VALTRONICS DWC LLC

dubai, United Arab Emirates

FEVISAValves has very extended experience inmanufacturing of Wellhead Surface Safety Valve.

Size:2 1/16 up to 7 1/16

Pressure Rating:2000psi to 20000psi

Materials:Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

End Connection:Flanged RF/RTJ, BW, FNPT, UNION

Operator:Hydraulic Actuator, Pneumatic Actuator

Specification & Standards:

• Design API 6A
• End Flange ASME B16.5
• BW End ASME B16.25
• Test API598
• Special NACE MR-01-75

Features:

• Reverse-acting gate
• The Hydraulic actuator, diaphragm and piston actuator can serve for the clients requirements according to different working conditions.

There are two types of safety valve, pneumatic and hydraulic safety valve in accordance with the actuation

• Metal seal between the body and bonnet
• Remotely operated with a high safety performance
• PR2 gate valve with along service life
• Used as a master valve or a wing valve
• Recommended for use in high pressure and /or large bore applications
• It is operated by a remote emergency shutdown device.

The sensing system can be attached to sense the pressure differential in the pipeline in case the immediate pressure differential damage the staff or the equipments.

FEVISAValves has very extended experience inmanufacturing of Three Way Ball Valves

Size1/2 to 8(DN 15 to DN 200)

Pressure Rating:ASME 150# to 300#

Materials:Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

Seating:Soft Seated (PTFE/RPTFE /PEEK/NYLON/DEVLON) and Metal Seated

End Connection:Flanged FF/RF/RTJ

Operator / Actuator:Lever/Wrench, Gear, Actuator (Pneumatic, Hydraulic, Electric, Motorized, Electro-Hydraulic)

Specification:

• Design ASME B16.34/API 6D
• Face to Face ASME B16.10
• End Flange ASME B16.5
• Test API598

Features:

• The Monolithic & Two Piece Cast Steel Body
• Bore Type Full Bore
• Floating Ball Valves
• Blow- Out Proof Stem

FEVISAValves has very extended experience inmanufacturing of Blow out Preventers. The BOP is well Control equipment are mainly applied in operation of drilling, work-over and well testing etc. to control wellhead pressure, effectively prevent the occurrence of the blowout accident and secure drilling operation.

Size:7. 1/16 to 21. 1/4

Working Pressure Ranking:14MPa to 105MPa

Pressure Rating:3000psi to 15000psi

Materials:Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

Operator / Actuator:Actuator (Hydraulic, Pneumatic)

Specification & Standards:

• Design API 16A
• Test API598/API6D
• Special NACE MR-01-75

Types:

• Ve Single RAM Bop
• Ve Double RAM Bop
• Ve-Z Single RAM Bop
• Ve-Z Double RAM Bop
• ANNULAR BOP

Features:

• Major components are forged or cast for uniform strength, impact resistance and freedom from defects.
• Floating sealing is applied to the cylinder cover and the open/close of the cover is realized by hydraulic power, so it is quick and convenient for charging rams.
• The auxiliary oil cylinder affords a smaller volume with same function.
• The ram rubber has massive storage volume, and it adopts self-contained sealing.
• The standard configuration includes manual locking devices, which ensures the ram is closed tightly in case is the hydraulic pressure loss.
• Both manual and hydraulic locking device and the auxiliary oil cylinder can be installed flexibly into different positions according to customers requirements and the installation positions can be changed easily.