Post Buy Requirement
WL
Dubai, United Arab Emirates
Add Review

Other Products / Services

Mirage LED Tunable White


Optics


  • Light Output Options

    • Tunable Elite: 1800 lumens (28W)*



  • Supplied complete with matte reflector

  • Tunable white LED light engine that ranges from 2700K to 6500K

  • IP44 as standard

  • Available with a wide range of attachments

  • *Output and wattage based on 6500K colour temperature. These figures will vary between 1-5% depending on colour temperature used


Body


  • Black cast aluminium body with polycarbonate reflector ring in white

  • Rapid installation guaranteed with our unique spring assembly

  • LED driver included

  • For ceilings 5-50mm thick


View Complete Details

Esprit LED

Optics


  • Output Options:

    • 1000 lumens (13W)

    • 2000 lumens (24W)

    • 3000 lumens (29W)



  • Supplied complete with anodised specular reflector

  • Two colour temperature options;

    • Cool white 4000K

    • Warm white 3000K



  • Optional integral emergency options in 3hr or COMEPS (COMEPS can be wired as Easytest if required)


Body


  • IP44 as standard

  • IP54 options available with disc attachment

  • TP(a) options available with disc attachment

  • Supplied complete with driver in fixed output or DALI

  • Black cast aluminium heatsink with white polycarbonate body and bezel

  • Optional attachments available for visual differentiation or wipe-clean surface (supplied separately);

    • IP54 clear or opal flat polycarbonate disc

    • TP(a) clear or opal flat polycarbonate disc

    • Architectural floating ring with clear sides and an opal underside

    • Anti-glare control insert for reduction of glare



  • Rapid spring assembly installation

  • For ceiling thicknesses of 1mm - 30mm

  • RAL Colour: RAL9003

View Complete Details

Mirage LED

Mirage LED combines advanced optical design with the latest LED developments, and has been designed to meet a number of different requirements with a range of light outputs and colour temperatures.


Optics


  • Light Output Options - Comfort and Compact

    • 1100 lumens (10W*)

    • 2000 lumens (18W*)

    • 3000 lumens (25W*)




* Total power consumption including driver based on the 4000K light engine



  • Three reflector finish options available:

    • Specular

    • Matt*

    • White*



  • Available in 3000K and 4000K

  • IP44 as standard


* only available in the Comfort body



Body


  • Black cast aluminium body with polycarbonate reflector ring in white

  • Bodies available in two depths, Compact or Comfort

  • Rapid installation guaranteed with our unique spring assembly

  • Luminaire supplied with interconnecting cable for connection to the LED driver

  • LED driver to be ordered separately with Compact and Comfort

  • For ceilings 5-50mm thick

  • RAL Colour: RAL9003

  • Available with a wide range of attachments

View Complete Details

Concert SL Circular

Optics


  • Light Output Options:

    • 500 - 600 lumens (8W)

    • 770 - 980 lumens (14W)



  • Choice of 3000K or 4000K colour temperature

  • Moulded polycarbonate reflector with medium beam distribution

  • Low glare black internal baffle with soft white option

  • Downlight or wallwash options


Body


  • Die-cast white aluminium bezel

  • Fixed output or Dali driver included

  • Optional plaster-in version for seamless set-back aesthetic (to be installed prior to luminaire)

  • Integral IP44 protective lens as standard

  • White RAL Colour: RAL9003

  • Class 2 double insulated wiring

  • Ambient operating temperature between 25C to +25C

View Complete Details

LDR LED Micro Tilt

Optics


  • Lamp Options:


    • LED 3 x 1W



  • Body


    • Die cast aluminium body

    • Bezel finished white or chrome

    • Driver supplied separately

    • For ceiling thickness:

      • 3mm to 17mm





View Complete Details

Mirage LED Anti Ligature

Balancing the requirementto aid wellbeing and delivera safe environment.Mirage LED Anti-ligature offers a range of light outputs and colour temperatures and meets the stringent testing requirements ofthe Environmental Design Guide for Adult Medium Secure Services.



Optics


  • Light Output Options - Comfort and Compact

    • 1000 lumens (10W*)

    • 2000 lumens (18W*)

    • 3000 lumens (26W*)




*Total power consumption including driver based on the 4000K light engine



  • Emergency Outputs (expressed as BLF)

    • 1000 lumens (20% BLF)

    • 2000 lumens (10.5% BLF)

    • 3000 lumens (7.3% BLF)





  • Meets the testing requirements ofthe Environmental Design Guide for Adult Medium Secure Services: 2011

  • Supplied complete with specular reflector

  • Available in 3000K and 4000K

  • High impactpolycarbonate diffuser

  • Optional anti-glare control ring


Body


  • Front bezel and diffuser is screw fixed to the rear ceiling plate and secured by retaining tamper proof screws

  • Black cast aluminium body with polycarbonate reflector ring in white

  • Bodies available in two depths, compact or comfort

  • Rapid installation guaranteed with our unique spring assembly

  • Luminaire supplied with interconnecting cable for connection to the LED driver (LED driver to be ordered separately)

  • Suitable ceiling thickness: 9-40mm

View Complete Details

Mirage LED Surface

Anelegant circular surface mounted downlight with a cast aluminium body, specular reflector and integral driver.


Optics


  • Specular Reflector

  • Light Output Options *

    • 1100 lumens (10W)

    • 2000 lumens (18W)

    • 3000 lumens (25W)



  • Emergency Output *

    • 350 lumens



  • Choice of 3000K warm or 4000K cool white colour temperature


* Outputs are based on 4000K colour temperature


Body


  • Cast aluminium body in two different heights

    • 200 mm **

    • 270 mm



  • Choice of body colours

    • White (RAL 9003)

    • Silver (RAL 9006)

    • Black (RAL 9005)



  • Overall diameter 178mm

  • Integral Fixed Output or DALI driver

  • 3hr Emergency or COMEPS emergency options (COMEPS can be Easytest if required)

  • Quick and easy installation, simply secure the holding bracket and slide the gear tray and outer body into place

  • Holding bracket allows for Screw orBESA mounting

  • Optional anti-glare control ring to reduce glare (accessory supplied separately)

  • IP20


** Not available with emergency, for emergencyoption use270mm body

View Complete Details

Centurion PP65 LED

Optics


  • Light Output Options:

    • 1338 lumens, 17W

    • 2835 lumens, 36W



  • Emergency Output (BLF):


    • All variants- 110 Lumens (Florin Head)



  • Body


    • IP65

    • DALI as standard

    • 4000K

    • Black polycarbonate visor and die-cast aluminium base

    • Clear UV stabilised prismatic polycarbonate diffuser with Miro 5 reflector mounted internally

    • Two 20mm diameter knock-out options for cable entry gland at either side of the base

    • Ambient operating temperature ranges:

      • Non Emergency, -30C to +25C

      • Emergency, -5C to + 25C



    • Integral emergency options in standard 3 hour, Easytest and COMEPS



View Complete Details

Twin Spot LED

Optics


  • 2 x 6W LED heads delivering 380 lumens each

  • Emergency Output (BLF):

    • All variants - 380 Lumens/Head



  • 5000K colour temperature

  • Adjustable twin heads with polycarbonate lenses

  • Medium beam distribution

  • Compliant with EN 60598.2.22 requirements


Body


  • IP40

  • Injection moulded polycarbonate body

  • White finish

  • RAL Colour: White RAL9010.

  • Wall mounted

  • 20mm knockout for cable entry in side of body

  • Standard 3 hour self-contained non-maintained operation

  • COMEPS addressable DALI test option

  • COMEPS version can be wired as self-test

  • Integral 3.6V, 4Ah NiCd batteries

  • Ambient operating temperature 0-25C

  • Rotation between 45-90 down and 20-90 side (see installation leaflet)

View Complete Details

Exit LED

Optics


  • Power consumption:

    • 3W maintained

    • 1.5W non maintained



  • 16 x low energy LEDs

  • 34m viewing distance

  • Product is supplied as a complete unit with opal polycarbonate legend panel already fitted

  • Up, down, left and right legend panels are available

  • Legends supplied in accordance with BS 5266-1 2011 (ISO7010)


Body


  • Wall mounted via key hole slot fixings

  • Steel body finished white

  • Two part body for ease of installation, cover hooks over the back plate and is simply retained below

  • High temperature Ni-Cd battery with constant current charger and LED charge indicator

  • 3 hour maintained (may be wired as non-maintained)

  • BESA cable entry

View Complete Details

Command Connect Modules




  • Available in both switching (4 pole) and DALI dimming (6 pole)

  • Can be extended from 4 way up to 16 way using extender modules and then scaled down again if required

  • Range of detectors for use with modules including absence, presence, PIR and microwave

  • Variety of installation options; slab mounting, drop rod mounting, channel nut mounting and BESA box mounting

  • Selection of accessories for controlling and programming

  • 16A rated system

  • Maximum 10A per output

  • Maximum rating dependent on detector

  • Switching/DALI Dimming modules provide the option of SELV switching where appropriate


NOTE: Plugs and leads are supplied separately to modules. See Command Fast Link product. Modules must be used in conjunction with Command Connect detectors. Any one system can be connected to a maximum of one detector or one connection module.





Body


  • Connecting distribution modules for straightforward, flexible and extendable controls connections

  • Lightweight, compact and sturdy with a simple 'slot' connecting mechanism


View Complete Details

Command Valor

Overview


  • Ease of commissioning with local controls for time delay and lux level adjustment

  • Detection range of up to 6m based on 2.5m mounting height

  • Recommended mounting height of 1.8m to 3m

  • Manual override operation

  • 360 coverage

  • Supplied with kit for recessing or surface mounting

  • Recessed to fit ceiling thickness of 5mm - 20mm

  • Off delay of 15 minutes from last observed movement (adjustable from 5 seconds)

  • 5 second walk test mode

  • Switches up to 6A of lighting;

    • Incandescent / Halogen max 1440W

    • Fluorescent lamp (magnetic) max 500W

    • Fluorescent lamp (electronic ballast) max 400W

    • Low energy compact fluorescnet lamp max 120W

    • LED max 110W Photocell measures daylight penetration and holds off luminaires if adequate daylight is present



  • Finished white

View Complete Details

Command Controllers And Programmers

COMHC/EVHC



  • Handheld controller designed to allow temporary local user override on, off, raise and lower light level

  • 6 presets for scene setting

  • COMHC for COMPL. detectors only

  • EVHC for Command Evo detectors only


EVHP



  • A handheld programmer that allows the user to set variable parameters on selected Whitecroft Lighting Command Evo detectors only


COMAHP



  • A handheld programmer that allows the user to set variable parameters on all Whitecroft Lighting Command COMPL and Command Evo detectors via a digital display and on-screen menu. This device can also interrogate and download settings from a detector

View Complete Details

Command Elite COMD2CR



Interface


To enable complete control of your Command Elite lighting control system, Whitecroft have developed an on-line electronic interface allowing complete control and reporting from a remotelocation. This secure system allows you to interrogate and report on individual or groups of luminaires or indeed any DALI component. Live energy monitoring enables the user to compare instant energy usage with recorded trends, ensuring the most efficient lighting set-up is maintained. Emergency testing can be scheduled and reported automatically, ensuring uninterrupted building use when using DALI emergency luminaires.





Body

To further expand the flexibility of a DALI lighting control system, a 2 channel router is available. This gives the opportunity to address up to 128 devices up to 500mA maximum from one router and is scalable to meet the needs of the largest installation as multiple routers can be networked.


128 Addresses



  • The DALI Router can address up to 64 devices or up to 250mA maximum on each of 2 channels, giving a wider range than an individual hub


Scalable



  • DALI Routers can be linked together by Ethernet cable

  • There is no limit to the number of routers used in a single installation, making the system infinitely scalable

  • Each router can be assigned an IP address and can be linked into an existing ethernet network


Building Wide Flexibility



  • Each room can be configured independently for the requirements of the space, from simple PIR functionality for storage areas to complex scene-setting for meeting areas.

  • Daylight harvesting can reduce energy consumption in open plan or cellular office environments

  • Programming can be from a single point with PC-basedsoftware configuration. This can even be achieved remotely


View Complete Details

Modular Switch Panels


  • Modular switch panels are a fully DALI compatible range of user interfaces that allow basic adjustments to the system as well as scene setting.

  • Indicator LED and an infrared receiver

  • Out of box operation

  • Designed to fit both DIN and UK standard back boxes

  • DALI power consumption 10mA

View Complete Details

Digital Bus Power Supply

Overview


  • The COMPLBC is a digital bus power supply that powers and synchronises the bus for up to 200 devices. It is equipped with a test facility which provides a simple check of the bus integrity and three volt free inputs to enable easy control of complete systems from one centralised location. Linking of the Bus Power Supply units enables a building wide common zone to be established without the need for additional hardware. Up to 99 COMPLBC Power Supply units can be connected together (per installation) increasing capacity to almost 20, 000 devices on a single system.

  • Digital bus power supply

  • Powers and synchronises the bus for up to 200 devices

  • Integrated test facility

  • Three volt free inputs

  • Operating at 230V

  • Power consumption

  • IP65

View Complete Details

Ten Button Scene Control Panel

Overview


  • The COMPLSP10 Scene Switch Panel is used to provide groups of luminaires with scene setting and recall, zone control and communication functions.

  • Ten button scene control panel

  • Fascia available in brushed stainless steel or white

  • To set up to six lighting scenes

  • Group dimming

  • Fascia must be purchased separately to panel

  • Universal handheld controller purchased separately (COMSSC)

  • Programmed with handheld programmer COMAP (supplied separately)

View Complete Details

Wireless Lighting Control

  • Wireless user scene plate ACONWS
  •    
  • 4 channel switch interface ACONSIU

Air Control offers a simple, easy commission solution bringing wireless control to areas with higher ceilings such as entrance atria, stairwells or retail and hospitality areas. Air Control can be integrated into a luminaire, allowing groups to be created and controlled from a simple wall plate or mobile app.



High performance mesh networking technology

Air Control is an advanced lighting control solution based on Bluetooth Low Energy (BLE). BLE is a state-of-the-art wireless technology and the only low power wireless technology in all modern smartphones, tablets and even smart watches, making it the only mainstream and future proof low power radio technology in the world. Air Control technology provides a mesh network where all the intelligence of the system is replicated in every node. These self-organising wireless mesh networks can control a largenumber of luminaires from any point so if any individual luminaire is removed or reconfigured, the lighting control keeps working. Air Control equipped luminaires are smart on their own and only connect when needed, an internet connection is not necessary for normal operation.



Air Control functionality

Switch and dim individual luminaires
Create groups of luminaires and switch or dim as one
Create and recall lighting scenes
Adjust colour temperature on tunable white luminaires
Assign time schedules to individual or groups of luminaires
Support remotely via a wireless Gateway on a smart device

View Complete Details

Air Control Directional

  • Directional detector ACONLRPIR
  •    
  • Essential mounting socket * ACONSOCK

  • Surface mounted long range directional occupancy and daylight sensor

  • Uses Passive Infrared technology (PIR)

  • Absence or presence detection options

  • Daylight hold-off and/or regulating for use with 'Air Control' enabled luminaires

  • Adjustable time out delay

  • Maximum detection range 25m

  • 2.2 to 3m optimum mounting height range

  • Wireless communication using Bluetooth Low Energy (BLE)

  • IP20 rated

  • Flame retardant polycarbonate

  • White RAL 9003 finish

  • Electrical Class II

  • Loop in and out terminal

  • Ambient temperature -20 to +40C

  • Requires surface mounting socket for installation

  • Can be configured via the Air Control app using Tablet or Smart Phone

  • Optional Air Control wireless scene control plate (ACONWS)

  • Optional 4 channel switch interface (ACONSIU) for user override with either:

    • Centre point biased switch (supplied by others)

    • Push to make switch (supplied by others)



View Complete Details

Air Control Highbay


  • Surface mounted occupancy and daylight sensor

  • For high mounting applications

  • Narrow spot or wide detection zones

  • Spot beam up to 20m mounting height with 5m diameter detection zone

  • Wide beam up to 14m mounting height with 28m diameter detection zone

  • Uses Passive Infrared technology (PIR)

  • Absence or presence detection options

  • Daylight hold-off and/or regulating for use with 'Air Control' enabled luminaires

  • Adjustable time out delay

  • 360 degree detection zone

  • Wireless communication using Bluetooth Low Energy (BLE)

  • IP20 rated

  • Flame retardant polycarbonate

  • White RAL 9003 finish

  • Electrical Class II

  • Loop in and out terminals

  • Ambient temperature -20 to +40C

  • Can be configured via the Air Control app using Tablet or Smart Phone

  • Optional Air Control wireless scene control plate (ACONWS)

  • Optional 4 channel switch interface (ACONSIU) for user override with either:

    • Centre point biased switch (supplied by others)

    • Push to make switch (supplied by others)



View Complete Details

Air Control Switch Input Unit



Overview

The Air Control Switch Input Unit is an interface enabling user override by simple push button switches in conjuction with Air Control detectors.





Body


  • Interface for use with wireless Air Control system

  • Can be used with Air Control detectors to enable user override

  • Bluetooth BLE 2.4 Ghz

  • Can be used in conjunction with either:

    • Centre point biased switch (supplied by others)

    • Push to make switch (supplied by others)



  • Battery powered, removing the need for mains cables to wall switches

  • 1 to 4 push buttons can be used

  • Configured by Smart phone or tablet via app

  • Can control individual or groups of luminaires or to set scenes

  • Supplied with fitted 5 core cable, 100mm long

  • Fits within a standard UK wall box

  • Uses 1 x CR2450 3V battery (supplied)

  • Ambient temperature -20 to +45C


View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Whitecroft Lighting (Whitecroft Lighting)
  • P.O.Box 126287 Dubai United Arab Emirates, United Arab Emirates
  • Share us via