ANBI GENERAL TRADING LLC

dubai, United Arab Emirates

Chrome-plated brass. Single lever operation. Suitable for high and low pressure systems.

PVC plain socket couplings are designed to link two pieces of UPVC pipe together in a straight line. PVC pipe of the same size category is solvent cemented into each side. The PVC socket couplings have a pressure rating of greater than 10bar and are fully WRAS approved for use with drinking water.

PVC stub flanges Cepex are designed for use in combination with PVC backing rings or metal backing rings and stub gaskets or full face gaskets.
Using stubs and backing rings, rather than full face flanges makes assembly of a pipe system much simpler as the bolt holes of the flange.
do not have to match up when solvent cementing parts together. After assembly, the flange ring can be spun round to align holes.
Our PVC plain stub flanges have a pressure rating of greater than 10bar and are fully WRAS approved for use with drinking water.

GUNK CRAB & CHOKE CLEANER M 4814, leans carburetor, choke linkage and manifold heat controls.

Description:

With engine cold, remove air cleaner. Spray product over exterior of carburetor and linkage. Let soak. Respray to flush off dirt. With gear in neutral or park, set parking brake and start engine. Spray bursts into carburetor while lightly revving engine. If engine stalls, restart before continuing cleaning process.

APPLICATIONS:Deep Clean, High Output SprayLifts Stains And MudFoam Cleans Dirt And Oil From Carpet, Fabric, Vinyl And Leather

DIRECTIONS: 1. SHAKE CAN WELL BEFORE USING. 2. Spray foam cleaner and let sit for 30 seconds. 3. Brush into carpet with a damp cloth or sponge. 4. Allow area to dry, then vacuum. 5. For vinyl and upholstery, wipe with cloth. NOTE: Test for colorfastness in a small area that is out of sight.

STORAGE, HANDLING & DISPOSAL: Do not puncture or incinerate container. Do not expose to heat, sparks, open fl ame, or store at temperature above 120F/49C. Use and dispose of container, product and residue in accordance with all local, state and federal laws and regulations.

DANGER: May irritate eyes, skin, or respiratory system. Use with adequate ventilation. Keep away from open fl ame or sparks. Inhaling concentrated vapors, intentionally or otherwise, can cause death without warning.

FIRST AID: EYE CONTACT: Flush thoroughly with water for 15 minutes while lifting eyelids occasionally and get prompt medical attention.SKIN CONTACT: Wash with soap and water. If irritation persists, get prompt medical attention.INHALATION: Move to fresh air. If breathing becomes difficult, get prompt medical attention.INGESTION: DO NOT INDUCE VOMITING. Call Poison Control Center, Physician, or Hospital Emergency Room Immediately.

KEEP AWAY FROM CHILDREN AND ANIMALS

GENERAL DESCRIPTION
The T2000 thermostats provide heating, cooling and ventilating control for year-round air-conditioning units in commercial, industrial or residential installations.
There are model for cooling only, heating only and heating-cooling fan coil system can be integrate with the manual or remote heat-cool changeover control.
Integral with heavy duty slide switches provide HIGH-MED-LOW fan speed selection and ONOFF
or HEAT-OFF-COOL system control.
T2000 series thermostat is suitable for 2-pipe or 4-pipe fan coil application, which can be fitted with the VB5000 zone valve and VA7010 actuator.
These thermostats are used for low / line voltage application, and typical uses include fan coils, electrical heaters and air handling units.
FEATURES
q Rust-proof plastic base and cover
q System OFF position breaks all circuits
q No leveling and vibration problems

Commonly used to blank off pipelines, valves, and pumps, or as an inspection cover, this ANBI APPROVED blind flange allows you to bolt 2 flanges together with a gasket to form a tight seal that still eases access to the piping system. This model is sometimes referred to as blanking flange and is for use with air, water, oil, natural gas, or steam.

This slip on flange allows you to bolt 2 flanges together with a gasket to form a tight seal that still eases access to the piping system. For use with air, water, oil, natural gas, or steam.

Flange slips over the pipe and is then fillet weldedExcellent for fabricated applications

This weld neck flange allows you to bolt 2 flanges together with a gasket to form a tight seal that still eases access to the piping system. Attaches to system via a circumferential weld at the neck; welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline.

For use with air, water, oil, natural gas, or steamExcellent in critical applications

The ANBI collection is designed to be inviting, homely and user-friendly the perfect addition to a modern bathroom.The Hotel seriesrange gives you a simple contemporary design that compliments almost any style. ANBIdesign and manufacture their products using the finest methods and materials to ensure a high quality product.

Frosted Glass Soap Dish
Chrome plated to BS EN 248

The HERZ Motor Valve Drives are electromotive actuators for valves used in heating and cooling systems. The control of the HERZ Motor Valve Drives are performed by a 0 10 V DC control signal via a central DDC system or by a room thermostat. The actuators are equipped with a LCD display with background illumination for displaying the current stroke, the control voltage, and the operating modes (open/close), as well as for the output of error codes. The actuators are equipped with a plug-in connection line as well as with a manual stroke setting, which can be used e. g.for maintenance or dismantling purposes. The predominant filed of application is the energy-efficient control of water bearing valves in the area of building services and automation.

5 7712 08: Equal percentage characteristic.

FunctionThe actuator mechanism of the HERZ Motor Valve Drive works with a stop motor, an intelligent micro controller and a gearing mechanism. The force generated by the movement direction is transferred to the valve pressure plate, thus opening or closing the valve. The actuator is installed directly to the upper part of the small valve. The actuator is supplied with a retracted valve pressure plate.

Normally closed, closing force 100 N, operating voltage 230 V , threaded connection M28 x 1.5, red adapter 1 7708 90 is included, max. stroke 5 mm

The HERZ-Actuator 230 V / 24 V is a thermoelectric valve drive for opening and closing valves on heating circuit distributors of concealed floor heating and cooling systems. The main field of application is the energy-efficient individual room temperature control in the range of building management systems and home automation. The HERZ-Actuator 230 V /24 V is controlled by a 230 V / 24 V room thermostat with two point output or pulse-width modulation.

The actuating drive is switched on via an electrical contact, e.g. from a room thermostat, and starts opening or closing the thermostatic valve. The actuating movement is accomplished by an electrically-heated expansion element. When the heating current is switched off, the valve closes or opens respectively. The HERZ actuating drive is maintenance-free and offers silent operation.

KLUDI began manufacturing bathroom fittings using traditional methods of craftsmanship. Followed by high-quality, reliable fixtures of timeless design, this expertise formed the foundation of KLUDI. From the tradition as a faucet specialist, the goal was created to combine the highest quality of use and perfect design in a unique way. Thus the claim Water in Perfection finds unmistakable expression in our products as well as in all services we provide for our customers. It inspires and drives our future activities.

SET INCLUDES:

• L= 600 mm
• KLUDI LOGO wall way
• KLUDI LOGO 3S handshower DN 15
• Adjustable to 3 way pattern: Volumen, Booster, Smooth
• Cleaning System
• KLUDI LOGOFLEX-hose: G 1/2 x G 1/2 x 1600 mm
• Plastic Coated

This slip on flange allows you to bolt 2 flanges together with a gasket to form a tight seal that still eases access to the piping system. For use with air, water, oil, natural gas, or steam.

Flange slips over the pipe and is then fillet weldedExcellent for fabricated applications

This weld neck flange allows you to bolt 2 flanges together with a gasket to form a tight seal that still eases access to the piping system. Attaches to system via a circumferential weld at the neck; welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline.

For use with air, water, oil, natural gas, or steamExcellent in critical applications

Commonly used to blank off pipelines, valves, and pumps, or as an inspection cover, this ANBI APPROVED blind flange allows you to bolt 2 flanges together with a gasket to form a tight seal that still eases access to the piping system. This model is sometimes referred to as blanking flange and is for use with air, water, oil, natural gas, or steam.

Honeywell Refrigerants Gas is the established technical leaderin the development of fluorine-based (HFC) refrigerants for the commercial and industrial refrigeration industry worldwide. And, as you would expect from a world-class supplier, we have been at the forefront of the industrys drive to develop these safer, non-ozone depleting alternatives to the older technology, environmentally unfriendly CFC and HCFC refrigerants, in compliance with global legislation for their phase-out.

To ensure that customers are fully supported in this transition, Honeywell has dedicated its research resources to developing a comprehensive range of alternative intermediate and long-term refrigerants, that are not only safer to use but that are able to meet or surpass the performance levels of the products they replace.

For commercial and industrial refrigeration replacement of (CFC) Genetron 502 and (HCFC) Genetron 22 are the industrys principle focus. Honeywells long-term solutions for low and medium temperature applications are Genetron 507 and Genetron 404A, both non-ozone depleting refrigerants. Genetron 507 is an azeotropic blend of HFC-125 and HFC-143a, and Genetron 404A is a blend of HFC-125, HFC-143a and HFC 134a. Both options can give a high level of efficiency with performance and characteristics similar to Genetron 502, and be used as replacements in retrofits as well as in new equipment.

Honeywell Refrigerants Gas is a global leader in the development and production of high-performance fluorocarbon refrigerants and thermal working fluids. Our customers include original equipment manufacturers, service technicians and facility managers, and consumers around the world.

The elimination of ozone-depleting refrigerants and chemicals continues to be a key environmental focus for Honeywell as countries phase out these chemicals in accordance with the international agreement Montreal Protocolon Substances that Deplete the Ozone Layer. We have invested in both R&D and manufacturing capacity to help countries and companies meet our commitments to this global effort by moving to non-ozone depleting alternatives.

At Honeywell, we see Responsible Care as the foundation of environmental, health and safety excellence in our business. We incorporate HSE management systems into all phases of the chemical life cycle. Our commitment to continuous health, safety and environmental performance improvement is evident at our facilities around the world it is the way we do business.

Boss White is a non poisonous pipe jointing compound which is clean and easy to apply acting as a lubricant whilst the joint is being assembled and tightened. It does not set hard, therefore enabling easy dismantling for subsequent alterations to the pipe work.

The compound is lead free and incombustible and will not deteriorate. Boss White is suitable for use on compressed air, natural gas, steam and non-potable hot and cold water services.

Pipe jointing compound is also commonly known as Pipe Dope, Pipe stag, Pipe Sealant and jointing paste.

Crane D171 Ball Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the D171 and D171EXS are WRAS approved.

Timeless and deliberate, the Composed collection embodies the beautifully understated elements of minimalist design. By eliminating unnecessary details, the collection is designed to elicit an emotional response with its stark, refined beauty. This 45Cm (17.71 Inch) towel bar complements composed faucets and accessories.

FEATURESWall MountedPremium metal construction for durability.Mounting Accessories includedChrome FinishCoordinates with faucets and accessories in the Composed collection.

Codes/StandardsNone Applicable

Formula 1 Carnauba Bike Clean 16 oz provides deep cleans the toughest bugs, tar and motorcycle road dirt.

Description:

Safe for paint, chrome and fairings

Gives all surfaces deep reflection and shine

• Easy to use: Just spray on and wipe off

The Makita Blower (model UB1103) is a go-to tool for fast clean upon the jobsite or in the workshop. The Blower is powered by a 6.8 AMP motor with a variable speed control dial and trigger with lock-on for added convenience. With a maximum air speed of 203 MPH and a maximum air volume of 145 CFM, youll get faster clean-ups. The blower can also be used as a vacuum; simply move the nozzle to the vacuum port and connect the dust bag.

• SPEED: Delivers a Maximum Air Speed of 203 MPH for Faster Job Site Clean Up
• PERFORMANCE: Variable speed control dial and trigger (0-16, 000 RPM) for increased performance
• EFFICIENCY: Maximum air volume of 145 cfm for faster clean up in larger areas
• CONVENIENCE: Two tools in one; quickly converts to a vacuum for added versatility
• INCLUDES: Nozzle and dust bag

The Makita Blower (model UB1103) is a go-to tool for fast clean upon the jobsite or in the workshop. The Blower is powered by a 6.8 AMP motor with a variable speed control dial and trigger with lock-on for added convenience. With a maximum air speed of 203 MPH and a maximum air volume of 145 CFM, youll get faster clean-ups. The blower can also be used as a vacuum; simply move the nozzle to the vacuum port and connect the dust bag.

• SPEED: Delivers a Maximum Air Speed of 203 MPH for Faster Job Site Clean Up
• PERFORMANCE: Variable speed control dial and trigger (0-16, 000 RPM) for increased performance
• EFFICIENCY: Maximum air volume of 145 cfm for faster clean up in larger areas
• CONVENIENCE: Two tools in one; quickly converts to a vacuum for added versatility
• INCLUDES: Nozzle and dust bag

The latest generation of O General wall mounted split air conditioners. The main futures of this generation is high powerefficiency and fast cooling distribution. Available models from 1.5 Ton to 3.0 Ton. O General wall mounted split acs are the best choice for apartments, offices, villas.

Canvas is commonly used with mastics or coatings to provide a protective barrier over pipe and ductinsulation. Stocks 6 oz. and 8 oz. varieties of canvas.Its 100% cotton fabric used for insulation of Galvanized Steel ducting.

6 oz. Canvas Specifications:

• First Quality Material
• 100% cotton greige single filled osnaburg
• Approximately Width -1 YARD (36inch) x Lgth- 20YARD (720inch)
• Thread Count = 36 x 28
• Weight = .51 Lbs/LY

Ideal for :Construction & Public Works / Finishing & Infrastructure / Logistics & Transport, Services / High-Tech & Automotive / Handworkers, Craftsmanship

PRODUCT NUMBER: 70720

Suitable for :Outside

Ideal for :Construction & Public Works / Finishing & Infrastructure / Logistics & Transport, Services / High-Tech & Automotive / Handworkers, Craftsmanship

Dielectric Unions features a female steel pipe thread to female brass pipe thread connections. These unions are designed to be installed between pipes made from dissimilar metals to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It Consists of a union nut, two tailpieces, a gasket & a sleev that separates the tailpieces to prevent an electric current from occurring. This is ideal in applications such as commercial and residential as hot water storage tanks, chilled water, processing tanks, steam, gas and other water piping applications.

Keep your drains clean with this set of 10 rod drain cleaners. Easy to use, its a fast DIY alternative to calling your plumber. Its sturdy rods attaches to form one long rod and includes a plunger attachment. This is a handy tool to have in your home for plumbing emergencies.

Available in unique, convenient ENECON A Packs.

METALCLAD SpeedAlloy is a quick curing, 100% solids, polymeric leak stopper used for making fast, effective repairs to equipment which must be returned to service almost immediately.

METALCLAD SpeedAlloy has a paste consistency when first mixed then transforms into a metal-hard composite in just minutes.

Timeless and deliberate, the Composed collection embodies the beautifully understated elements of minimalist design. By eliminating unnecessary details, the collection is designed to elicit an emotional response with its stark, refined beauty. This 45Cm (17.71 Inch) towel bar complements composed faucets and accessories.

FEATURESWall MountedPremium metal construction for durability.Mounting Accessories includedChrome FinishCoordinates with faucets and accessories in the Composed collection

Company HERZ always think about future, trying to extend the product range in order to fulfill every demand, and every task that industry gives. One of the latest products that were introduced by HERZ is the Compact Connect 4 -simple and reliable fan coil connection if the project requires a special compact solution- we are happy to serve. Everything needed for a successful connection of the terminal unit is supplied in one package.

Advantages:Minimized design time and risks due to complete solutionPerfect performance of the complete unitCompact design for limited space availabilityMinimized installation and commissioning costsAllows easy flushing and coil isolationSimple attachment to existing hangersIntegrated fi tting lug for ease of installationHigh comfort with minimized operation and maintenancecostsConnecting kit for terminal unitsReduced on-site working timeFactory proved for minimum leakage riskNo flushing via the regulating valve

Technical dataMax. operating pressure 16 barMin. operating temperature 20 CMax. operating temperature 130 CLift 4 mmThe integrated control unit together with the actuating drive is responsible for modular control. Various actuating drives mightbe used (see also chapter: Accessories and spare parts).kvs values of PIBCVDN 15 0, 94 m/hDN 20 1, 71 m/h

AerofoamNBR Rubber Insulation Rolls and Sheetsare closed cell elastomeric foam structures with a non-porous composition that offers high thermal efficiency and protection from imminent condensation problems, and helps as sound absorber. Depending on the requirements of the market, this product can be coated with different types of foils and have a factory-applied self-adhesive backing. The installation time is reduced more than 40% due to the ease in cutting as well as quick adhesion of the material.

AerofoamNBR Rolls and Sheets come in handy where Aerofoam(NBR) Nitrile Tubes cannot be used on pipes with big diameter. Other applications include ventilation ducts, tanks, and reservoirs, engine rooms assound and thermal protection. Not only are they environmentally friendly, they pose no harm to human health, it has zero Ozone Depletion Potential (ODP), Global Warming Potential (GWP) of less than five, and a low Volatile Organic Compound (VOC) of less than 6 g/m2/hr in 24 hours. Aerofoam NBR Rolls and Sheets comply with LEED requirements.

• Big diameter pipes (where tubes cant be used)
• Ventilation ducts
• Tanks, reservoirs
• Engine rooms (as sound attenuates)
• Fittings (valves, flanges, bends)

• Fire rated CLASS O as per BS 476 Parts 6 & 7;
• Very low water vapor permeance (0 perms);
• High water vapor diffusion factor (> 17, 000);
• Very low water absorption rate (0.06% by volume);
• High thermal efficiency (24 C= 0.033 W/mK; 46 C= 0.035 W/mK);
• Wide temperature range (from -50 C to +105 C);
• Chemical resistance resistant to most chemicals (sodium, silica, fluoride, chloride, etc.);
• Antibacterial & antifungal;
• Environmental friendly ODP = 0 and GWP < 5;
• Very low VOC emission level ( < 6 g/m2/hr in 24 hours);
• Sound absorption properties;
• Easy and fast to install.

The ANBI collection is designed to be inviting, homely and user-friendly the perfect addition to a modern bathroom.The Hotel seriesrange gives you a simple contemporary design that compliments almost any style. ANBIdesign and manufacture their products using the finest methods and materials to ensure a high quality product.

AerofoamNBR Rubber Insulation Rolls and Sheetsare closed cell elastomeric foam structures with a non-porous composition that offers high thermal efficiency and protection from imminent condensation problems, and helps as sound absorber. Depending on the requirements of the market, this product can be coated with different types of foils and have a factory-applied self-adhesive backing. The installation time is reduced more than 40% due to the ease in cutting as well as quick adhesion of the material.

AerofoamNBR Rolls and Sheets come in handy where Aerofoam(NBR) Nitrile Tubes cannot be used on pipes with big diameter. Other applications include ventilation ducts, tanks, and reservoirs, engine rooms assound and thermal protection. Not only are they environmentally friendly, they pose no harm to human health, it has zero Ozone Depletion Potential (ODP), Global Warming Potential (GWP) of less than five, and a low Volatile Organic Compound (VOC) of less than 6 g/m2/hr in 24 hours. Aerofoam NBR Rolls and Sheets comply with LEED requirements.

• Big diameter pipes (where tubes cant be used)
• Ventilation ducts
• Tanks, reservoirs
• Engine rooms (as sound attenuates)
• Fittings (valves, flanges, bends)

• Fire rated CLASS O as per BS 476 Parts 6 & 7;
• Very low water vapor permeance (0 perms);
• High water vapor diffusion factor (> 17, 000);
• Very low water absorption rate (0.06% by volume);
• High thermal efficiency (24 C= 0.033 W/mK; 46 C= 0.035 W/mK);
• Wide temperature range (from -50 C to +105 C);
• Chemical resistance resistant to most chemicals (sodium, silica, fluoride, chloride, etc.);
• Antibacterial & antifungal;
• Environmental friendly ODP = 0 and GWP < 5;
• Very low VOC emission level ( < 6 g/m2/hr in 24 hours);
• Sound absorption properties;
• Easy and fast to install.

End Feed fittings are our lightweight solution for joining copper tubes which match the BS EN 1057 standard.

End Feed Fittings, manufactured in both Copper and Bronze, are a fast, reliable and economic method of joining BS EN 1057 copper tube.

End Feed Fittings connect to copper tube through the process of capillary action with solder forming an easy, effective joint between the fitting and the tube. They are lightweight for easy handling and lend themselves well to confined environments due to their compact sizing.

End Feed fittings are our lightweight solution for joining copper tubes which match the BS EN 1057 standard.

We have a full range available at our Al Quoz & Deira branches, from 15mm 159mm, in both copper and bronze, to provide you with all you will need for your installation.

ANBI Groupone of the oldest & largest suppliers of RefronRefrigerant Gasesin Dubai, Sharjah, Abu Dhabi, Ras Al Khaimah & MEA region.

We will offer thebest prices for products of the highest quality.

Shut Off sprayer set brixia consisting of shut offspray in ABS. Wall support in ABS for shutt off spray.

Water is natures most essential element and has been used for centuries for daily personal hygiene. Washing with water has long been accepted to be healthier and more comfortable than toilet paper. Studies have shown that regular usage of water may benefit those suffering from itching, irritation, and discomfort.

Hand-held bidet spray system offers the comfort, promotes better personal hygiene for you and your family. Easy to use even by children, handicapped and the elderly.

ABS Plastic constructionPositive shut-offWe recommend to use a shut-off valve when installing this item

Note: Always shut off water supply when not in use !

Set Includes: Hand spray gun120Cm CP flexible hoseWall bracket with fasteners

Available Finish: Chrome only

Body made of forged brass according to EN 12420, nickel plated, seals PTFE. Chrome-plated ball with full bore. Female thread according to ISO 228 Operating temperature range from -30 C to 150 C. (Water from 0 C to 110 C), for all non-aggressive media such as water, oil, air, fuel oil or lubricating oil.

FEATURES

1. Easily connects to toilets without tools or a plumber
2. Adjustable pressure for gentle rinsing
3. Pays for itself by reducing toilet paper use by 80%

CONTENTS

1. Bidet Spray White 1 No
2. White Flexible Long Nut 120Cm 1 NO
3. Bidet Spray Holder White 1 NO
4. Fastner Kit 1 SET