Post Your Requirement Menu

Welcome User

Other Products / Services

Our product range comtains a wide range of Makita Blower, CRAYFLEX FLEXIBLE DUCT INSULATED, BASIN MIXER INFINITY, BASIN MIXER WITH POP UP WASTE BRASS and HAND DRYER ELECTRONIC SENSOR TYPE AUTOMATIC WALL MOUNT

Makita Blower

Product Description The Makita Blower (model UB1103) is a go-to tool for fast clean upon the jobsite or in the workshop. The Blower is powered by a 6.8 AMP motor with a variable speed control dial and trigger with lock-on for added convenience. With a maximum air speed of 203 MPH and a maximum air volume of 145 CFM, you’ll get faster clean-ups. The blower can also be used as a vacuum; simply move the nozzle to the vacuum port and connect the dust bag. SPEED  : Delivers a Maximum Air Speed of 203 MPH for Faster Job Site Clean Up PERFORMANCE  : Variable speed control dial and trigger (0-16, 000 RPM) for increased performance EFFICIENCY  : Maximum air volume of 145 cfm for faster clean up in larger areas CONVENIENCE  : Two tools in one; quickly converts to a vacuum for added versatility INCLUDES  : Nozzle and dust bag FEATURES Variable speed control dial and trigger (0-16, 000 RPM) for increased performance Maximum air volume of 145 cfm for faster clean up in larger areas Two tools in one; quickly converts to a vacuum for added versatility Ergonomic handle designed for increased operator comfort Large trigger with conveniently located lock-on button Compact design at only 18-7/8” long Weighs only 4.3 lbs. for reduced operator fatigue Unique design provides easier storage in a self-standing position Includes large dust bag for vacuum mode Ideal for job site, residential and general clean up Optional long nozzle available (part no. 134182-7) for harder to reach areas Optional nozzle with wider tip (part no. TP00000199) is ideal for leaves and yard debris

View Complete Details

CRAYFLEX FLEXIBLE DUCT INSULATED

Crayflex® 13APM is made of triple lamination of aluminum foil, polyester and metallized polyester film permanently bonded to a coated spring steel wire helix

View Complete Details

BASIN MIXER INFINITY

  • Brass acc. to EN 1982, nickel-/chromium-plated i10

View Complete Details

BASIN MIXER WITH POP UP WASTE BRASS

Product Description Chrome-plated brass. Single lever operation. Suitable for high and low pressure systems. 1)  Single Lever Operation 2) High & Low 3)  Chrome Finish 4)  Pop-Up Waste   SPECIFICATION Flow Rate (Ltr/Min) – 4.9 Ltr/min Minimum Bar Pressure – 0.1 bar Mount Type – Deck-Mounted Pieces in Pack/Case – 1 Pressure Suitability – High & Low Tap Style – Contemporary Tap Suitability Type (Bathrooms) – Basin

View Complete Details

HAND DRYER ELECTRONIC SENSOR TYPE AUTOMATIC WALL MOUNT

Product Description Features: LOW NOISE 0-50 SECONDS DRY TIME MOUNTING SCREWS INCLUDED NO NEED FOR TOUCHING RUST RESISTANT

View Complete Details

HOTEL FROSTED SOAP DISH

Product Description The ANBI collection is designed to be inviting, homely and user-friendly the perfect addition to a modern bathroom. The Hotel series range gives you a simple contemporary design that compliments almost any style. ANBI design and manufacture their products using the finest methods and materials to ensure a high quality product. Dimensions – (W)110 x (D)140 x (H)55.75mm Material – Brass Finish – Chrome Plated Product Type – Contemporary Frosted Glass Soap Dish Chrome plated to BS EN 248

View Complete Details

TOWEL ROD SS

Product Description Timeless and deliberate, the Composed collection embodies the beautifully understated elements of minimalist design. By eliminating unnecessary details, the collection is designed to elicit an emotional response with its stark, refined beauty. This 45Cm (17.71 Inch) towel bar complements composed faucets and accessories. FEATURES Wall Mounted Premium metal construction for durability. Mounting Accessories included Chrome Finish Coordinates with faucets and accessories in the Composed collection. Codes/Standards None Applicable

View Complete Details

FILL VALVE BOTTOM PVC FLUIDMASTER

Product Description The 400UK will work in most toilets including some 1 Piece toilet models. To see if the fill valve will fit in your toilet measure the flush valve drain (overflow pipe) from bottom of  the tank to its open ended top. If the flush valve drain is 6 inches or taller the 400UK valve should fit. Some toilet models not supported would be Flapperless, Low Bay 1 Piece Toilets and Side Entry Valves. Replaces ballcocks universal fill valve Easy to install Height adjusts 9″-14″ Refills quickly Universal fit for 1 and 2 piece toilets Corrosion-resistant material Anti-siphon operation, code approved Won’t contaminate fresh water supply

View Complete Details

BLACK MILD STEEL END CAP

  • Wrought Steel ASME B16.9 Welded
  • PRC 2″ to 12″

These end Cap feature carbon steel construction and are suitable for use in HVAC, chemical refineries, fertilizer and petrochemical plants and in gas, oil and water transmission systems.

View Complete Details

BLACK MILD STEEL CONCENTRIC WELD REDUCER

These Conc Reducer feature carbon steel construction and are suitable for use in HVAC, chemical refineries, fertilizer and petrochemical plants and in gas, oil and water transmission systems. Product Description These Conc Reducer feature carbon steel construction and are suitable for use in HVAC, chemical refineries, fertilizer and petrochemical plants and in gas, oil and water transmission systems.

View Complete Details

PVC HP END CAP COMER

  • UPVC Solvent
  • CA73 1/2″ to 4″

Product Description PVC End Caps are solvent cemented to the end of a pipe by inserting the pipe into the socket of the cap. The caps have a flat end which makes them ideal for fabricators who wish to drill and/or thread small components into them. The caps are designed for pipe of the same size category to be solvent cement welded into them. Our PVC plain end caps have a pressure rating of greater than 10bar and are fully WRAS approved for use with drinking water.

View Complete Details

PVC HP MALE SOCKET ADAPTER

Product Description PVC Hexagon Nipple – Male BSP Threaded, manufactured by Comer. Available in a range of imperial sizes from ANBI Trade Div. If you require a size that is not listed, please contact us. PVC-U is a solvent welded, fully matched pipework system incorporating pipe, fittings and valves that are available in both imperial and metric sizes. Furthermore, Comer PVC-U is fully WRAS approved, is lightweight, easy to install and is corrosion resistant.

View Complete Details

FLANGE BLIND MS

Product Description Commonly used to blank off pipelines, valves, and pumps, or as an inspection cover, this ANBI APPROVED blind flange allows you to bolt 2 flanges together with a gasket to form a tight seal that still eases access to the piping system. This model is sometimes referred to as “blanking flange” and is for use with air, water, oil, natural gas, or steam.

View Complete Details

FLANGE SLIP-ON WELDED MS

Product Description This slip on flange allows you to bolt 2 flanges together with a gasket to form a tight seal that still eases access to the piping system. For use with air, water, oil, natural gas, or steam. • Flange slips over the pipe and is then fillet welded • Excellent for fabricated applications

View Complete Details

Flange Weld Neck

Product Description This weld neck flange allows you to bolt 2 flanges together with a gasket to form a tight seal that still eases access to the piping system. Attaches to system via a circumferential weld at the neck; welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. • For use with air, water, oil, natural gas, or steam • Excellent in critical applications

View Complete Details

BRASS PEGLER FLOAT VALVE

Product Description Float valve MOH, Portsmouth pattern Mechanical Float Valves are used in commercial, industrial, and agricultural applications for controlling high capacity water flow and can be tank wall-mounted.

View Complete Details

FLOW CONTROLLER WITH INTEGRATED CONTROL VALVE

Product Description Flow Controller with Integrated Control Valve made of cast iron GG 25, flange according to EN 1092-2, PN16. Suitable for controlling the flow rate in cold and hot water systems. Max. differential pressure 4 bar. Max. diff. pressure accross the restrictor 0.2 bar. Temperature range: 5°C to 120°C Gasket material FPM Cones WN1.4057, stem WN1.4404 seat material WN1.4021 Impulse tupe WN1.4301 Diaphragm material EPDM.

View Complete Details

PRESSURE INDEPENDENT BALANCING CONTROL VALVE

Product Description A Pressure Independent Control Valve, or PICV as it is commonly known, is a multi-functional valve, combining the operation of 3 different valves in one convenient and compact unit.  The PICV acts as a differential pressure control valve, a regulating valve and a 2-port control valve. Use of these valves in a commercial heating or cooling system allows comfort levels to be optimised at least cost, reducing ongoing energy consumption and improving the efficiency of the system to outstanding levels. Significant cost and installation benefits can be gained by installing PICVs. Use of these eliminates the need for conventional commissioning or balancing / regulating valves as well as 2-port control valves, differential pressure control and their respective partner valves, as seen in conventional HVAC systems. Compact design, dezincification resistant brass body, external thread connection and with cone, Combined flow rate controller and control valve, pressure independent. Actuator mounting threaded connection M 28 x 1.5 with operating range 4.0 mm. Compression adapters and press connections have to be ordered separately. The actuating drive is not included.

View Complete Details

PRESSURE REDUCING VALVE COPPER ALLOY

Product Description Lead Free* Cartridge Style Water Pressure Reducing Valves Lead Free* Models Available Size(s): 1/2 to 2 in. (15 to 50mm) Series LFX65B Lead Free* Water Pressure Reducing Valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. The LFX65B is a cartridge style regulator and is orderable three ways: As a complete, ready-to-install regulator, or as a separate rough-in kit consisting of a Lead Free* cast copper silicon alloy body with integral strainer, or as a separate cartridge assembly.

View Complete Details

PRESSURE REDUCING VALVE DUCTILE IRON

Manufacturer: Honeywell EAN: 4019837137038 Weight (kg): 34.5 Type: diaphragm-controlled pressure reducer, PN 16, DN 100 A pressure regulator protects plants against too high supply pressure. This can also be used in buildings for residential, industrial and commercial purposes, taking into account its specifications. When using a pressure reducer prevents pressure damage and the water consumption reduced. The set outlet pressure is maintained even at strongly fluctuating inlet pressures constant. By Reducing and keeping Constant the operating pressure can be minimized disturbing flow noise within the Installation. Requiring maintenance valve according to DIN EN 806-5. Approvals DVGW, WRAS, NF, KIWA – and SVGW-certified for DN65 to 100. ACS and WRAS applied for DN150 to 200. Medium Water/Air Medium water, compressed air according to ISO 8573-1 class 2 in consideration of valid Standards(e.g. EN 12502) Housing material ductile iron Material spring bonnet of ductile iron Coating powder coated Pipe Connection Flanges Max. Medium temp. 65 °C Stat. Pressure PN16 – Relieved single-seat valve Yes Additional Description • Patented cartridge solution for easy Assembly and maintenance • Two Cartridge inserts for all nominal sizes to facilitate efficient storage • Meets all requirements of DIN EN 1567 • All materials used below the in DIN 50930, part 6, limits for lead content • Functionality and performance, confirmed by Long-time endurance test with over 400, 000 cycles (according to DIN EN 1567: 200, 000 cycles) • Complies with hygiene requirements in accordance with KTW, W270, ACS and WRAS for potable water • DN125 available with adapter flanges DN100 / DN125, EXF125-A CAD drawings DXF DWG to STEP IGES SAT Installation Guide (Multilingual)

View Complete Details

PRESSURE REDUCING VALVE DUCTILE IRON WATTS

Product Description Application: The Watts M115 Pressure Reducing Valve is designed to adjust, set and maintain downstream pressure of pipeline. It’s generally used in city water supply, industrial and agricultural water transmission pipeline, etc. Features: 1. Stable performance, safe and reliable; 2. Simple operation, convenient adjusting; 3. Precise pressure reducing; 4. Long service life.

View Complete Details

STRAINER FLANGED CI

Product Description HERZ-Strainer, Y-shape, with flanged connection. With fine-mesh screen made of chrome-nickel steel. Mesh width 0.75 mm. Cast iron body GJL 250 according to EN 1561, flange according to EN 1092, PN 16; length according to ÖNORM EN 558-1, basic series 1, with blue enamel coating. Cover with drain bore and drain plug 1/2. Four bores Rp 1/4 with drain plug for differential pressure measurement. Test points 1 0284 01 and 1 0284 02 have to be ordered separately.

View Complete Details

FCU VALVE PACKAGE COMPACT COMMISSIONING

Product Description Company HERZ always think about future, trying to extend the product range in order to fulfill every demand, and every task that industry gives. One of the latest products that were introduced by HERZ is the Compact Connect 4 -simple and reliable fan coil connection – if the project requires a special compact solution- we are happy to serve. Everything needed for a successful connection of the terminal unit is supplied in one package. Advantages: • Minimized design time and risks due to complete solution • Perfect performance of the complete unit • Compact design for limited space availability • Minimized installation and commissioning costs • Allows easy flushing and coil isolation • Simple attachment to existing hangers • Integrated fi tting lug for ease of installation • High comfort with minimized operation and maintenance costs • Connecting kit for terminal units • Reduced on-site working time • Factory proved for minimum leakage risk • No flushing via the regulating valve  

View Complete Details

THREADED B WATER METER

Product Description Multi jet, dry dial, direct reading. Made in the version for cold water (30°C) in the diameters 15 to 50 mm (1/2″÷2″). Risks of corrosion and sedimentation free. Antimagnetic protection upon request. Long durability and elevated precision guaranteed. Approved according to MID standards up to R160H. The multi-jet water meter is used both in the domestic and the industrial field. The principle of operation is to force the passage of the inlet water flow through a series of ducts open in a capsule, called distributor, containing the turbine. The entrance of the water through the ducts generates a series of symmetrical jets that impact the turbine keeping it in perfect balance. There are three multi-jet water meter types: – Wet dial meters with the reading mechanism completely immersed in the water and direct transmission from the turbine to the gears of the mechanism itself. – Semi dry dial meter with the reading mechanism completely immersed in the water and the rollers protected in a sealed capsule. Direct transmission from the turbine to the gears of the reading mechanism. – Counter dry dial, with clockwork separated from the flow of ‘water. In this case the transmission gears to watch takes place via magnetic coupling.

View Complete Details

HONEYWELL REFRIGERANT GAS GENTRON

Honeywell Refrigerants Gas is the established technical leader in the development of fluorine-based (HFC) refrigerants. Honeywell Refrigerants Gas Genetron R410a 11.3kgs USA Honeywell Refrigerants Gas is the established technical leaderin the development of fluorine-based (HFC) refrigerants for the commercial and industrial refrigeration industry worldwide. And, as you would expect from a world-class supplier, we have been at the forefront of the industry’s drive to develop these safer, non-ozone depleting alternatives to the older technology, environmentally unfriendly CFC and HCFC refrigerants, in compliance with global legislation for their phase-out. To ensure that customers are fully supported in this transition, Honeywell has dedicated its research resources to developing a comprehensive range of alternative intermediate and long-term refrigerants, that are not only safer to use but that are able to meet or surpass the performance levels of the products they replace. For commercial and industrial refrigeration replacement of (CFC) Genetron® 502 and (HCFC) Genetron® 22 are the industry’s principle focus. Honeywell’s long-term solutions for low and medium temperature applications are Genetron® 507 and Genetron® 404A, both non-ozone depleting refrigerants. Genetron® 507 is an azeotropic blend of HFC-125 and HFC-143a, and Genetron® 404A is a blend of HFC-125, HFC-143a and HFC 134a. Both options can give a high level of efficiency with performance and characteristics similar to Genetron® 502, and be used as replacements in retrofits as well as in new equipment. Honeywell Refrigerants Gas Introduction Honeywell Refrigerants Gas is a global leader in the development and production of high-performance fluorocarbon refrigerants and thermal working fluids. Our customers include original equipment manufacturers, service technicians and facility managers, and consumers around the world. The elimination of ozone-depleting refrigerants and chemicals continues to be a key environmental focus for Honeywell as countries phase out these chemicals in accordance with the international agreement “Montreal Protocol on Substances that Deplete the Ozone Layer.” We have invested in both R&D and manufacturing capacity to help countries and companies meet our commitments to this global effort by moving to non-ozone depleting alternatives. At Honeywell, we see Responsible Care as the foundation of environmental, health and safety excellence in our business. We incorporate HSE management systems into all phases of the chemical life cycle. Our commitment to continuous health, safety and environmental performance improvement is evident at our facilities around the world – it is the way we do business.

View Complete Details

DIELECTRIC UNION

Product Description Dielectric Unions features a female steel pipe thread to female brass pipe thread connections. These unions are designed to be installed between pipes made from dissimilar metals to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It Consists of a union nut, two tailpieces, a gasket & a sleev that separates the tailpieces to prevent an electric current from occurring. This is ideal in applications such as commercial and residential as hot water storage tanks, chilled water, processing tanks, steam, gas and other water piping applications. max Pressure – 250PSI (17.2bar) max Temp – 180DegF Connection Type – FPT Steel Pipe x FPT Brass Pipe

View Complete Details

SHOWER MIXER INFINITY

  • Brass acc. to EN 1982, nickel-/chromium-plated i40

View Complete Details

canvas cloth

Canvas is commonly used with mastics or coatings to provide a protective barrier over pipe and duct insulation. Stocks 6 oz. and 8 oz. varieties of canvas. Product Description Canvas is commonly used with mastics or coatings to provide a protective barrier over pipe and duct insulation. Stocks 6 oz. and 8 oz. varieties of canvas. Its 100% cotton fabric used for insulation of Galvanized Steel ducting. 6 oz. Canvas Specifications: First Quality Material 100% cotton greige single filled osnaburg Approximately Width -1 YARD (36inch) x Lgth- 20YARD (720inch) Thread Count = 36 x 28 Weight = .51 Lbs/LY

View Complete Details

DRAIN CLEANING ROD SET

  • Material Polypropylene with brass plates end connection
  • Rod Length Individual Rod : 1Mtr approx
  • Package Contents 10 x Rods 1 x Double Worn Screw 1 x Plunger Attachment   and other attachments.
  • Package Weight 1.95kg approx.
  • Package Dimensions 102cm x 12cm x 7cm approx.

Product Description Keep your drains clean with this set of 10 rod drain cleaners. Easy to use, it’s a fast DIY alternative to calling your plumber. Its sturdy rods attaches to form one long rod and includes a plunger attachment. This is a handy tool to have in your home for plumbing emergencies. Features: 10 Rods Attach Together To Form One Long Rod Sturdy and Durable Plunger Attachment Included Easy To Use

View Complete Details

AEROFOAM RUBBER INSULATION SHEET And ROLL

Aerofoam ®  NBR Rubber Insulation Rolls and Sheets  are closed cell elastomeric foam structures with a non-porous composition that offers high thermal efficiency and protection from imminent condensation problems Aerofoam ®  NBR Rubber Insulation Rolls and Sheets  are closed cell elastomeric foam structures with a non-porous composition that offers high thermal efficiency and protection from imminent condensation problems, and helps as sound absorber. Depending on the requirements of the market, this product can be coated with different types of foils and have a factory-applied self-adhesive backing. The installation time is reduced more than 40% due to the ease in cutting as well as quick adhesion of the material. Aerofoam ®  NBR Rolls and Sheets come in handy where Aerofoam ®  (NBR) Nitrile Tubes cannot be used on pipes with big diameter. Other applications include ventilation ducts, tanks, and reservoirs, engine rooms as  sound and thermal protection . Not only are they environmentally friendly, they pose no harm to human health, it has zero Ozone Depletion Potential (ODP), Global Warming Potential (GWP) of less than five, and a low Volatile Organic Compound (VOC) of less than 6 µg/m 2 /hr in 24 hours.  Aerofoam® NBR Rolls and Sheets comply with LEED requirements.

View Complete Details

DZR BRASS EXTENDED SPINDLE BALL VALVE

  • Forged DZR brass acc. EN 12420 (corrosive resistant), Female thread acc.ISO 228
  • 2190 EU

Dezincification resistant brass, full bore, machined to a microsmooth finish, female thread acc. ISO 228 Minimum temperature: -10 °C (short period -50 °C), water 0.5 °C. Maximum temperature: 130 °C (short period 150 °C), water 110 °C.

View Complete Details

CHECK VALVE BRASS SPRING

Product Description Suitable for domestic water services, heating and air-conditioning plants, compressed air systems. They can be installed in any position: vertical, horizontal, oblique. Body in brass. Plate in polymer. Washer in NBR. Spring in stainless steel. Minimum and maximum working temperatures: -20°C, 100°C. Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).

View Complete Details

PRESSURE RELIEF VALVE CALIBRATED WATTS

Product Description Sizes: 1⁄2″ or 3⁄4″ (15 or 20mm) Series 530C Calibrated Pressure Relief Valves are spring operated brass valves designed for use only as protection from the build up of excessive pressure in systems containing water, oil or air. Series 530C valves incorporate a calibrated adjustment feature for setting the valve to the relief pressure required. These valves are ideally suited for bypass thermal expansion relief. Features • Calibrated adjustment feature for setting valve to relief pressure required • Adjustable range 50 – 175psi (3.4 – 12.1 bar) • All brass construction • All stainless steel spring • Buna-N disc on machined body seat • Inlet (bottom), male NPT threaded • Outlet (side), female NPT threaded Pressure – Temperature Maximum Temperature: 180°F (82°C) Spring Ranges 1⁄2″ or 3⁄4″ (15 or 20mm): 50 – 175psi (3.4 – 12.1 bar) 3⁄4″ (20mm): 100 – 300psi (6.9 – 20.7 bar) Application Note: The Watts Series 530C are not ASME approved safety relief valves and should not be used in system application with this requirement.

View Complete Details

thermostatic mixing valve

Product Description HERZ-Mixing valve with two-port flow direction 25 l/min, 3 bar of water pressure, with water quantity min. 4 l/min, factory setting of mixing temperature 38–48 °C ± 2K mixing precision. Features and benefits • Optimised thermostat technology for best control quality and longer durability • Excellent temperature stability with a fast reacting thermostat to reduce the risk of uncontrolled high water temperature • Designed for high flow-rates and for a stable outlet temperature • Build-in with check valves in hot and cold water supply • Body and parts in contact with water are made of dezincification resistant brass Material Body: DZR brass CC752S Spring: Stainless steel 1.4310 Internal parts: DZR brass CW626N Stem: DZR brass CW626N Handweel: ABS Sealing: EPDM

View Complete Details

FLOW MEASURING ORIFICE PLATE

Product Description Stainless steel disc with extended test points Maximum working temperature 120°C Maximum static pressure 16 bar Kv-values, also pressure and temperature ratings, comply with requirements of BS7350 Kv-values in m3/hour at a pressure drop of 1 bar.

View Complete Details

BALL VALVE BRONZE

  • Bronze BS EN 1982 CC491K Threaded Female
  • D171 1/2″ to 3″

Crane D171 Ball Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the D171 and D171EXS are WRAS approved.

View Complete Details

GALVANIZED IRON REDUCING BUSHING

  • GI (Galvanized Iron) BS6681 Threaded Female BSPT BS21
  • 241 Thailand

View Complete Details

GALVANIZED IRON END CAP

  • GI (Galvanized Iron) BS6681 Threaded Female BSPT BS21
  • 291 Thailand

View Complete Details

ELBOW GI

  • GI (Galvanized Iron) BS6681 Threaded Female BSPT BS21
  • 120 Thailand

View Complete Details

ELBOW REDUCING GI

  • GI (Galvanized Iron) BS6681 Threaded Female BSPT BS21
  • 90R Thailand

View Complete Details

ELBOW STREET GI

  • GI (Galvanized Iron) BS6681 Threaded Female BSPT BS21
  • 92 Thailand

View Complete Details

MALLEABLE IRON REDUCING BUSHING

  • MI (MALLEABLE IRON) Threaded Female BSPT
  • 241 Thailand

View Complete Details

COUPLING (SOCKET) MI

  • MI (MALLEABLE IRON) Threaded Female BSPT
  • 270 Thailand

View Complete Details

ELBOW MI

  • MI (MALLEABLE IRON) Threaded Female BSPT
  • 120 Thailand

View Complete Details

LOCKNUT MI

  • MI (MALLEABLE IRON) Threaded Female BSPT
  • 312 Thailand

View Complete Details

CAPCO AC CAPACITORS

  • India 3MFD to 60MFD

Conforming to IS 2993 (for Motors). IS 1709 (for Fans), IS 1569 (for lighting fixture) are manufactured by using Zinc Alloy, Heavy Edge Metalised Polypropylene Film and encapsulated

View Complete Details

ANGLE VALVE CP BRASS HOT OR COLD

Product Description 1/2″ x 1/2″ angle valve with tricorn handle supplied with both hot & cold indicator. 2 Years Guarantee on the product.

View Complete Details

FILL VALVE SIDE ENTRY

Product Description Quiet valve (UK ½”) that works well with high or low pressure systems. For toilet cisterns and storage tanks. Unique quick-release and no lever arm to distort tank. Seals are easy to access and simple to change. Durable materials capable of withstanding millions of flushes. Plastic Height: 222mm Suitable for High & Low Pressure Systems Side-Entry Cisterns ½”

View Complete Details

Butterfly Valve

Butterfly valves provide bi-directional dead-end service in commercial and industrial service. To make your selection easier, ANBI offers specification and submittal assistance. You also get the assurance of the HERZ warranty, along with superior customer service expertise. Product Description These valves are available in Lever & Gear Type and is suitable for Semi & Fully Lugged Type. The butterfly valve have the body, Type „BA“: GG, JL 1040, accor. EN 1561 Type „BB“: GGG, JS1030, accor. EN 1563. The body has blue color (RAL 5017). Inside the body is a rubber liner made of EPDM in accordance with an ISO 1691, the disc is made of brass, nickel plated and the drive shaft split into 2 parts is made of Stainless Steel 1.4021 accor. to EN 10088. The valve are available in Semi-lugged (type BA) or Fully-lugged (type BB) versions.

View Complete Details

DOUBLE REGULATING FIXED ORIFICE VALVE

Product Description Dezinfication resistant brass body, Hand wheel operated, numerical indicator, inside screw non rising handwheel, Memory stop inner spindle, integral fixed orifice, supplied with two test points. Extended test points available 0284-11 blue, 0284-12 red End connections threaded according to ISO 7/1. Manufactured to BS 7350 PN 20 Series B The HERZ 4017 DZR combined regulating and measuring valve has an integral orifice incorporated into the valve casting. Available in sizes from DN15 to DN50, ½” to 2”, with BSP female threaded ends to BS21 and manufactured to BS 7350. The valve is also available in Low Flow and Medium Flow DN15 versions. The commissioning valve has hidden regulating and locking functions with high accuracy and good repeatability. The valve is fitted with two standard pressure test points, extended test points are available when required. A ‘Micro-set’ two number position indicator is fitted to the adjustment handle for recording the valve position.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • ANBI General Trading L.L.C
  • P.O Box - 112089 Showroom - 8 & 9, Rigga Street Deira, Dubai, Dubai, United Arab Emirates