VALTRONICS DWC LLC

dubai, United Arab Emirates

FEVISAValves has very extended experience inmanufacturing of Wellhead Surface Safety Valve.

Size:2 1/16 up to 7 1/16

Pressure Rating:2000psi to 20000psi

Materials:Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

End Connection:Flanged RF/RTJ, BW, FNPT, UNION

Operator:Hydraulic Actuator, Pneumatic Actuator

Specification & Standards:

• Design API 6A
• End Flange ASME B16.5
• BW End ASME B16.25
• Test API598
• Special NACE MR-01-75

Features:

• Reverse-acting gate
• The Hydraulic actuator, diaphragm and piston actuator can serve for the clients requirements according to different working conditions.

There are two types of safety valve, pneumatic and hydraulic safety valve in accordance with the actuation

• Metal seal between the body and bonnet
• Remotely operated with a high safety performance
• PR2 gate valve with along service life
• Used as a master valve or a wing valve
• Recommended for use in high pressure and /or large bore applications
• It is operated by a remote emergency shutdown device.

The sensing system can be attached to sense the pressure differential in the pipeline in case the immediate pressure differential damage the staff or the equipments.

FEVISAValves has very extended experience inmanufacturing of Three Way Ball Valves

Size1/2 to 8(DN 15 to DN 200)

Pressure Rating:ASME 150# to 300#

Materials:Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

Seating:Soft Seated (PTFE/RPTFE /PEEK/NYLON/DEVLON) and Metal Seated

End Connection:Flanged FF/RF/RTJ

Operator / Actuator:Lever/Wrench, Gear, Actuator (Pneumatic, Hydraulic, Electric, Motorized, Electro-Hydraulic)

Specification:

• Design ASME B16.34/API 6D
• Face to Face ASME B16.10
• End Flange ASME B16.5
• Test API598

Features:

• The Monolithic & Two Piece Cast Steel Body
• Bore Type Full Bore
• Floating Ball Valves
• Blow- Out Proof Stem

FEVISAValves has very extended experience inmanufacturing of Cast Iron and Ductile Iron Strainers (Y Type & Basket)

Size1/2 to 12(DN 15 to DN 300)

Pressure Rating:PN10/16

Materials:Carbon Iron/ Ductile Iron

End Connection:Flanged FF/RF/RTJ, FNPT Ends

Specification & Standard:

• Fact to Face:DIN 3202 F1
• Design Standard :DIN 86251
• Flange End:DIN 2533 /2501
• Testing & Inspection:DIN 3202
• Screwed Ends:BSP Screwed

Suitable Medium:Water, oil, Gas.

Types:Y-Type, Mud Type

Working Temperature: Water

FEVISAValves has very extended experience inmanufacturing of Choke Manifolds. The choke manifolds is a necessary piece of equipment used for controlling the well kick and implementing oil-gas well pressure control technologies.

Size:2 1/16 to 5 1/8

Pressure Rating:3000psi to 15000psi

Materials:Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

End Connections:Flanged & Union & Thread

Operator:Manual hand wheel operator, Hydraulic and pneumatic operator

Specification & Standards:

• Design API 6A/16C
• Test API598/API6D
• Special NACE MR-01-75

Features:

• Rugged Design
• Flawless finish
• High Quality
• Choke and kill manifolds containing the main follow components hand well valves, hydraulic actuated valves, adjustable chokes, drilling chokes, check valves, pressure Gauges.
• It is also used for blowout protection (BOP) in order to protect the wellhead in the event that in-hole pressure exceeds certain limits
• Through opening and closing the choke valve it can control certain pressure so as to maintain a bottom hole pressure that is higher than the formation pressure
• No of Valves 4 or 5 and also customer requirements.
• Two flow paths, one through a positive choke, and one through an adjustable choke that can be converted to a positive choke
• Control flow with a calibrated orifice for flow rate reference
• Fast choke changes without interrupting the flow
• Reduce effluent pressure before entering process equipment

FEVISAValves has very extended experience inmanufacturing of Kill Manifold.

Size:

2-1/16 to 7-1/16

Pressure Rating:2000Psi-15000Psi

Temperature:-50F 250F, Ratings: K, L, P, R, S, T, U, V

Design:API 6A / API 16C

Materials: AA, BB, CC, DD, EE, FF

End Connection:Flanged RF Ends, RTJ Ends, Threaded Ends, Union Ends, Welded Ends

Product Specification Level:PSL1-PSL4

Performance Requirement Level:PR1, PR2

Features:

• On-site Maintenance
• High performance valve seat for reliable seal
• Design Specifically for Abrasive and Erosive use

FEVISAValves has very extended experience inmanufacturing of Blow out Preventers. The BOP is well Control equipment are mainly applied in operation of drilling, work-over and well testing etc. to control wellhead pressure, effectively prevent the occurrence of the blowout accident and secure drilling operation.

Size:7. 1/16 to 21. 1/4

Working Pressure Ranking:14MPa to 105MPa

Pressure Rating:3000psi to 15000psi

Materials:Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

Operator / Actuator:Actuator (Hydraulic, Pneumatic)

Specification & Standards:

• Design API 16A
• Test API598/API6D
• Special NACE MR-01-75

Types:

• Ve Single RAM Bop
• Ve Double RAM Bop
• Ve-Z Single RAM Bop
• Ve-Z Double RAM Bop
• ANNULAR BOP

Features:

• Major components are forged or cast for uniform strength, impact resistance and freedom from defects.
• Floating sealing is applied to the cylinder cover and the open/close of the cover is realized by hydraulic power, so it is quick and convenient for charging rams.
• The auxiliary oil cylinder affords a smaller volume with same function.
• The ram rubber has massive storage volume, and it adopts self-contained sealing.
• The standard configuration includes manual locking devices, which ensures the ram is closed tightly in case is the hydraulic pressure loss.
• Both manual and hydraulic locking device and the auxiliary oil cylinder can be installed flexibly into different positions according to customers requirements and the installation positions can be changed easily.

FEVISAValves has very extended experience inmanufacturing of Floating Ball Valves

Size up to 10(DN 15 up to DN 250)

• to 10 150#
• to 8 300#
• to 4 600#
• to 1 900#, 1500# & 2500#

Pressure Rating:ASME 150# to 2500#

Materials:Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

Seating:Soft Seated (PTFE/RPTFE /PEEK/NYLON/DEVLON) and Metal Seated

End Connection:Flanged RF/RTJ, BW, FNPT & SW Ends

Operator / Actuator:Lever, Gear, Actuator (Pneumatic, Hydraulic, Motorised, Electro-Hydraulic)

Specification & Standards:

• Design ASME B16.34/BS5351
• Face to Face ASME B16.10
• End Flange ASME B16.5
• BW End ASME B16.25
• Test API598/API6D
• Fire Safe Test API607/API6FA
• Special NACE MR-01-75

Features:

• One Piece, Two Piece, Three Piece, Fully Welded
• Anti- Static Device
• Blow- Out Proof Stem
• Fire Safe Design
• Low Emission

FEVISAValves has very extended experience inmanufacturing of TrunnionMounted Ball Valves

Size2 to 60(DN 50 to DN 1500)

Pressure Rating:ASME 150#, 300#, 600#, 900#, 1500#, 2500#

Materials: Forging and Casting Type Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

Seating:Soft Seated (PTFE/RPTFE /PEEK/NYLON/DEVLON) and Metal Seated

End Connection:Flanged FF/RF/RTJ, BW Ends

Operator / Actuator:Lever/Wrench, Gear, Actuator (Pneumatic, Hydraulic, Electric, Motorized, Electro-Hydraulic, Gas over Oil)

Specification:

• Design ASME B16.34/API 6D
• Face to Face ASME B16.10/API 6D
• End Flange ASME B16.5
• BW End ASME B16.25
• Test API598/API 6D
• Fire Safe Test API607/API6FA
• Special NACE MR-01-75

Features:

• Bolted Body Two Piece/Three Piece and Fully Welded
• Bore Type Reduced Bore and Full Bore
• Anti- Static Device
• Blow- Out Proof Stem
• Fire Safe Design
• Emergency Sealant Injector
• Double Block and Bleed

FEVISAValves has very extended experience inmanufacturing of Wafer Butterfly Valves

Size: 2 up to 80(DN 15 up to DN 2000)

Pressure Rating:ASME 150#, 300#, 600#, 900#, 1500#, 2500#

Materials: Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

End Connection:WAFER RF, WAFER LUGGED RF

Operator / Actuator:Lever/Wrench, Gear, Actuator (Pneumatic, Hydraulic, Motorized, Electro-Hydraulic)

Specification:

• Design ASME B16.34 / API609
• Face to Face ASME B16.10
• End Flange ASME B16.5
• BW End ASME B16.25
• Test API598
• Special NACE MR-01-75

Features:

• Extended Bonnet For Cryogenic Services
• Locking Device Optional

FEVISAValves has very extended experience inmanufacturing of Cast Gate Valves

Size: 2 up to 60(DN 15 up to DN 1500)

Pressure Rating:ASME 150#, 300#, 600#, 900#, 1500#, 2500#

Materials:Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.

End Connection:Flanged RF, FF, RTJ, BW

Operator / Actuator:Hand wheel, Gear, Actuator (Pneumatic & Motorized

Specification:

• Design ASME B16.34 / API 600
• Face to Face ASME B16.10
• End to End ASME B16.10
• End Flange ASME B16.5
• BW End ASME B16.25
• Test API598
• Special NACE MR-01-75

Features:

• Bolted Bonnet with spiral-wound gasket, Threaded and seal Welded Bonnet or threaded and Pressure Seal Bonnet
• Solid Wedge / Flexible Wedge
• Full port or Conventional Port
• Outside Screw and Yoke (OS&Y), Rising Stem
• Extended Bonnet For Cryogenic Services
• Locking Device Optional
• By pass on Request