure added cable protection. The stainless steel armour construction is designed to provide strength, but remains flexible enough for interconnection and routing. With many years of acquired ...

    View Details » Send Enquiry »

  • Tamper-Proof Wall Boxes

    This terminal box ends up to 12 strands. It is an immaculate financially savvy arrangement supplier in the FTTH systems. The connector and connector meet within the divider box, guaranteeing complete security. Highlights 4 or 8 link passage spaces, and 1x 20mm link section organ opening.

    View Details » Send Enquiry »

  • Tight Buffered Distribution Cable

    Durable inner and outer jackets LSZH durable outer jacket Choice of fibre type Choice of outer diameter High strength aramid-yarn strength member Easy to strip with appropriate OPTiFab tools Colour coded internal fibre jackets Choice of outer jacket material and ...

    View Details » Send Enquiry »

  • Unscreened PVC Patch Cords

    OPTiFab CAT6 UTP patch leads are produced and tried to ISO and EN necessities for patch rope gatherings. Utilizing these patch ropes will guarantee the introduced cabling framework is agreeable with the TIAEIA, ISO and EN channel determination prerequisites, and will give ideal execution ...

    View Details » Send Enquiry »

  • Unscreened Twister Pair Copper

    OPTiFab CAT6 unscreened bent pair patch boards are accessible in 24 and 48 port adaptations to oblige establishment prerequisites. Every board has a screen printed naming field situated over every port, included with the board is a preprinted self-cement marking sheet — pre numbered 1-96, for ...

    View Details » Send Enquiry »

  • wall box

    This Snap-Lock IP65 distribution box offers the ability to terminate 16 fibres housed in an ABS, IP65 rated box. Suitable for both SC duplex and LC quad adapter types.

    View Details » Send Enquiry »

  • WDM Solutions

    OPTiFab's WDM, coupler and splitter items are offered in an assortment of arrangements. Whether you require crossover connectors, custom length legs, non-standard split proportions or unordinary wavelength mixes, our items are intended to address your issues.

    View Details » Send Enquiry »

  • XL Compressed Air

    Ideal for use on fibre optic surfaces without the need for solvents or abrasives. Will not leave any residue.Provides potent dust-removing power for practically any task 100% ozone safe Contains bitterant to dissuade solvent abuse 300ml per can

    View Details » Send Enquiry »

[+] View All Products

Search


Contact Details

Amit Das

Office No. 1303, Al Mussalla Tower, Bur Dubai. Dubai, Dubai, Dubai, , United Arab Emirates

View Mobile No.