Textile Machine #1487023

Hashima HPM-600CA is a Top Fusing Machine.

FEATURES

• Drum heater assures sufficient material heating from the every start of operation, just the same as flat type heating.
• Temperature is automatically controlled by means of an electronic thermostat and SSR, and it maintains a sensitive thermostatic switch that turns on and off alternately, and the control temperature difference range is always within 5.
• Uniformity and high pressure are maintained by a new air cylinder, a silicon rubber roller and pressure support roller.
• Anti-static type Teflon belt assures longer belt life, and belt cleaning and maintenance is easy made.
• Belt Warping Prevention Device (patent) maintains the belt at the same position at all times, so the operator needs only to insert the fabric.
• An inspection window in the center of the operation table provides a clear view of the fabric.

Hashima HP-900LF, LFS is a Straight Linear Fusing Machine.

FEATURES

• This is a continuous type machine therefore production is greatly increased.
• The automatic Belt Warping Prevention Device keeps both the upper and lower belts in the same position. Using the feed back system, damage is prevented. (Patent Pending)
• Using the electronic thermostat and the SSR, the temperature differences range is kept at 3. The SSRs electronic parts have no contact points making for durability.
• Various stackers can be used with this machine.
• This machine has a front conveyor belt which greatly increases production levels.
• The Rotary Strip Off Device can be attached as optional equipment.
• By pushing the heater control switch the temperature of the upper and lower or front and rear heater can be easily controlled. This means various materials can be used safely.
• The pressure roller is covered with a layer of silicon rubber. The upper and lower pressure rollers are completely separated when the pressure is set at 0.
• The heating plate is covered with special hard alumite, making it durable. The exchange of belts is very easy.
• The Belt Stopping Device stops the belt automatically if the belt warps therefore protecting the belt.
• The entrance of the feed in point can be adjusted easily according to the thickness of the material and interlining being used.
• An anti puckering roller is installed in this machine. This rollers position can be adjusted.
• Wing tables can be attached to the work table. When these tables are not in use, they can be folded down. (Option)
• The pressure is easily adjusted.
• Depending on which of the optional tables is used, various shapes can be easily pressed.

The roller type fusing machine from Kkashyap is a multi-purpose machine used not only for fusing but also for Creasing, Shrinkage, Transfer of Labels and Foils, Pressing & Leather printing. It is highly cost effective, durable and of excellent quality.

SALIENT FEATURES

• Available in different sizes ranging from 6"x24" to 18"x36"
• Renders permanent shape and classic elegance to collars and cuffs of Shirts, Coats and for permanent creases in trousers
• Equipped with a Temperature Control Box which consists of Timer & Heat Control Switch

BENEFITS

• Cost Effective
• High Production
• Correct combination of heat and time is attained for efficient performance
• Results equivalent to international standards

OP-600F/600FA is a straight linear fusing press machine. It isfor the fusing of woven/knitted fabrics.

FEATURES

• Automatically Cooling Shut Down.
• Equipped with the flexible wheel for convenient mobility.
• Continuous fusing system increases work efficiency.
• Heating monitor equipment controls heating system for smooth operation.
• Electronic thermostat and the special-made heating equipment minimize the temperature differences.
• Equipped with the special linear guidance belt to prevent the belt from warping, and having longer duration of the belt.

The machine is fully equipped with state-of-the-art features such as a higher presser foot lift, a double-capacity shuttle hook, and a direct-control machine head that ensures quick response and an accurate stop position.

The following features promise improved sewing capabilities for extra heavy-weight materials: A high-power, direct-drive motor that drives the needle with increased material-penetrating force; a higher-torque stepping motorthat increases the feed efficiency, and a pneumatic work clamp that increases the material clamping force.

Oshima OP-900/1000 is a straight linear fusing press machine.

FEATURES

• Continuous fusing system increases the productivity.
• The fusing width is 900mm and the length is endless.
• PCB and micro switch control the upper & lower belts automatically.
• Electronic thermostat and the relay controller to offer the stable temperature and diminish the temperature differences to the minimum.
• The heating are well monitored, to ensure the heating system working normally.
• The heating system distribute the heat evenly and can be used to all fabrics.
• The best quality of Teflon belt assures the precise temperature.
• With the wrinkle-free silicone roller to handle with all fabrics in perfect bonding.
• With the cooling fan and mesh conveyor belt, which has the best cooling effect.
• Auto stop micro switches ensure the belts away from damages.
• Standard with strong spring-pressure mechanism. No extra air-compressor is needed.
• Rotary Strip-off device for strengthening the cleaning function and avoid transforming on the finished fabrics.
• Special-designed clean rod to clean the belt completely, and it is easy for replacement once the rod gets dirty.
• Optional: A: Air (Pneumatic) Pressure B: Longer bottom belt

APPLICATION

• For the woven/knitted fabrics fusing
• Fuse the interlining (can work together with the feed/exit materials instrument).