Pressure Switches #6319137

The INLINE flow sensor/switch Type 8010 is specially designed for use in pure and water resembling fluids, free from air bubbles and magnetizable particles, to monitor minimum/ maximum values of flow. The sensor/switch is made up of a fitting (Type S010) and an electronic module (Type SE10), quickly and easily connected together by a Quarter-Turn. This device indicates the presence of a flow in the pipe by switching the Reed contact contained in the electronic module. The switching points Min./Max. for rising and falling velocities can be set with a screw within a defined range.

• Economic integration in pipe systems without
• any additional piping
• Magnetic measuring principle
• Mechanical adjustment of setpoint
• Pipe diameter DN 15 to 50
• Switching range 4.7 up to 75.4 l/min
• Flow velocity max. 10 m/s

This intelligent mini transmitter/switch with an extra-large display is specially designed to switch alarms and to establish a monitoring system or an On/Off control loop. The switching points can be programmed with the three-key keypad under the display. In addition, the process value can be transmitted to the PLC (4-20 mA). The connection to the process in the piping is made using standard fittings (G1/2, NPT1/2, Rc1/2).

• Bayonet ring case with blow-out device per
• EN 837-1
• Case and pressure element assembly of
• stainless steel
• Degree of protection IP 65
• Accuracy class 1.6 per EN 837-1

Because of its robust design, the BN2200 is suitable for use in tough environments in the chemical industry, in ocean shipping and in process engineering. The pressure measuring device is suited for measuring liquids and gases; with open measuring flange also designed for viscous media and media containing solids. The pressure switches are suited for connection to Zone 0, when fitted by manufacturer with Zone 0 adapter.

• Case DN 100 with rear blow-out device
• Case and pressure element assembly of
• stainless steel, diaphragm of Duratherm
• Nominal ranges 60 mbar up to 4 bar
• EC type-examination per Directive 97/23/EG,
• certificate no. 07 202 1837 Z 0006/2/0004