ANBI General Trading L.L.C

Dubai, United Arab Emirates

Application:The Watts M115 Pressure Reducing Valve is designed to adjust, set and maintain downstream pressure of pipeline. Its generally used in city water supply, industrial and agricultural water transmission pipeline, etc.

Features:1. Stable performance, safe and reliable;2. Simple operation, convenient adjusting;3. Precise pressure reducing;4. Long service life.

Mechanical Float Valves are used in commercial, industrial, and agricultural applications for controlling high capacity water flow and can be tank wall-mounted.

Suitable for domestic water services, heating and air-conditioning plants, compressed air systems.They can be installed in any position: vertical, horizontal, oblique.

Body in brass.Plate in polymer.Washer in NBR.Spring in stainless steel.Minimum and maximum working temperatures: -20C, 100C.Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).

Crane D171 Ball Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the D171 and D171EXS are WRAS approved.

Sizes: 12 or 34 (15 or 20mm)

Series 530C Calibrated Pressure Relief Valves are spring operated brass valves designed for use only as protection from the build up of excessive pressure in systems containing water, oil or air. Series 530C valves incorporate a calibrated adjustment feature for setting the valve to the relief pressure required. These valves are ideally suited for bypass thermal expansion relief.

FeaturesCalibrated adjustment feature for setting valve to reliefpressure requiredAdjustable range 50 175psi (3.4 12.1 bar)All brass constructionAll stainless steel springBuna-N disc on machined body seatInlet (bottom), male NPT threadedOutlet (side), female NPT threaded

Pressure TemperatureMaximum Temperature: 180F (82C)

Spring Ranges12 or 34 (15 or 20mm): 50 175psi (3.4 12.1 bar)34 (20mm): 100 300psi (6.9 20.7 bar)Application Note: The Watts Series 530C are not ASME approved safety relief valves and should not be used in system application with this requirement.

Dezincification resistant brass, full bore, machined to a microsmooth finish, female thread acc. ISO 228 Minimum temperature: -10 C (short period -50 C), water 0.5 C. Maximum temperature: 130 C (short period 150 C), water 110 C.

1/2 x 1/2 angle valve with tricorn handle supplied with both hot & cold indicator.

2 Years Guarantee on the product.

Butterfly valves provide bi-directional dead-end service in commercial and industrial service. To make your selection easier, ANBI offers specification and submittal assistance. You also get the assurance of the HERZ warranty, along with superior customer service expertise.

These valves are available in Lever & Gear Type and is suitable for Semi & Fully Lugged Type.

The butterfly valve have the body,

Type BA: GG, JL 1040, accor. EN 1561Type BB: GGG, JS1030, accor. EN 1563.

The body has blue color (RAL 5017). Inside the body is a rubber liner made of EPDM in accordance with an ISO 1691, the disc is made of brass, nickel plated and the drive shaft split into 2 parts is made of Stainless Steel 1.4021 accor. to EN 10088.

The valve are available in Semi-lugged (type BA) or Fully-lugged (type BB) versions.

Application and maintenanceThe pressure reducing valve protects installations against over pressure (reduces input pressure to a working level). It can also be used in heating systems to protect boiler against increased pressure. The outlet pressure is adjustable and does not vary with changes of the inlet pressure. The outlet pressure can be adjusted by turning the green handle. Turning the handle clockwise increases the outlet pressure. Turning above the stated values on the pressure reducer scale may damage the valve. We recommend the max. outlet pressure of 4 bar for private house installations (product long life, costs, ). After each new setting of the outlet pressure, the regulated pipe has to be opened and closed. We recommend maintenance by authorized installers according to DIN 1988. Check the filter condition in the regulator several times a year and, if it is necessary, clean or replace it with a new one. Tool for maintenance is included in every box of pressure reducer.

brass FxF gate valve, BS5154BS5154 PN20non rising stemsolid brass wedgehigh quality PTFE packingBS2779 parallel thread (PT)suitable for: steam, water and oil

maximum pressure conditions:temp up to 100C 20.0Bartemp up to 180C 9.0Bar

A Pressure Independent Control Valve, or PICV as it is commonly known, is a multi-functional valve, combining the operation of 3 different valves in one convenient and compact unit. The PICV acts as a differential pressure control valve, a regulating valve and a 2-port control valve.

Use of these valves in a commercial heating or cooling system allows comfort levels to be optimised at least cost, reducing ongoing energy consumption and improving the efficiency of the system to outstanding levels.

Significant cost and installation benefits can be gained by installing PICVs.

Use of these eliminates the need for conventional commissioning or balancing / regulating valves as well as 2-port control valves, differential pressure control and their respective partner valves, as seen in conventional HVAC systems.

Compact design, dezincification resistant brass body, external thread connection and with cone, Combined flow rate controller and control valve, pressure independent. Actuator mounting threaded connection M 28 x 1.5 with operating range 4.0 mm. Compression adapters and press connections have to be ordered separately. The actuating drive is not included.

HERZ-Mixing valve with two-port flow direction25 l/min, 3 bar of water pressure, with water quantity min. 4 l/min, factory setting of mixing temperature 3848 C 2K mixing precision.

Features and benefitsOptimised thermostat technology for best control quality and longer durabilityExcellent temperature stability with a fast reacting thermostat to reduce the risk of uncontrolled high water temperatureDesigned for high flow-rates and for a stable outlet temperatureBuild-in with check valves in hot and cold water supplyBody and parts in contact with water are made of dezincification resistant brass

MaterialBody: DZR brass CC752SSpring: Stainless steel 1.4310Internal parts: DZR brass CW626NStem: DZR brass CW626NHandweel: ABSSealing: EPDM

Body in brass.O-ring for upper plug in NBR.O-ring of the side plug in NBR.Plate in brass.Minimum and maximum working temperatures: 0C, 90C.Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228

Lead Free* Cartridge Style Water Pressure Reducing Valves

Lead Free* Models Available

1/2 to 2 in. (15 to 50mm)

Series LFX65B Lead Free* Water Pressure Reducing Valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption.

The LFX65B is a cartridge style regulator and is orderable three ways: As a complete, ready-to-install regulator, or as a separate rough-in kit consisting of a Lead Free* cast copper silicon alloy body with integral strainer, or as a separate cartridge assembly.

AB-QM is a Pressure Independent Balancing and Control Valve, which limits the maximum flow, and at the same time function as a control valve operated by a several different types of Danfoss actuators. AB-QM can be set to a precise design value and thereby provide full control over the real conditions in the system.

Body made of forged brass according to DIN 17660, PTFE seals. Temperatures of Medium from -30 C to 150 C (water at 0 C to 110 C).

MaterialsBody DZR copper alloy, CW617NBall DZR copper alloy, CW617N, full bore, Surface chrome platedSpindle DZR copper alloy, CW614NLocking bolt Aluminium red paintedSealings Ball: PTFE, Spindle: PTFE

Honeywell VC Series balanced 2-position hydronic valves are used in domestic and small commercial heating and cooling applications to control the flow of hot and/or cold water. They consist of an actuator, valve and a cartridge assembly 2-way valves are designed for on-off zone control of domestic systems. 3-way valves can be piped for either diverting or mixing valve applications in domestic central heating and/or cooling systems. Both versions can be used to control individual fan coil, radiator, space heater or convector applications. Depending on the model selected they can be controlled by a low or line voltage SPST or SPDT controller such as a room thermostat, aquastat or flow switch. VC Series hydronic valves are designed to take advantage of sinusoidal valve actuator travel, and therefore operate silently and reduce water hammer. Through internal logic the actuatoronly takes power while driving the valve to the commanded position. The actuator head is removable without affecting the integrity of the water system. All actuator versions are interchangeable with any valve body, offering the highest flexibility for boiler production line assembly, and maintenance. The valve piston construction allows for port sealing that is independent of the differential pressure across the valve. Flow through the 2-way valve can be in either direction, so the ports are not designated. 3-way valves are suitable for both diverting water from AB to A or B, and from A or B to AB.

Features

Rugged designControl by a low or line voltage SPST or SPDT controllerMinimal actuator power consumptionPressure differential up to 4 barDouble insulated actuatorQuick connect electrical connectionsQuick and easy replacement of moving partsActuator head installation does not require draining of the systemHigh flow rate capacity

Features & Benefits

• • Check valves permit flow in one direction only and close automatically if flow reverses, depending upon pressure and velocity of flow to perform the functions of the opening and closing
  • EPDM rubber seat to facilitate quiet operation and improve disk seating
  • Eyebolt tapped holes in sizes DN200 and above, to fit bolts to BS EN ISO 3226:2010 (eyebolts are not supplied with product)
  • Design and construction lends itself to pump duty applications
  • Non-Slam design as a result of rubber seat and spring-assisted closure

• Aluminium Bronze disc
• Stainless steel shaft
• Gearbox operated
• Valves are suitable for use with flanges conforming to BS EN 1092-2PN10 or PN16 Sizes 65-200mm
• BS EN 1092-2 PN16 flanges only Sizes 250-600mm PN16 only
• F625 sizes 50-300mm are WRAS approved

F629 Suitable for Group 2 liquids only as defined by the Pressure Equipment Directive 97/23/EC.*

• Aluminium Bronze disc
• Stainless steel shaft
• Trigger lever
• Valves are suitable for use with flanges conforming to BS EN 1092-2PN10 or PN16
• F624 is WRAS approved

• • Check valves permit flow in one direction only and close automaticallyif flow reverse.
  • Entirely automatic in action, depending upon pressure and velocityof flow within the line to perform their functions of opening and closing
  • Swing pattern, bronze trim, resilient seated
  • Swing pattern, metal faced disc

Butterfly valvesare composed of two semi-circular plates hinged on a common spindle. Butterfly valves areused to permit flow in one direction only. Comeroffers a wide variety of butterfly valves in many materials and sizes.

This valve reduces the pressure of the water that goes through it, and is used to obtain a regulated and constant value at its outlet. It is installed at the water mains (for a bungalow as for a flat). It protects the whole installation from problems due to excess pressure : noises in the pipes, water hammer, splashes, premature wear of household electrical appliances and taps. The pressure reducing valves are completely automatic.

Suitable for domestic water services, heating & Air-Conditioning plants, Compressed Air Systems. It can be installed in any positions: VERTICAL, HORIZONTAL, OBLIQUE.

Compensated operation

Female/female threadsBody in nickel-plated brassMinimum and maximum working temperatures: 0C, 130C in absence of steam.Maximum inlet pressure: 25 barOutlet pressure can be adjusted between 0.5 and 6 bar.Factory pre adjustment: 3 barOutlet pressure gauge connections on both sides.

The thermostatic mixing valves Aquamix Series 61C, 62C and 61CM are offered in versions with male and female connections as well as 4 setting positions. The valve body is made of brass nichel-plated on both inside and outside; moreover an inner teflon coating is provided in order to reduce scaling caused by hard water. Each valve is provided with two mesh strainers which, when inserted inside the hot water (+) and cold water (-) ports avoid depositing of coarse particles thereby protecting valve operation.

AQUAMIX.Thermostatic mixing valve with 4 set positions. Anti-scald protection.Setting range: 32C 50C. Max. differential pressure: 2 bar. Female connections.Without internal check valves.

FLOATVENT Automatic vertical air vent valve. Sealed with O-ring. Designed for installation on head connections of flush manifolds. Brass CW617N body. Max. pressure: 10 bar. Max. temperature: 110C