Industrial Valves #5857689

FEVISAValves has very extended experience inmanufacturing of Cast Iron and Ductile Iron Check Valves

Size1/2 to 24(DN 15 to DN 600)

Pressure Rating:PN10/16/25/40

Materials:Carbon Iron/ Ductile Iron

End Connection:Flanged FF/RF/RTJ

Specification & Standard:

• Fact to Face:DIN 3202 F6 /F1
• Flange End:DIN 2533 /2501 & ANSI B16.10 (125lb)
• Testing & Inspection:DIN 3202
• Confirms to MSS SP-71
• Flanges Drilled:ANSI B16.1(125lb)
• Flange type:EN 1092-2, ANSI B16.1

Suitable Medium:Water, Steam, Petroleum Products, Waste water, Food Stuff, Steam all Kinds of acid and alkaline liquid etc.

Types:Swing Check, Swing Check Rubber Coated Disc, Lift Check, Wafer Type

Working Temperature: Water

FEVISAValves has very extended experience in manufacturing of Air Release Valves.

Size Range:1-12(DN25-DN300MM)

Model:

• FV-ARV-0025-BP
• FV-ARV-0032-BP
• FV-ARV-0040-BP
• FV-ARV-0050-BP
• FV-ARV-0050
• FV-ARV-0080
• FV-ARV-0100
• FV-ARV-0150
• FV-ARV-0200
• FV-ARV-0300

Pressure Rating: Threaded:1.0 Mpa, 1.6 MpaFlanged:1.0 Mpa, 1.6 Mpa, 2.5 Mpa

Working Temperature:-10C to 80C

Materials:Carbon Steel, Stainless Steel, Alloy Steel, Cast Iron, Ductile Iron, etc.

Features:

• Advanced design with simple mechanism, strong float to prevent cracking during sudden water hammer & quick closure.
• Aerokinetic mechanism to resist blow shut under higher air velocity even up to sonic velocity of air.
• No arms or levers to prevent vibrating, bending, direct closure of the float.
• Smooth cage outside of the float, keep float moving in specified guide rail.
• Bottom rubber buffer for collision prevention, and drain easy with proper holes around the cage during vacuum.
• Outside screen will be an option for safety and prevent insects or birds in.
• Fully Fusion epoxy coated inside and outside of valve body for long-term services.
• Manufacturing standard meets BS EN1074-4, AWWA C512
• Flange drilling and dimension meets BS EN 1092 and BS EN 558 and ANSI flange

FEVISAValves has very extended experience inmanufacturing of Forged Swing/Piston Type Check Valves

Size: up to 2(DN 15 up to DN 2500)

Pressure Rating:ASME 150# to 2500#

Materials:Forged Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

End Connection:Flanged RF, FF, RTJ, BW, NPT (F & M), SW Ends

Specification:

• Design ASME B16.34/API602
• Face to Face ASME B16.10
• End Flange ASME B16.5
• BW End ASME B16.25
• SW End ASME B16.11
• Test API598
• Special NACE MR-01-75

Features:

• Bolted Cover with spiral-wound gasket, Threaded and seal Welded Bonnet or threaded and Pressure Seal Bonnet
• Swing or Piston Disc

FEVISAValves has very extended experience inmanufacturing of Resilient Seated Gate Valves

Size2 to 12(DN 50 to DN 300)

Pressure Rating:PN10/16

Materials:Carbon Iron/ Ductile Iron

End Connection:Flanged FF/RF/RTJ

Operator:Hand wheel, Nut, Extension stem, Gear operator

Working temperature:NBR

FEVISAValves has very extended experience inmanufacturing of Wellhead Slurry Gate Valves.

Size:

2-1/16 to 7-1/16

Pressure Rating:2000Psi-20000Psi

Temperature:-50F 250F, Ratings: K, L, P, R, S, T, U, V

Design:API 6A/API 6D

Materials: AA, BB, CC, DD, EE, FF

End Connection:Flanged RF Ends, RTJ Ends, Threaded Ends, Union Ends, Welded Ends

Product Specification Level:PSL1-PSL4

Performance Requirement Level:PR1, PR2

Features:

• Mainly used as closed circuit equipment on the transport piping of high-pressure slurry in the drilling industry

FEVISAValves has very extended experience inmanufacturing Hydraulic Adjustable Choke Valves

Size: 2 1/16-up to 7 1/16

Pressure Rating:2000 psi to 20000 psi

Materials:Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

End Connection:Flanged RF/RTJ, FNPT, UNION, BW Ends

Actuator:Hydraulic Actuator Operated

Specification & Standards:

• Design API 6A
• Face to Face API 6D
• End Flange API 6D
• Test API598/API6D
• Special NACE MR-01-75

Features:

• Strengthening treatment
• Wear- Resistance, scour resistance
• Reliable performance
• Automatic Reset
• Hydraulically actuated
• Flow Adjustment is indicated on a measuring scale.
• Carbide alloy is embedded into cone head of valve, flow nipple, plunger and orifice plate.

FEVISAValves has very extended experience inmanufacturing of Wellhead Expanding Gate Valves.

Size:

1-13/16 to 7-1/16

Pressure Rating:2000Psi-20000Psi

Temperature:-50F 250F, Ratings: K, L, P, R, S, T, U, V

Design:API 6A

Materials: AA, BB, CC, DD, EE, FF

End Connection:Flanged RF Ends, RTJ Ends, Threaded Ends, Union Ends, Welded Ends

Product Specification Level:PSL1-PSL4

Performance Requirement Level:PR1, PR2

Features:

• Metal seal in the sealing contacts.
• Backseat seal between the stem and the bonnet, easy for the change of sealing stuff under pressure.
• Sealing surface is hard-faced or the QBQ with the performance of anti-corrosion, wear-resistance.
• Specially used in the super high temperature working condition.

FEVISAValves has very extended experience inmanufacturing of Wellhead Pneumatic Gate Valves.

Size:2-1/16 to 7-1/16

Pressure Rating:2000-20000Psi

Temperature:-20F 250F

Temperature Ratings: K, L, P, R, S, T, U, V

Design:API 6A

Materials:AA, BB, CC, DD, EE, FF

End Connection:Flanged RF Ends, RTJ Ends, Threaded Ends, Union Ends, Welded Ends

Product Specification Level:PSL1-PSL4

Performance Requirement Level:PR1, PR2

Features:

• Pneumatic Actuator installed on the top of the bonnet which controls the open and close of the valve by pneumatic pressure.
• Metal Seal between the Body and Bonnet.
• Backseat seal between the stem and the bonnet, easy for the change of sealing stuff under pressure.
• Sealing surface is hard-faced or the QBQ with the performance of anti-corrosion, wear-resistance.
• Low operating Torque

FEVISAValves has very extended experience inmanufacturing of Wellhead Non Rising Gate Valves.

Size:1-13/16 to 7-1/16

Pressure Rating: 2000-20000Psi

Temperature:-20F 250F

Temperature Ratings: K, L, P, R, S, T, U, V

Design:API 6A

Materials:AA, BB, CC, DD, EE, FF

End Connection:Flanged RF Ends, RTJ Ends, Threaded Ends, Union Ends, Welded Ends

Product Specification Level:PSL1-PSL4

Performance Requirement Level:PR1, PR2

Features:

• Metal Seal between the Body and Bonnet
• Backseat seal between the stem and the bonnet, easy for the change of sealing stuff under pressure.
• Sealing surface is hard-faced with the performance of anti-corrosion, wear-resistance
• The installed switch indicator are able to indicate the open or close position of the valve.
• Low operating Torque

FEVISAValves has very extended experience inmanufacturing Adjustable Choke Valves

Size: 2 1/16up to 24

Pressure Rating:2000 psi to 20000 psi

Materials:Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

End Connection:Flanged RF/RTJ, FNPT, UNION, BW Ends

Operator / Actuator:Lever, Gear, Actuator (Pneumatic, Hydraulic, Motorized, Electro-Hydraulic)

Specification & Standards:

• Design API 6A
• Face to Face API 6D
• End Flange API 6D
• Test API598/API6D
• Special NACE MR-01-75

Features:

• Manufactured and tested in accordance with API6A
• Carbide alloy is embedded into stem needle of valve, seat.
• Flow adjustment is indicated on a measuring scale.
• Max orifice: 1-3.
• Composite rubber-plastic stem lip packing reduces operating torque
• Wear- Resistance, scour resistance
• Reliable performance

FEVISAValves has very extended experience inmanufacturing Positive Choke Valves.

Size: 2 1/16up to 5 1/8

Pressure Rating:2000 psi to 20000 psi

Materials:Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

End Connection:Flanged RF/RTJ, FNPT, UNION, BW ends

Specification & Standards:

• Design API 6A
• Face to Face API 6D
• End Flange API 6D
• Test API598/API6D
• Special NACE MR-01-75

Features:

• Field interchangeability with many other common H2 design components.
• Field convertible from positive to adjustable by changing out the bonnet assembly or cap assembly.
• Metal bonnet/cap seal is optional.
• Manufactured and tested in accordance with API 6A.
• Tungsten carbide and ceramic choke bean are all available.
• Wear- Resistance, scour resistance
• Reliable performance

FEVISAValves has very extended experience inmanufacturing of Cast Iron and Ductile Iron Gate Valve.

Size2 to 16(DN 50 to DN 400)

Pressure Rating:PN10/16

Materials:Carbon Iron/ Ductile Iron

End Connection:Flanged FF/RF/RTJ

Operator: Hand wheel, Nut, Extension stem, Gear operator

Working temperature:

FEVISAValves has very extended experience inmanufacturing of Knife Gate Valves

Size: 2 up to 60(DN 15 up to DN 1500)

Pressure Rating:ASME 150#, 300#, 600#, 900#, 1500#, 2500#

Materials:Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

End Connection:Flanged RF, FF, RTJ, BW

Operator / Actuator:Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized

Features:

• Uni Directional, Wafer Type
• Metal Seated / Resilient Seated
• Single Piece Construction
• 150 PSI CWP
• Standard: MSS SP-81

FEVISAValves has very extended experience inmanufacturing of Cast Iron and Ductile IronButterfly Valves (Wafer / Lugged / Flanged)

Size2 to 24(DN 50 to DN 600)

Flanged Double Eccentric Butterfly Valve Sizes:4 to 80 (DN 100 to DN 2000)

Pressure Rating:PN10/16/25, ANSI 125/150

Materials:Carbon Iron/ Ductile Iron & Cast Steel

Seat Material: EPDM, NBR, PTFE, VITON

End Connection:Flanged FF/RF/RTJ, Wafer, Lugged Ends

Operator: Hand wheel, Gear operator, Actuator

Specification & Standard:

• Design standard:MSS SP-67, BS 5155, API 609
• Suitable For Flanges:ANSI, DIN, BS, JIS
• Body and Disc in Ductile Iron Epoxy Coated.
• Fact to Face length:ISO 5752 Series F4
• Body Flange:EN1092-2 PN10/16/25
• Testing:ISO 5208
• Coupling Flange for Electric Actuator:ISO5211